RECHARGEABLE BLUETOOTH OPTICAL MOUSE FOR THREE DEVICES

USER GUIDE

Thank you for purchasing the Macally Bluetooth mouse. The mouse is a rechargeable Bluetooth wireless optical mouse with a 800/1200/1600 DPI switch button, two soft-click buttons and scroll wheel/button for a precise and smooth control. The ergonomic and ambidextrous design offers maximum comfort to both left-handed and right-handed users and helps to increase productivity. The 280mAh built-in rechargeable battery will power the mouse for up to 2 months before next charging is required.* No need to buy and replace batteries anymore! The Macally Bluetooth mouse works with Mac, PC, iOS/iPadOS and Android, and doesn't require any driver.

About this guide

Before you start using the Macally Bluetooth mouse, be sure to read this guide in its entirety.

Safety instructions

Please read the following carefully before using this product. Incorrect use of this product may result in reduced performance, permanent damage and void warranty:

1. Do not place this product near a heat source.
2. Operating temperature of 0°C to 40°C. Storage temperature of -20°C to 65°C.
3. Do not place this product near moisture nor liquids.
4. Operate and store at humidity of 20% to 80% (non-condensing)
5. Do not place heavy objects on this product.
6. Do not drop this product.
7. Do not dispose this product in the garbage. Take it to your local recycling centre.

Package contents

• Bluetooth mouse
• User guide

Hardware basics

The mouse features a charging port, an ON/OFF switch, and a push button used for channel switching and Bluetooth pairing. It includes channel status LEDs, left and right buttons, and a scroll wheel/button. The optical sensor, with DPI settings of 800, 1200, or 1600, is located on the underside. A battery charging indicator LED, situated under the scroll wheel, displays a solid red light when charging and turns off when the battery is fully charged. Connection is made via a charging cable to a USB charger or computer USB port. Channel status LED indications: a quick flash signifies pairing mode; a slow flash means it's waiting to connect to a previously paired device; when the LED is off, it indicates normal operation or a timeout in searching/connecting. To switch between channels, briefly press the BT button when all 3 LEDs are off.

Installation instructions

The Macally Bluetooth mouse requires a computer or mobile device with Bluetooth host capabilities. Once connected, you can set up and use one device on a single channel, or utilize all three channels for multiple devices. Switching between paired devices is quick and easy by simply pressing the push button on the mouse.

Bluetooth-pairing the mouse with Mac

1. To connect the mouse to your Mac computer via Bluetooth, place it within 1 ft/25 cm range.
2. Turn on the mouse and briefly press the push button to select an unused channel (B1, B2, or B3). The corresponding LED will flash quickly, indicating pairing mode.
3. On your Mac, click the Bluetooth icon, then select Bluetooth Settings. Ensure Bluetooth is enabled and searching for nearby devices.
4. "Macally Bluetooth x3 Mouse" should appear in the list. Select it and click "Connect".
5. Once paired with your Mac, the mouse is ready for use.

Bluetooth-pairing the mouse with Windows PC

1. To connect the mouse to your computer via Bluetooth, place it within 1 ft/25 cm range.
2. On your Windows PC, go to 'Devices and Printers' and select 'Bluetooth Devices'. Ensure Bluetooth is turned On.
3. Turn on the mouse and briefly press the push button to select an unused channel (B1, B2, or B3). The corresponding LED will flash quickly, indicating pairing mode.
4. Click 'Add a device' in the top left corner.
5. "Macally Bluetooth x3 Mouse" should appear. Select it and press 'Next'.

Bluetooth-pairing the mouse with iPad and iPhone

1. To connect the Bluetooth mouse to your iPad or iPhone, bring them within 1 ft range.
2. Turn on the mouse and briefly press the push button to select an unused channel (B1, B2, or B3). The corresponding LED will flash quickly, indicating pairing mode.
3. On your iPad or iPhone, navigate to Settings, select Accessibility, tap Touch, and enable AssistiveTouch. Within the AssistiveTouch menu, tap Devices, then Pointer Devices, and finally Bluetooth Devices. This will initiate a search for a new Bluetooth mouse.
4. When the Bluetooth mouse is discovered, select it from the list. Your iPad or iPhone will prompt for pairing; tap "Pair" in the upper right corner.
5. Once the Bluetooth mouse appears as "Connected", it is ready for use. A circular pointer cursor will be visible on your screen, allowing you to move, click, and scroll as you would with a regular mouse.

Bluetooth-pairing the mouse with Android device

1. To connect the mouse to your Android device, bring them within 1 ft range.
2. Turn on the mouse and briefly press the push button to select an unused channel (B1, B2, or B3). The corresponding LED will flash quickly, indicating pairing mode.
3. On your Android device, go to Settings, select Connected devices, and ensure Bluetooth is on. Tap to open Bluetooth, then tap Pair new devices, and select the discovered Bluetooth mouse to pair.
4. Once the Bluetooth mouse appears as "Connected" in the list, it is ready for use.

The standard button functions are as follows:

• Left button: Functions as a standard left click, supporting single and double clicks.
• Right button: Functions as a standard right click or menu button.
• Scroll wheel: Provides medium scroll speed.
• DPI button: Press to change the sensor resolution (800/1200/1600 DPI) and adjust tracking speed and precision to your preference.

Important notes

• The Macally Bluetooth Mouse enters sleep mode after 2 hours of inactivity. To wake it up and reconnect, simply click any button on the mouse.
• Battery life may vary depending on user and computing conditions.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Technical support

In USA, please call +1 909 230 6888 or email to techsupport@macally.com. Technical support hours in USA, Canada, and South America are from 8:30 AM to 5:30 PM (PT), Monday to Friday.

Warranty

Macally warrants that this product will be free from defects in title, materials, and manufacturing workmanship for one year in North America from the date of purchase. If the product is found to be defective, then, as your sole remedy and as the manufacturer's only obligation, Macally will repair or replace the product. This warranty is exclusive and is limited to the Macally mouse. This warranty shall not apply to products subjected to abuse, abnormal electrical or environmental conditions, or any condition other than normal use. The liability of Macally arising from this warranty and sale shall be limited to a refund of the purchase price. In no event shall Macally be liable for costs of procurement of substitute products or services, or for any lost profits, or for any consequential, incidental, direct, or indirect damages, however caused and on any theory of liability, arising from this warranty and sale. These limitations shall apply notwithstanding any failure of essential purpose of any limited remedy.