PROFLO PFWSC5240 Two Handle Lavatory Faucet
Brand: PROFLO
Product Features
- Ceramic disc cartridges
- Metal lever handle
- Requires 3-hole sink with 4-inch (101.6 mm) on-center spacing
- Includes metal pop-up drain assembly
- 100% factory pressure tested
- Maximum flow rate: 1.2 gpm (4.5 L/min) at 60 psi
- EPA WaterSense approved
- cUPC/IAPMO listed
- ADA compliant
Model Numbers
Model Number | Finish |
---|---|
PFWSC5240CP | Chrome |
PFWSC5240ZBN | PVD brushed nickel |
PFWSC5240NORB | Oil rubbed bronze |
Product Specifications & Dimensions
A visual representation of the faucet is available, showing a chrome-finished two-handle lavatory faucet with a central spout and two separate handles.
Overall Dimensions:
- Width: 10 1/16 inches (255 mm)
- Height: 3 3/4 inches (97 mm)
- Spout Reach: 7 inches (177.3 mm)
- Spout Height: 5 3/8 inches (136.2 mm)
- Handle Height (from base): 6 1/4 inches (159 mm)
- Overall Height (from deck): Approximately 7 15/16 inches (202 mm)
Mounting and Connections:
- Requires a 3-hole sink installation with 4-inch (101.6 mm) on-center spacing.
- Water inlet connection thread: 1 1/2"-18UNEF.
- Water inlet diameter: 1 1/4 inches (31.75 mm).
Additional Details:
- Handle arc: 21 degrees.
- Base diameter: 2 1/8 inches (54 mm).
- Installation clearance for connections: 1 1/2 inches to 1 3/4 inches (38 mm to 46 mm).
- Pop-up drain rod length: 1 1/2 inches to 1 3/4 inches (38 mm to 46 mm).
*All measurements are nominal. Please verify before actual installation.
Warranty and Codes
This PROFLO faucet comes with installation, operating, care, and maintenance instructions.
PROFLO faucets carry a limited lifetime warranty when installed in residential applications. The warranty is five years for commercial applications.
Compliant with lead content requirements of California AB 1953 and Vermont S.152.
Certifications and Compliance
Low Lead CertifiedNSF/ANSI/CAN 372NSF/ANSI/CAN 61-9 (Q ≤ 1)UPC CertifiedADA Compliant [accessibility icon]