GE Flat Panel HD User Manual

Getting Started: Setting Up Your GE Flat Panel HD Antenna

This guide provides simple instructions to connect, place, and scan for channels with your GE Flat Panel HD TV Antenna. Ensure you perform a channel scan after installation for optimal performance.

1. Connect

Attach the antenna stand securely. Then, connect the antenna's coaxial cable to the corresponding input on your TV.

2. Place

Position the antenna on a flat surface in your desired viewing location. Extend the dipoles (the rabbit ears) as needed to achieve the best possible reception. Experiment with both horizontal and vertical orientations for optimal signal strength.

3. Scan

Perform a TV channel scan to find available over-the-air channels. Follow these steps:

1. Access your TV's setup or settings menu.
2. Select the option for 'scan', 'autotune', 'channel search', or 'channel scan'. Ensure this setting is configured to search for over-the-air channels, not cable channels.
3. Allow your TV to complete the channel scanning process.

Helpful Antenna Tips

• To maximize the number of channels received, test the antenna in various locations within your room. Remember to run a TV channel scan in each new position. Refer to your TV's instruction manual if you need assistance with this process.
• For the best signal reception, position the antenna as high as possible or near a window.
• Visit www.antennaweb.org to identify available television stations and the locations of broadcast towers in your area.
• If you move the antenna to a new location, always perform a rescan for over-the-air channels.

Customer Support

For questions or issues, please contact GE's U.S.-based Consumer Care team at 1-800-654-8483. They are available Monday through Friday, 7 AM to 8 PM Central Time.

Product Information:

• GE is a trademark of General Electric Company, licensed by Jasco Products Company LLC.
• Manufacturer: Jasco Products Company LLC
• Address: 10 E. Memorial Rd., Oklahoma City, OK 73114
• Website: www.byjasco.com
• This product is made in Vietnam.
• The paper packaging is 100% recyclable and made from 50% post-consumer waste. Visit byjasco.com/recycle for more information.

Register Your Product:

Register your product at byjasco.com/deals to receive exclusive offers and product updates.

Feedback:

If you like the product, consider leaving a review on your favorite retailer's website or Amazon.com.