Dreo Smart Pedestal Air Circulator Fan

Thanks for Choosing DREO!

Your support means the world to us. We hope you enjoy our product as much as we did creating it.

Follow us: @Dreo ⓕ ⓘ ?

Contents

1. Important Safety Instructions (Pages 1-2)
2. Assembling Your Pedestal Air Circulator (Pages 3-5)
3. Connecting to Your Pedestal Air Circulator (Page 6)
4. Knowing Your Pedestal Air Circulator (Pages 7-8)
5. Using Your Pedestal Air Circulator (Pages 9-13)
6. Cleaning and Maintenance (Pages 14-16)
7. Troubleshooting (Page 17)
8. Dreo Customer Care (Pages 18-20)

1. Important Safety Instructions

⚠️ WARNING:

General Safety:

• Children shall not play with the appliance. Cleaning and maintenance shall not be performed by children without supervision.
• Use the appliance as described in the user manual only. Any other use not recommended in the user manual may cause fire, electrical shock, or personal injury.
• This appliance can be used by children aged above 8 years and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of this appliance in a safe way and understand the hazards involved.

Operation Safety:

• Place the appliance on a flat, dry surface before use.
• Do not immerse in water and any other liquids.
• Do not use the appliance until the base is installed.
• Do not insert fingers, pencil, or any other objects into the grilles under any circumstances.
• Do not dismantle, repair, or modify. All servicing should be performed by qualified personnel.
• Do not operate the unit close to the curtain. Do not hang foreign objects on the grille to prevent damaging the balance of the fan or rotational structure.
• Do not operate the fan under overly humid, high-temperature, dusty environment or the place where acid or alkali is stored.
• Fans should never blow directly on infants, the elderly, and patients for a long time.

Electricity Safety:

• Make sure that the voltage of your electricity supply is the same as that indicated on the appliance.
• Always unplug before cleaning or leaving the appliance unused for a long period of time. Keep your hands dry when plugging/unplugging.
• Do not operate any air circulator with a damaged cord or plug. Discard air circulator or return to an authorized service facility for examination and/or repair.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
• WARNING: To reduce the risk of fire or electric shock, do not use this air circulator with any solid-state speed control device.
• Use 24V/1.5A power adapter only. Turn off the appliance before plugging.
• WARNING: To reduce the risk of fire, electric shock or injury to persons, do not use replacement parts that have not been recommended by the manufacturer (e.g., parts made at home using a 3D printer).
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

FOR HOUSEHOLD USE ONLY READ AND SAVE THESE INSTRUCTIONS

Gentle Reminder: Check the appliance regularly and refer to TROUBLESHOOTING or contact our customer support if it shows any of the following signs:

• Power cord or plug is damaged.
• Loud noise, unusual smell or excessive heat.

Specifications

2. Assembling Your Pedestal Air Circulator

When using the appliance for the first time, remove the wraps and attach the parts by following the steps below.

1. Push the air circulator into the base by aligning the cutout on the bottom of the air circulator with the jutting point in the middle of the base.

   [Diagram: Shows inserting the fan head into the base, aligning a cutout with a jutting point.]

2. Thread the screw through the flat washer, insert into the base, and use the included screwdriver to drive the screw into the bottom of the air circulator.

   [Diagram: Shows attaching the base with a screw and washer using a screwdriver.]

3. Put the air circulator upright, hold the main body while rotating the Adjustment Collar counterclockwise to raise or lower the air circulator to the desired height. (Adjustable: 0-5.9 inch)

   [Diagram: Shows adjusting the height using an "Adjustment Collar" by rotating it counterclockwise.]

4. Tighten the adjustment collar by rotating clockwise. Plug the power adapter into the power input (located at the back of the air circulator), and into the power outlet.

   [Diagram: Shows tightening the collar clockwise and plugging in the power adapter.]

ℹ️ CAUTION: Do not operate the air circulator if the base has not been installed.

Package Contents

The package includes:

• Air Circulator Unit
• Control Panel
• LED Display
• Base
• Adjustment Collar
• Remote Control (Battery Included)
• Power Adapter
• User Manual
• Quick Start Guide
• Flat Washer
• Screw for Base
• Screwdriver for Base
• Screwdriver for Grilles

[Diagram: Shows an exploded view of the fan components: Air Outlet, Air Inlet, Carry from Here, Power Input, Base, Adjustment Collar, Control Panel, LED Display, Remote Control, Power Adapter, Flat Washer, Screw for Base, Screwdriver for Base, Screwdriver for Grilles.]

3. Connecting to Your Pedestal Air Circulator

This device includes a radio transmitting module (CMIIT ID: FCC ID: 2A3SYMBL02).

Before connecting the appliance to your mobile device, please scan the QR code on the left or go to the app store and search "Dreo", then select and download the app.

[Diagram: A QR code for downloading the Dreo app.]

[App Store and Google Play logos.]

You can use the Dreo app to connect your smart pedestal air circulator to Amazon Alexa or Google Assistant. Please follow the in-app instructions to set up your voice assistant.

NOTE: You must create a Dreo account to access voice assistants.

1. Launch Dreo and sign in or create an account by following in-app instructions.
2. Enable Bluetooth on your mobile device and plug in your air circulator.
3. Tap "+ Add Device" and select the air circulator you want to link.
4. Hold the Oscillation button (?) for 5 seconds to start WiFi connection settings. (Tip: The WiFi icon (?) will keep flashing when pairing.)
5. Follow in-app instructions to complete WiFi connection.
6. You're now ready to control the appliance on your app. (Tip: To restart connection settings, hold the Oscillation button (?) again for 5 seconds.)

4. Knowing Your Pedestal Air Circulator

Control Panel

• Power Button (⏻): Turn power on/off. Long press for 10 seconds to reset to factory settings.
• Increase Speed Button (+): Increase airflow speed (1-8 levels). Exit Turbo Mode.
• Decrease Speed Button (-): Decrease airflow speed (1-8 levels). Exit Turbo Mode.
• Horizontal Oscillation (?): Sweep airflow horizontally (0°/60°/90°/120°). Long press for 5 seconds to start network settings and device pairing.
• Vertical Oscillation (?): Sweep airflow vertically (90°). Long press for 3 seconds to mute/unmute.

Note: This appliance is mute by default. To turn on button sounds, go to the Dreo app.

LED Display

The LED display shows the current operating status and mode. Icons include:

• Vertical Oscillation (90°)
• 60° Horizontal Oscillation
• 90° Horizontal Oscillation
• 120° Horizontal Oscillation
• Turbo Mode (?)
• Auto Mode (?)
• Air Circulator Speed / Timer Hour (⏱️)
• WiFi Connection (?)

[Diagram: Shows the LED display with icons for Vertical Oscillation, 60° Horizontal Oscillation, 90° Horizontal Oscillation, 120° Horizontal Oscillation, Turbo Mode, Auto Mode, Air Circulator Speed/Timer Hour, and WiFi Connection.]

5. Using Your Pedestal Air Circulator

General Operations

1. Press the Power button (⏻) to turn on the air circulator.
2. Press the Speed Increase (+) or Decrease (-) buttons to adjust the airflow speed.
3. Press the Oscillation button (?) to change the airflow direction.

Working Modes

(Press buttons on the remote control or select via the Dreo app)

• Normal Mode: Air circulator runs at the fixed speed.
• Auto Mode: Air circulator speed adapts to the ambient temperature.
• Turbo Mode (?): Air circulator runs at the maximum speed.
• Natural Mode: Air circulator runs at alternating speeds. (Available in the Dreo app)
• Custom Mode: Air circulator speed changes according to temperatures or time you desire. (Available in the Dreo app)
• Sleep Mode: Mute auto on. Air circulator speed decreases every 30 minutes. Speed decreases by two levels at most and will remain constant if at level 3, 2, or 1. (Example: For level 8, sequence is 8 -> 7 -> 6). (Available in the Dreo app)

Seasonal Usage Tips

• Summer: Use with Air Conditioner
  Position the air circulator in front of your AC to circulate cold air and provide better cooling. [Diagram: Shows air circulator in front of an AC unit, with arrows indicating cool air circulation.]
• Winter: Use with Heater
  Send the heat to the corner of the room and circulate warm air faster. [Diagram: Shows air circulator near a heater, with arrows indicating warm air circulation.]
• Spring & Fall: Circulation
  Make the indoors as fresh and pleasant as the outdoors. [Diagram: Shows air circulator in a room, with arrows indicating general air circulation.]

Additional Features

• Timer (⏱️): When the fan is ON/OFF, touch the timer button repeatedly to set a timer from 1 to 8 hours. When the timer ends, the fan will stop/start running automatically. To cancel, set the time to 0 hour. Note: When the auto-off timer is enabled, the display will return to fan speed after 3 seconds. Display will show '8' if the timer is beyond 8 hours. To set a timer beyond 8 hours, please go to the Dreo app.
• Child Lock (?): Long press the Horizontal Oscillation button (?) and Vertical Oscillation button (?) at the same time for 3 seconds to turn on/off Child Lock. Note: Child Lock doesn't apply to operations from the remote control and the Dreo app. You can also turn off Child Lock by re-plugging in, resetting to factory settings, or through the Dreo app.
• Memory (?): If the fan is turned OFF or disconnected from power, it will operate under the previous settings (except the Timer setting) when it is turned ON again.
• Firmware Update (⬆️): Check the firmware version on the Dreo app and update regularly for the air circulator to work more efficiently. Display will show "Updating..." during the update process. Do not operate until the update is completed.
• Display Auto Off (?): Display turns off after 1 minute (after 5 seconds in sleep mode). Wake up the display with any button. To disable this feature, please go to the Dreo app.

Remote Control

The remote control allows operation of the fan. It includes buttons for:

• Power Indicator
• Decrease Speed (-)
• Mode
• Horizontal Oscillation (?)
• Power (⏻)
• Increase Speed (+)
• Vertical Oscillation (?)
• Timer (⏱️)

[Diagram: Shows the remote control layout with labels for Power Indicator, Decrease Speed, Mode, Horizontal Oscillation, Power, Increase Speed, Vertical Oscillation, Timer.]

Battery Replacement

1. Press the locking button to pop out the battery holder. [Diagram: Shows pressing a button on the remote.]
2. Replace with the same battery type (CR2025 3V) with the (+) side facing up. [Diagram: Shows inserting a coin cell battery.]
3. Push in the holder until securely locked into place. [Diagram: Shows reinserting the battery holder.]

Note: If the indicator on the remote control doesn't turn on any more, please consider replacing the battery.

6. Cleaning and Maintenance

⚠️ WARNING: Chemical Burn Hazard. Keep batteries away from children.

This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the battery, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

The batteries must be disposed of properly, including keeping them away from children. Even used cells may cause injury.

Outer Surface

Gently wipe off the dust with a soft, dry cloth. [Diagram: Shows cleaning the outer surface with a cloth.]

Base

The base can be disassembled in the reverse order of assembly.

ℹ️ CAUTION:

• Always unplug the fan before any cleaning or maintenance to avoid the risk of fire, electric shock, or injury to persons.
• Do not immerse in water or get water inside the motor housing.
• Do not use any chemical agents when cleaning the fan.
• Store in a cool, dry place and cover it to protect from dust.

Grilles

⚠️ WARNING: To reduce the risk of electrical shock and injury to persons, turn off and unplug the appliance before any cleaning and maintenance.

Front & Rear Grilles:

1. Remove the screws on the front and rear grilles, rotate the grilles counterclockwise to take them off. [Diagram: Shows removing screws and rotating grilles.]
2. Remove the blade cap by rotating it as shown and take the blade assembly out of the shaft. [Diagram: Shows removing blade cap and blade assembly.]
3. Rinse cap, blades, and grilles under running water or with a clean, damp cloth.
4. Dry up all parts, and insert the blade assembly back into the shaft by aligning the D-shaped points on the center. [Diagram: Shows reinserting blade assembly.]
5. Align the point on the front grille with the right point on the casing, then rotate the grille clockwise and install the screw back in place. Repeat the steps for the rear grille. [Diagram: Shows reattaching front grille.]

7. Troubleshooting

My air circulator won't turn on!

Make sure that the cord is connected to a powered outlet and the mains voltage corresponds with the voltage indicated on the air circulator.

My air circulator is shaky and wobbling!

1. Place the air circulator on a flat, level surface.
2. Incorrect installation might also cause shakiness. Please refer to the assembly instructions in pages 3-4.

My air circulator is making vibration and noise!

1. Place the air circulator on a flat, level surface.
2. Be sure not to insert anything into the air inlet and outlet.

If your problem is not listed or still persists, please contact our Customer Support (see page 18).

8. Dreo Customer Care

Default 12-Month Warranty

This appliance is covered by Dreo warranty for 12 months from the date of its original purchase.

Extend Your Warranty

Extend your warranty by registering your new appliance on our website https://dreo.com/warranty.

Warranty Exclusions

The warranty will not apply in cases of:

1. Accident, misuse, or repairs performed by unauthorized personnel.
2. Any unit that has been tampered with or used for commercial purposes.
3. Normal wear and tear of wearable parts.
4. Use of force, damage caused by external influences.
5. Damage caused by non-observance of the User Manual, e.g., connection to an unsuitable mains supply or noncompliance with the instructions.
6. Partially or completely dismantled appliances.
7. Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the product or any of its parts that have been performed by a repair person not authorized by Dreo.

We can only provide after-sales service for products that are sold by Dreo or Dreo authorized retailers and distributors. If you have purchased the appliance from a different place, please contact your seller for return and warranty issues.

Contact Us:

? (888) 290-1688 | ✉️ support@dreo.com | ? www.dreo.com

Mon - Fri, 9:00 am-5:00 pm PST/PDT

FCC Statement

This device complies with Part 15 of the FCC Rules. This equipment has been tested and found to comply with the limits for a Consumer ISM equipment, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

Please note that changes or modifications of this product are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Manufacturer: Shenzhen Hesung Innovation Technology Co., LTD

Address: 26F, Bldg A7, Creative City, Shenzhen, China

Made in China

[ETL Listed Logo: ETL Certified by Intertek, Certificate Number 3189196]

Document Revision: Rev_1.2_EN