COMICA VM30 2.4G Super Cardioid Condenser Wireless Shotgun Microphone User Manual

Foreword

Thanks for purchasing COMICA VM30 2.4G Super Cardioid Condenser Wireless Shotgun Microphone.

Main Features

• Groundbreaking Shotgun Microphone with Integrated Wireless Module
• Support Wired/Wireless Dual Modes for One-button Switch
• 48kHz/24bit Super Cardioid Recording, Broadcasting-level Sound Quality
• Digital/Analog Output, Universal for Camera, Smartphone, Computer
• Intelligent Auto-sensing 3.5mm Output and Power Switch
• 75/150Hz Two Low-cut Filter Modes, High-frequency Boost
• Support Gain Control, Safety Mode, Real-time Monitor and Muting
• OLED Screen for Monitoring and Visual Operation
• Built-in Rechargeable Lithium Battery, Support Charging While Using
• Battery Life Up to 50H in Wired Mode, Up to 7H in Wireless Mode
• Low Latency<20ms, Wireless Working Range Up to 100m (Open Area)
• Full Metal Material, Super-shielding, Stable and Durable

Notice

Important Safety and Usage Guidelines:

• When it needs to be used for a long time, it can be connected to the external power to realize charging while using. AC/DC power is not supported to avoid noise problem.
• ?? Do not block the antenna position to avoid any poor signal generated.
• In wireless mode, for a better recording effect, please adjust the gain of the transmitter first. After the transmitter is adjusted to the maximum gain level, then adjust the gain of the receiver accordingly.
• This product belongs to high-precision instruments; please avoid falling, collision, or pounding.
• Do not use this equipment in the vicinity of heat sources or interference sources, such as radiators, ovens, refrigerators, or air conditioners.
• If the pick-up distance is close or when used outdoors, please put on the windmuff to prevent sound burst or reduce wind noise.
• Do not use the equipment in rain or in a damp environment to avoid short-circuit danger.
• ?‍?‍? Please keep face to face when using it, and don't turn your back to the receiver, otherwise, it is easy to generate breakpoints.

Packing List

Main Parts:

• Shotgun Microphone (Transmitter)
• Receiver

Accessories:

• 2 in 1 Charging & Output Cable
• 3.5mm TRS-TRS Audio Output Cable
• 3.5mm TRRS-TRRS Audio Output Cable
• Microphone Clip
• Shock Mount
• Windscreen
• Windmuff
• Pin
• Carry Case
• User Manual
• Warranty Card

Microphone (Transmitter) Components and Instruction

Illustration of the COMICA VM30 transmitter with numbered components:

1. Mic Capsule
2. Low Cut Indicator: Corresponding indicator lights up blue when turned on.
3. High-frequency Boost Indicator: Blue light on when turned on.
4. Modes Switch Button: Short press to switch between 75/150Hz low-cut and high-frequency boost functions; Long press to turn on Safety Mode (Safety Mode is only available in wired mode).
5. Working Indicator: Green light on in wired mode; In wireless mode, blue light flashes when pairing, and blue light on when paired.
6. RF Button: In wireless mode, long press to turn on/off microphone; in wired mode, long press to turn on/off wireless mode.
7. Gain Control Knob: Rotate to adjust microphone gain.
8. Pairing Hole: When the wireless connection is abnormal, use the pin to short-press the pairing hole to re-pair.
9. 3.5mm Output Port: Supports TRS and TRRS output.
10. USB-C Charging/Output Port: Plug in the 2 in 1 charging&output cable to charge or output digital audio.

Transmitter Screen Display Instruction

The transmitter screen displays various modes and statuses:

• Wireless Mode Off: ??
• Pairing...: ??
• Paired: ?✅
• Safety Mode: ?️ (Indicated by 'Sft' on screen)
• Normal Mode: ✅ (Indicated by 'Nor' on screen)
• Battery Power: ? (Displayed as bars)
• Audio Dynamic Bar: ? (Represents audio levels)
• Tracks: Normal Track (N), Safety Track (S)

Receiver Components and Instruction

Illustration of the COMICA VM30 receiver with numbered components:

1. 3.5mm Monitoring Port: Plug in 3.5mm TRS/TRRS headphones for monitoring.
2. 3.5mm TRS Audio Output Port: Connect to camera/smartphone/computer via 3.5mm audio cable.
3. USB-C Charging Port: Charging with the 2 in 1 charging&output cable.
4. Reset Hole: If there is an abnormal phenomenon such as the device is crash or unable to turn on, insert the reset pin into the reset hole to reset it.
5. Power/Mute Button: Long press to power on/off; Short press to turn on/off the mute function.
6. Gain Control/Screen Flip Button: Short press to adjust the gain; Long press to flip the screen.
7. Belt Clip

Receiver Screen Display Instruction

The receiver screen displays various statuses:

• Unpaired: ?❌
• Paired: ?✅
• Muting: ??
• Normal Working: ?✅
• Output Gain Level: ? (e.g., +12dB)
• Battery Power: ? (Displayed as bars)
• Audio Dynamic Bar: ? (Represents audio levels)

Installation and Usage: Wired Mode

3.5mm Analog Output

Connect the shotgun microphone to the camera/smartphone/computer through the 3.5mm audio cable, or connect to the camcorder/recorder through the 3.5mm TRS-XLR audio cable.

Connection Notes:

• TRRS-TRRS audio cable is for cameras/smartphones/computers. TRS-TRS audio cable is for some cameras not compatible with TRRS-TRRS. TRS-XLR audio cable is for recorders/camcorders (purchase separately).
• For devices with an XLR interface, the VM30 cannot automatically switch on/off. Users need to long press the RF button to turn on/off the microphone manually.

Installation and Usage: USB Digital Output

Connect the shotgun microphone to the smartphone or computer through the 2 in 1 charging&output cable and related OTG audio adapter cable.

Connection Notes:

• It is recommended to insert the USB end with the magnetic ring into the microphone and connect the other end to the smartphone/computer.
• When using with Lightning interface devices, please purchase a USB-Lightning adapter/cable that supports the OTG function.

Wireless Mode: Connection

Paired (Default)

The transmitter and receiver are paired by default at the factory. Turn on the receiver and switch the transmitter into wireless mode by long pressing its RF button; they will automatically connect.

Wireless Mode: Re-pairing

Re-pairing is required when the connection fails. Please follow the method below:

1. Keep the transmitter and receiver within 1m range (↔️ 1m). Turn on the receiver and long press the transmitter's RF button to turn it on and enter wireless mode.
2. Use the equipped pin to short-press the transmitter's pairing hole to make it enter the wireless pairing state. The indicator light flashes blue (?✨).
3. During pairing, the wireless icon on the screen turns into a paired icon (?✅). After successful pairing, the transmitter's indicator light stays solid blue (?).

Usage: Transmitter Mounting

The transmitter can be used with arm stands, boom poles, and tripods.

Usage: Receiver Connection

Connect the receiver to the camera/smartphone/computer through the 3.5mm audio cable for monitoring as needed.

Note: When using the receiver with mobile phones and laptops in wireless mode, please prepare a 3.5mm TRS-TRRS audio cable separately.

Specifications

Contact Information

Website: comica-audio.com

Facebook: Comica Audio Tech Global

Instagram: Comica Audio

YouTube: Comica Audio

Email: support@comica-audio.com

Phone: 400-8303-981

The COMICA LOGO is a trademark registered and owned by Commlite Technology Co., Ltd.