Dreo Air Circulator Fan User Manuals

Dreo Smart Pedestal Air Circulator Fan (DR-HAF003S)

Dreo Pedestal Fan with Remote, PolyFan 513S, 43'' Quiet Standing Fan for Home Bedroom, 120°+105° Smart Oscillating Floor Fans with Wi-Fi/Voice Control, Works with Alexa/Google, 6 Modes, 8 Speeds

Model: DR-HAF003S

Thank you for choosing Dreo! Your support means the world to us. We hope you enjoy our product as much as we did creating it.

Contact Dreo Customer Care:

1. IMPORTANT SAFETY INSTRUCTIONS

READ ALL CAUTIONARY MARKINGS ON THE APPLIANCE AND SAFETY INSTRUCTIONS IN THE USER MANUAL BEFORE USE.

• Do not cover the air inlet and outlet while in operation.
• Do not use the air circulator near flammables and combustibles.

General Safety

• Children shall not play with the appliance. Cleaning and maintenance shall not be performed by children without supervision.
• Use the appliance as described in the user manual only. Any other use not specified may cause injury.
• This appliance can be used by children aged above 8 years and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of this appliance in a safe way and understand the hazards involved.

Operation Safety

• Do not immerse in water and any other liquids.
• Do not use the appliance until the base is installed.
• Do not operate the unit close to the curtain. Do not hang foreign objects on the grille to prevent damaging the balance of the fan or rotational structure.
• Do not operate the fan under overly humid, high-temperature, dusty environment or the place where acid or alkali is stored.
• Fans should never blow directly on infants, the elderly, and patients for a long time.

Electricity Safety

• WARNING: Make sure that the voltage of your electricity supply is the same as that indicated on the appliance.
• Always unplug before cleaning or leaving the appliance unused for a long period of time. Keep your hands dry when plugging/unplugging.
• Do not operate any air circulator with a damaged cord or plug. Discard air circulator or return to an authorized service facility for examination and/or repair.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic areas where it will not be tripped over.
• WARNING: Do not use this air circulator with any solid-state speed control device.
• Use 24V/1.5A power adapter only. Turn off the appliance before plugging.
• WARNING: To reduce the risk of fire, electric shock or injury to persons, do not use replacement parts that have not been recommended by the manufacturer (e.g. parts made at home using a 3D printer).
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

FOR HOUSEHOLD USE ONLY READ AND SAVE THESE INSTRUCTIONS

Gentle Reminder: Check the appliance regularly and refer to TROUBLESHOOTING or contact our customer support if it shows any of the following signs:

• Power cord or plug is damaged.
• Loud noise, unusual smell or excessive heat.

Specifications

2. ASSEMBLING YOUR PEDESTAL AIR CIRCULATOR

Assembly Instructions

Follow the steps below to assemble your air circulator.

1. Push the air circulator into the base by aligning the cutout on the bottom of the air circulator with the jutting point in the middle of the base.
2. Thread the screw through the flat washer [flat-washer], insert into the base, and use the included screwdriver for base [screwdriver-for-base] to drive the screw into the bottom of the air circulator.
3. Put the air circulator upright, hold the main body while rotating the Adjustment Collar [adjustment-collar] counterclockwise to raise or lower the air circulator to the desired height. The adjustable range is 0-5.9 inches [height-adjustment-range].
4. Tighten the adjustment collar by rotating clockwise. Plug the power adapter [power-adapter] into the power input [power-input] (located at the back of the air circulator), and into the power outlet.

CAUTION: Do not operate the air circulator if the base has not been installed.

Package Contents

• Air Outlet [air-outlet]
• LED Display [LED-display]
• Air Inlet [air-inlet]
• Carry Handle [carry-handle]
• Power Input [power-input]
• Base [base]
• Adjustment Collar [adjustment-collar]
• User Manual [user-manual]
• Quick Start Guide [quick-start-guide]
• Remote Control (Battery Included) [remote-control] [battery-included]
• Power Adapter [power-adapter]
• Flat Washer [flat-washer]
• Screw for Base [screw-symbol]
• Screwdriver for Base [screwdriver-for-base]
• Screwdriver for Grilles [screwdriver-for-grilles]

3. CONNECTING TO YOUR PEDESTAL AIR CIRCULATOR

This device includes the radio transmitting module whose CMIIT ID is FCC ID: 2A3SYMBL02 [CMIIT-ID] [FCC-ID].

Before connecting the appliance to your mobile device, please scan the QR code on the left or go to the app store and search "Dreo", then select and download the app.

You can use the Dreo app to connect your smart pedestal air circulator to Amazon Alexa or Google Assistant. Please follow the in-app instructions to set up your voice assistant.

NOTE: You must create a Dreo account to access voice assistants.

1. Launch Dreo and sign in or create account by following in-app instructions.
2. Enable Bluetooth [bluetooth-icon] on your mobile device and plug in your air circulator.
3. Tap + Add Device [add-device-icon] and select the air circulator you want to link.
4. Hold the Oscillation button [horizontal-oscillation-symbol] for 5 seconds to start WiFi connection [wifi-flashing-icon]. (Tip: The WiFi icon will keep flashing when pairing.)
5. Follow in-app instructions to complete WiFi connection.
6. You're now ready to control the appliance on your app. (Tip: To restart connection settings, hold the Oscillation button again for 5 seconds.)

4. KNOWING YOUR PEDESTAL AIR CIRCULATOR

Control Panel

• Power Button [power-symbol]: Turn power on/off. Long press 10 seconds to reset to factory settings [factory-settings-icon].
• Increase Speed Button [speed-up-symbol]: Increase airflow speed (1-8 levels). Exit Turbo Mode [turbo-mode-symbol].
• Decrease Speed Button [speed-down-symbol]: Decrease airflow speed (1-8 levels). Exit Turbo Mode [turbo-mode-symbol].
• Horizontal Oscillation [horizontal-oscillation-symbol]: Sweep airflow horizontally (0°, 60°, 90°, 120°). Long press 5 seconds to start network settings and device pairing.
• Vertical Oscillation [vertical-oscillation-symbol]: Sweep airflow vertically (90°). Long press 3 seconds to mute/unmute [mute-unmute-icon]. Note: This appliance is mute by default. To turn on button sounds, go to the Dreo app.

LED Display Indicators

• Vertical Oscillation [vertical-oscillation-symbol]
• 60° Horizontal Oscillation [60-degree] [horizontal-oscillation-symbol]
• 90° Horizontal Oscillation [90-degree] [horizontal-oscillation-symbol]
• 120° Horizontal Oscillation [120-degree] [horizontal-oscillation-symbol]
• Air Circulator Speed / Timer Hour
• WiFi Connection [wifi-symbol]
• Turbo Mode [turbo-mode-symbol]
• Auto Mode [auto-mode-symbol]
• Timer [timer-icon]

5. USING YOUR PEDESTAL AIR CIRCULATOR

Getting the Most out of Your Air Circulator

• Summer: Use with Air Conditioner. Position the air circulator in front of your AC to circulate cold air and provide better cooling.
• Winter: Use with Heater. Send the heat to the corner of the room and circulate warm air faster.
• Spring & Fall: Circulation. Make the indoors as fresh and pleasant as the outdoors.

General Operations

1. Press [power-symbol] to turn on the air circulator.
2. Press [speed-up-symbol] or [speed-down-symbol] to adjust the airflow speed.
3. Press [horizontal-oscillation-symbol] or [vertical-oscillation-symbol] to change the airflow direction.

Working Modes

(Press [mode-button] on the remote)

• Normal Mode: Air circulator runs at the fixed speed [fixed-speed-icon].
• Custom Mode: (Available in the Dreo app) Air circulator speed changes according to temperatures or time you desire.
• Auto Mode [auto-mode-symbol]: Air circulator speed adapts to the ambient temperature [ambient-temperature-icon].
• Sleep Mode [sleep-mode-icon]: (Available in the Dreo app) Mute auto on. Air circulator speed decreases every 30 minutes. Speed decreases by two levels at most and will remain constant if at level 3, 2, or 1.
• Turbo Mode [turbo-mode-symbol]: Air circulator runs at the maximum speed [maximum-speed-icon].
• Circulation: Natural Mode [natural-mode-icon]. Make the indoors as fresh and pleasant as the outdoors.
• Natural Mode: (Available in the Dreo app) Air circulator runs at alternating speeds [alternating-speeds-icon].

Additional Features

• Timer: When the fan is ON/OFF, touch the timer button [timer-icon] repeatedly to set a timer from 1 to 8 hours [timer-1-8-hours]. When the timer ends, the fan will stop/start running automatically. To cancel, set the time to 0 hour. Note: When the auto off timer is enabled, display will return to fan speed after 3 seconds. Display will show "8" if the timer is beyond 8 hours [timer-beyond-8-hours]. To set a timer beyond 8 hours, please go to the Dreo app.
• Child Lock [child-lock-icon]: Long press the Horizontal Oscillation button [horizontal-oscillation-symbol] and Vertical Oscillation button [vertical-oscillation-symbol] at the same time for 3 seconds to turn on/off Child Lock. Note: Child Lock doesn't apply to operations from the remote control and the Dreo app. You can also turn off Child Lock by re-plugging in, resetting to factory settings [factory-settings-icon], or through the Dreo app.
• Memory: If the fan is turned OFF or disconnected from power, it will operate under the previous settings (except the Timer setting) when it is turned ON again.
• Firmware Update [firmware-update-icon]: Check the firmware version on the Dreo app and update regularly for the air circulator to work more efficiently. Display will show "[update-process-icon]" during the update process. Do not operate until the update is completed.
• Display Auto Off: Display turns off after 1 minute (after 5 seconds in sleep mode). Wake up the display with any button. To disable this feature, please go to the Dreo app.

Remote Control

• Power Indicator [remote-power-indicator]
• Decrease Speed [remote-decrease-speed]
• Mode [remote-mode]
• Horizontal Oscillation [remote-horizontal-oscillation]
• Power [power-symbol]
• Increase Speed [remote-increase-speed]
• Vertical Oscillation [remote-vertical-oscillation]
• Timer [remote-timer]

Battery Replacement

1. Press the locking button [locking-button] to pop out the battery holder [battery-holder].
2. Replace with the same battery type (CR2025 3V [battery-type-voltage]) with the (+) side facing up [plus-side-up].
3. Push in the holder [push-in-holder] until securely locked into place [securely-locked].

Note: If the indicator on the remote control [remote-indicator] doesn't turn on any more, please consider replacing the battery [replace-battery].

WARNING: Chemical Burn Hazard [chemical-burn-hazard]. Keep batteries away from children. This product contains a lithium button/coin cell battery [lithium-button-coin-cell-battery]. If a new or used lithium button/coin cell battery is swallowed or enters the body [swallowed-or-enters-body], it can cause severe internal burns [severe-internal-burns] and can lead to death [lead-to-death] in as little as 2 hours [2-hours]. Always completely secure the battery compartment [completely-secure]. If the battery compartment does not close securely, stop using the product [stop-using], remove the battery [remove-battery] and keep it away from children [keep-away]. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention [seek-immediate-medical-attention]. The batteries must be disposed of properly [disposed-of-properly], including keeping them away from children. Even used cells may cause injury [used-cells-may-cause-injury].

6. CLEANING AND MAINTENANCE

Outer Surface [outer-surface]

Gently wipe off the dust with a soft, dry cloth [soft-dry-cloth].

Base [base]

The base can be disassembled in the reverse order of assembly [reverse-order-assembly].

CAUTION:

• Always unplug the fan [unplug-fan] before any cleaning or maintenance to avoid the risk of fire, electric shock, or injury to persons [risk-of-fire-shock-injury].
• Do not immerse in water [do-not-immerse] or get water inside the motor housing [motor-housing].
• Do not use any chemical agents [chemical-agents] when cleaning the fan.
• Store in a cool, dry place [cool-dry-place] and cover it to protect from dust [protect-from-dust].

Grilles [grilles]

WARNING: To reduce the risk of electrical shock and injury to persons [reduce-risk-electrical-shock-injury], turn off and unplug the appliance [turn-off-unplug] before any cleaning and maintenance.

1. Remove the screws [remove-screws] on the front grille [front-grille] and rear grille [rear-grille], rotate the grilles counterclockwise [rotate-counterclockwise] to take them off [take-off].
2. Remove the blade cap [blade-cap] by rotating it as shown and take the blade assembly [blade-assembly] out of the shaft [shaft].
3. Rinse cap, blades, and grilles [rinse-cap-blades-grilles] under running water [running-water] or with a clean, damp cloth [clean-damp-cloth].
4. Dry up all parts [dry-up-parts], and insert the blade assembly [blade-assembly] back into the shaft [shaft] by aligning the D-shaped points [align-D-shaped-points] on the center [center].
5. Align the point on the front grille [align-front-grille-point] with the right point on the casing [right-point-casing], then rotate the grille clockwise [rotate-clockwise] and install the screw back in place [install-screw]. Repeat the steps [repeat-steps] for the rear grille.

7. TROUBLESHOOTING

• My air circulator won't turn on! [air-circulator-wont-turn-on] Make sure that the cord is connected to a powered outlet [cord-connected-powered-outlet] and the mains voltage corresponds [mains-voltage-corresponds] with the voltage indicated on the air circulator.
• My air circulator is shaky and wobbling! [shaky-wobbling] 1. Place the air circulator on a flat, level surface [flat-level-surface]. 2. Incorrect installation [incorrect-installation] might also cause shakiness. Please refer to the assembly instructions [assembly-instructions] on pages 3-4.
• My air circulator is making vibration and noise! [vibration-noise] 1. Place the air circulator on a flat, level surface [flat-level-surface]. 2. Be sure not to insert anything into the air inlet and outlet [no-insertion-inlet-outlet]. 3. It is normal that the fan makes a little noise when manually adjusting the fan head [manually-adjusting-head].

If your problem is not listed [problem-not-listed] or still persists [problem-persists], please contact our Customer Support [contact-customer-support] (see page 18).

8. DREO CUSTOMER CARE

• Default 12-Month Warranty [default-12-month-warranty]: This appliance is covered by Dreo warranty for 12 months from the date of its original purchase [date-original-purchase].
• Extend Your Warranty [extend-warranty]: Extend your warranty by registering your new appliance on our website [our-website] https://dreo.com/warranty.
• The warranty will not apply in cases of: 1. Accident, misuse, or repairs performed by unauthorized personnel [accident-misuse] [unauthorized-repairs]. 2. Any unit that has been tampered with [tampered-with] or used for commercial purposes [commercial-purposes]. 3. Normal wear and tear [normal-wear-tear] of wearable parts [wearable-parts]. 4. Damage caused by non-observance of the User Manual [non-observance-manual], e.g. connection to an unsuitable mains supply [unsuitable-mains-supply] or noncompliance with the instructions [noncompliance-instructions]. 5. Partially or completely dismantled appliances [dismantled-appliances]. 6. Defects caused by or resulting from damages from shipping [shipping-damage] or from repairs, service, or alteration to the product or any of its parts that have been performed by a repair person not authorized by Dreo [repairs-service-alteration] [unauthorized-repair-person].
• We can only provide after-sales service [after-sales-service] for products that are sold by Dreo or Dreo authorized retailers and distributors [sold-by-dreo] [authorized-retailers-distributors]. If you have purchased the appliance from a different place [purchased-elsewhere], please contact your seller [contact-seller] for return and warranty issues [return-warranty-issues].

Contact Information:

FCC Statement [FCC-statement]

This device complies with Part 15 of the FCC Rules [FCC-rules-part-15]. This equipment has been tested and found to comply with the limits for a Consumer ISM equipment [consumer-ISM-equipment], pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference [harmful-interference] in a residential installation [residential-installation]. This equipment generates, uses and can radiate radio frequency energy [radio-frequency-energy] and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications [radio-communications]. However, there is no guarantee that interference will not occur in a particular installation [not-guaranteed] [particular-installation].

If this equipment does cause harmful interference to radio or television reception [television-reception], which can be determined by turning the equipment off and on [determined-by-power-cycle], the user is encouraged to try to correct the interference by one or more of the following measures:

• - Reorient or relocate the receiving antenna [reorient-relocate] [receiving-antenna].
• - Increase the separation between the equipment and receiver [increase-separation] [equipment-receiver].
• - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected [connect-outlet] [different-circuit].
• - Consult the dealer or an experienced radio/TV technician for help [consult-dealer] [radio-tv-technician].

Note: Modifications not expressly approved by the party responsible for compliance [approved-by-compliance-party] could void the user's authority to operate the equipment [void-user-authority] [operate-equipment].

Rev_1.2_EN [revision-number]

Manufacturer: Shenzhen Hesung Innovation Technology Co., LTD [manufacturer-name] [manufacturer-address]. MADE IN CHINA [made-in-china].

Certification: Intertek [certification-body] 3189196 [certification-mark].

Dreo Desk Air Circulator Fan (DR-HAF002)

Dreo Fans for Home Bedroom, Table Air Circulator Fan for Whole Room, 9 Inch, 70ft Strong Airflow, 120° adjustable tilt, 28db Low Noise, Quiet, 3 Speeds, 2023 New Desk Fan for Office, Kitchen, Home

Model: DR-HAF002

Thank you for choosing Dreo! Your support means the world to us. We hope you enjoy our product as much as we did creating it.

Contact Dreo Customer Care:

1. IMPORTANT SAFETY INSTRUCTIONS

READ ALL CAUTIONARY MARKINGS ON THE APPLIANCE AND SAFETY INSTRUCTIONS IN THE USER MANUAL BEFORE USE.

• Do not cover the air inlet and outlet while in operation.
• Do not use the air circulator near flammables and combustibles.

General Safety

• Children shall not play with the appliance. Cleaning and maintenance shall not be performed by children without supervision.
• Use the appliance as described in the user manual only. Any other use not specified may cause injury.
• This appliance can be used by children aged above 8 years and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of this appliance in a safe way and understand the hazards involved.

Operation Safety

• Do not immerse in water and any other liquids.
• Do not use the appliance until the base is installed.
• Do not operate the unit close to the curtain. Do not hang foreign objects on the grille to prevent damaging the balance of the fan or rotational structure.
• Do not operate the fan under overly humid, high-temperature, dusty environment or the place where acid or alkali is stored.
• Fans should never blow directly on infants, the elderly, and patients for a long time.

Electricity Safety

• WARNING: Make sure that the voltage of your electricity supply is the same as that indicated on the appliance.
• Always unplug before cleaning or leaving the appliance unused for a long period of time. Keep your hands dry when plugging/unplugging.
• Do not operate any air circulator with a damaged cord or plug. Discard air circulator or return to an authorized service facility for examination and/or repair.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic areas where it will not be tripped over.
• WARNING: Do not use this air circulator with any solid-state speed control device.
• This appliance employs overload protection (fuse) [fuse-symbol]. A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions and check the appliance. If the replacement fuse blows, a short-circuit may be present and the appliance should be discarded or returned to an authorized service facility for examination and/or repair.
• This appliance has a polarized plug (one blade is wider than the other) [plug-symbol]. To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
• WARNING: To reduce the risk of fire, electric shock or injury to persons, do not use replacement parts that have not been recommended by the manufacturer (e.g. Parts made at home using a 3D printer).

FOR HOUSEHOLD USE ONLY READ AND SAVE THESE INSTRUCTIONS

Gentle Reminder: Check the appliance regularly and refer to TROUBLESHOOTING or contact our customer support if it shows any of the following signs:

• Power cord or plug is damaged.
• Loud noise, unusual smell or excessive heat.

Specifications

2. KNOWING YOUR AIR CIRCULATOR FAN

Package Contents

• Air Outlet [air-outlet]
• Control Knob [control-knob]
• Air Inlet [air-inlet]
• Base [base]
• User Manual [user-manual]
• Plastic Anchors X 2 [plastic-anchors]
• Screws X 2 [screw-symbol]

3. USING YOUR AIR CIRCULATOR FAN

Getting the Most out of Your Air Circulator Fan

• Summer: Use with Air Conditioner. Position the air circulator in front of your AC to circulate cold air and provide better cooling.
• Winter: Use with Heater. Send the heat to the corner of the room and circulate warm air faster.
• Spring & Fall: Circulation. Make the indoors as fresh and pleasant as the outdoors.

Wall Mounting Your Fan (Optional)

1. Find a brick or concrete wall and mark the position where the fan will be mounted.
2. Make sure there is a 124mm / 4.88inch [124mm-4.88inch] distance between the two holes [wall-mount-screws].
3. Screw the plastic anchors [plastic-anchors] onto the wall with a drill [drill-symbol]. Leave 1/3 inch [one-third-inch] of the screws exposed [exposed-screw-part].
4. Line up the holes on the base of the fan with the screws on the wall and hang the fan.

General Operations

• Plug in and twist the control knob [control-knob] clockwise to adjust the fan speed to High, Medium, and Low.
• Tilt the fan head by hand to the desired angle (0°, -30°, 30°, 60°, 90°).

4. CLEANING AND MAINTENANCE

Outer Surface [outer-surface]

Gently wipe off the dust with a soft, dry cloth [soft-dry-cloth].

CAUTION:

• Always unplug the air circulator [unplug-fan] before any cleaning or maintenance to avoid the risk of fire, electric shock, or injury to persons [risk-of-fire-shock-injury].
• Do not immerse in water [do-not-immerse] or get water inside the motor housing [motor-housing].
• Do not use any chemical agents [chemical-agents] when cleaning the fan.
• Store in a cool, dry place [cool-dry-place] and cover it to protect from dust [protect-from-dust].

Front Grille and Blades [front-grille] [blades]

WARNING: To reduce the risk of electrical shock and injury to persons [reduce-risk-electrical-shock-injury], turn off and unplug the appliance [turn-off-unplug] before any cleaning and maintenance.

1. Remove the screw [screw-symbol] on the front grille [front-grille], rotate the grille counterclockwise [rotate-counterclockwise] to take it off [take-off].
2. Remove the blade cap [blade-cap] by rotating it as shown and take the blade assembly [blade-assembly] out of the shaft [shaft].
3. Rinse cap, blades, and grille [rinse-cap-blades-grilles] under running water [running-water] or with a clean, damp cloth [clean-damp-cloth].
4. Dry up all parts [dry-up-parts], and insert the blade assembly [blade-assembly] back into the shaft [shaft] by aligning the D-shaped points [align-D-shaped-points] on the center [center].
5. Align the point on the front grille [align-front-grille-point] with the right point on the casing [right-point-casing], then rotate the grille clockwise [rotate-clockwise] and install the screw back in place [install-screw].

User Servicing Instructions (Fuse) [fuse-symbol]

This appliance features a fused safety plug that protects against overload or short-circuit situations. If the fuse blows, please cut off power and follow the instructions below:

1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
2. Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades.
3. Remove fuse carefully. Push the fuse from the other side to remove the fuse.
4. Replace with same type fuse (e.g., 5A, 125V).
5. Close fuse cover. Slide closed the fuse access cover on top of attachment plug.

WARNING: The fuse is a safety device [fuse-symbol] that should not be removed. Discard product if the attachment plug is damaged.

5. TROUBLESHOOTING

• My air circulator won't turn on! [air-circulator-wont-turn-on] Make sure that the cord is connected to a powered outlet [cord-connected-powered-outlet] and the mains voltage corresponds [mains-voltage-corresponds] with the voltage indicated on the air circulator.
• My air circulator is shaky and wobbling! [shaky-wobbling] Place the air circulator on a flat, level surface [flat-level-surface].
• My air circulator is making vibration and noise! [vibration-noise] 1. Place the air circulator on a flat, level surface [flat-level-surface]. 2. Be sure not to insert anything into the air inlet and outlet [no-insertion-inlet-outlet]. 3. It is normal that the fan makes a little noise when manually adjusting the fan head [manually-adjusting-head].

If your problem is not listed [problem-not-listed] or still persists [problem-persists], please contact our Customer Support [contact-customer-support] (see page 12).

6. DREO CUSTOMER CARE

• Default 12-Month Warranty [default-12-month-warranty]: This appliance is covered by Dreo warranty for 12 months from the date of its original purchase [date-original-purchase].
• Extend Your Warranty [extend-warranty]: Extend your warranty by registering your new appliance on our website [our-website] https://dreo.com/warranty.
• The warranty will not apply in cases of: 1. Accident, misuse, or repairs performed by unauthorized personnel [accident-misuse] [unauthorized-repairs]. 2. Any unit that has been tampered with [tampered-with] or used for commercial purposes [commercial-purposes]. 3. Normal wear and tear [normal-wear-tear] of wearable parts [wearable-parts]. 4. Damage caused by non-observance of the User Manual [non-observance-manual], e.g. connection to an unsuitable mains supply [unsuitable-mains-supply] or noncompliance with the instructions [noncompliance-instructions]. 5. Partially or completely dismantled appliances [dismantled-appliances]. 6. Defects caused by or resulting from damages from shipping [shipping-damage] or from repairs, service, or alteration to the product or any of its parts that have been performed by a repair person not authorized by Dreo [repairs-service-alteration] [unauthorized-repair-person].
• We can only provide after-sales service [after-sales-service] for products that are sold by Dreo or Dreo authorized retailers and distributors [sold-by-dreo] [authorized-retailers-distributors]. If you have purchased the appliance from a different place [purchased-elsewhere], please contact your seller [contact-seller] for return and warranty issues [return-warranty-issues].

Contact Information:

Rev_1.2_EN [revision-number]

Manufacturer: Shenzhen Hesung Innovation Technology Co., LTD [manufacturer-name] [manufacturer-address]. MADE IN CHINA [made-in-china].

Certification: Intertek [certification-body] 5018396 [certification-mark].