SMART HJC 11B

Downloadable Software

Download the SMART HJC BT App on Google Play Store or App Store.

Download the following items at www.smarthjc.com:

• SMART HJC BT App: Device Configuration Setting
• SMART HJC Device Manager: Firmware upgrade, Device configuration setting
• Quick Start Guide, User's Guide

Product Details

Bluetooth Module Components:

• Smart Hub: Provides a convenient and secure location for the Bluetooth module.
• Bluetooth Connector: Provides a convenient connection for the Bluetooth module.
• Speaker (L): Provides the left speaker.
• Speaker (R): Provides the right speaker.
• Status LED: Indicates the device status.
• TAP Button: Used for various operations.
• Button Module: Houses the control buttons.
• DC Power Charging & Firmware Upgrade Port: USB port for charging and firmware updates.
• Pinhole Fault Reset Button: Small button for resetting the device.
• Microphone connector: Connects the microphone to the module.
• (+) Button: Increases volume or navigates forward.
• (-) Button: Decreases volume or navigates backward.

Installation

SMART HJC 11B compatible HJC helmets can be found at www.smarthjc.com.

For detailed installation instructions, refer to the User's Guide.

Step 1: Modular Chin Bar / Open & Full Face Visor Opening

Open the modular chin bar or the visor opening on open/full-face helmets.

Step 2: Helmet Module Cover Removing

Carefully remove the helmet's module cover.

Step 3: Helmet's Cheek Pad Take Off

Remove the helmet's cheek pads to access the interior.

Step 4: Button Module Installation

Install the button module into the designated slot on the helmet.

Step 5: Bluetooth Module Installation

Connect the wires and install the Bluetooth module into its housing.

Step 6: Microphone Installation

• 6.1 Modular or Open Face Microphone Installation: Route the microphone cable and connect it.
• 6.2 Full Face Microphone Installation: Attach the microphone to the chin bar area and route the cable.

Step 7: Speaker Module Installation

Install the speakers into the helmet's ear pockets.

Step 8: Wire Arrangement

Neatly arrange all internal wiring to prevent pinching or damage.

Step 9: Cheek Pad Fasten Up

Reinstall the cheek pads.

Step 10: Modular Chin Bar / Open & Full Face Visor Closing

Close the modular chin bar or the helmet visor.

Icon Legend

• Tap: Tap the specified button the specified number of times.
• Press and Hold: Press and hold the button for the specified amount of time.

Basic Operations

• Powering On: Press and hold the TAP button for 1 second.
• Powering Off: Press and hold the TAP button for 1 second.
• Volume Up: Tap the (+) button.
• Volume Down: Tap the (-) button.

Checking the Battery Level

Tap the TAP button once to check the battery level. The LED indicator will show the remaining battery life.

Phone Pairing

1. Ensure Bluetooth is enabled on your mobile phone.
2. The headset enters Phone Pairing mode automatically upon initial power-on (blinking blue and red LEDs).
3. If not in pairing mode, hold the TAP button for 10 seconds to enter the configuration menu, then tap the (+) button once to select 'Phone pairing'.
4. Select SMART HJC 11B in the list of Bluetooth devices detected on your phone.

Using the Phone

• Answer a Call: Tap the TAP button once.
• Reject a Call: Press and hold the TAP button for 2 seconds.
• Voice Dial: Press and hold the TAP button for 3 seconds.

Music Control

• Play/Pause music: Press and hold the TAP button for 1 second.
• Track Forward: Press and hold the (+) button for 1 second.
• Track Backward: Press and hold the (-) button for 1 second.

Bluetooth Intercom

Up to three other people can be paired with the headset for Bluetooth intercom conversations.

Intercom Pairing

There are two methods for intercom pairing:

Using the Smart Intercom Pairing (SIP)

SIP allows quick pairing by scanning a QR code via the SMART HJC BT App.

1. Pair your mobile phone with the headset.
2. Open the SMART HJC BT App and navigate to the Smart Intercom Pairing menu.
3. Scan the QR code displayed on your friend's mobile phone (your friend can display their QR code by tapping ⏯️ > QR code in their SMART HJC BT App).
4. Tap 'Save' to confirm the pairing.
5. Repeat steps 3-4 to pair with additional intercom friends.

Note: SIP is not compatible with SMART HJC headsets using Bluetooth 3.0 or older.

Using the Button

1. Each user simultaneously presses and holds the TAP Button for 5 seconds until the voice prompt "Intercom Pairing" is heard.
2. Tap the TAP Button on either headset to establish the pairing. The LED will turn blue.
3. Repeat steps 1-2 to pair with additional headsets.

Last-Come, First-Served

When multiple intercom connections are active, the most recently paired headset becomes the 'First Intercom Friend'.

Two-way Intercom

• Start/End Conversation with the First Intercom Friend: Tap the TAP Button once.
• Start/End Conversation with the Second Intercom Friend: Tap the TAP Button twice.
• Start/End Conversation with the Third Intercom Friend: Tap the TAP Button three times.

Configuration Menu

• Accessing the Configuration Menu: Press and hold the TAP button for 10 seconds.
• Navigating Between Menu Options: Tap the TAP button once for each option.
• Execute Menu Options: Tap the (+) or (-) button to select an option and then tap the TAP button once to confirm.

Troubleshooting

Fault Reset

To perform a fault reset, locate and press the pinhole reset button using a paperclip. This does not reset the device to factory defaults. The charging LED is not the reset button.

Factory Reset

To perform a factory reset:

1. Press and hold the TAP button for 10 seconds to enter the configuration menu.
2. Tap the (-) button twice to select 'Factory reset'.
3. Tap the TAP button once to confirm. The headset will reset to factory default settings.

Quick Reference