CommScope P-008-MP-8W1C-F30YL Fiber Indoor Cable

Fiber indoor cable, Plenum for MPO Light Duty Patchcords, 8 fiber, Singlemode G.652.D and G.657.A1, Feet jacket marking, Yellow jacket color.

Product Classification

Regional Availability: Asia | Australia/New Zealand | Latin America | Middle East/Africa | North America
Portfolio: CommScope®
Product Type: Fiber indoor cable
Product Series: P-MP

General Specifications

Cable Type	MPO trunk cable
Construction Type	Non-armored
Subunit Type	Gel-free
Jacket Color	Yellow
Jacket Marking	Feet
Total Fiber Count	8

Dimensions

Diameter Over Jacket

3 mm | 0.118 in

Representative Image

The cable cross-section shows an Outer Jacket, Aramid Yarn for strength, and 250 µm Optical Fiber strands.

Mechanical Specifications

Minimum Bend Radius, loaded	45 mm \| 1.772 in
Minimum Bend Radius, unloaded	24 mm \| 0.945 in
Tensile Load, long term, maximum	100 N \| 22.481 lbf
Tensile Load, short term, maximum	334 N \| 75.086 lbf
Compression	4 N/mm \| 22.841 lb/in
Compression Test Method	FOTP-41 \| IEC 60794-1 E3
Flex	300 cycles
Flex Test Method	FOTP-104 \| IEC 60794-1 E6
Impact	0.74 N-m \| 6.55 in lb
Impact Test Method	FOTP-25 \| IEC 60794-1 E4
Strain	See long and short term tensile loads
Strain Test Method	FOTP-33 \| IEC 60794-1 E1
Twist	10 cycles
Twist Test Method	FOTP-85 \| IEC 60794-1 E7
Vertical Rise, maximum	500 m \| 1,640.42 ft

Optical Specifications

Fiber Type

G.652.D and G.657.A1, TeraSPEED® | OS2 | OS2

Environmental Specifications

Installation temperature	0 °C to +70 °C (+32 °F to +158 °F)
Operating Temperature	0 °C to +70 °C (+32 °F to +158 °F)
Storage Temperature	-40 °C to +70 °C (-40 °F to +158 °F)
Cable Qualification Standards	ANSI/ICEA S-83-596 \| Telcordia GR-409
Environmental Space	Plenum
Flame Test Listing	NEC OFNP (ETL) and c(ETL)
Flame Test Method	NFPA 130 \| NFPA 262

Environmental Test Specifications

Heat Age	0 °C to +85 °C (+32 °F to +185 °F)
Heat Age Test Method	IEC 60794-1 F9

Low/High Bend Specifications

Low High Bend	0 °C to +70 °C (+32 °F to +158 °F)
Low High Bend Test Method	FOTP-37 \| IEC 60794-1 E11
Temperature Cycle	0 °C to +70 °C (+32 °F to +158 °F)
Temperature Cycle Test Method	FOTP-3 \| IEC 60794-1 F1

Packaging and Weights

Cable weight

8.9 kg/km | 5.981 lb/kft

Included Products

CS-8W1-MP TeraSPEED® OS2 Singlemode Fiber

Footnotes

* Operating Temperature: Specification applicable to non-terminated bulk fiber cable

	CommScope P-012-MP-8W1C-F30YL Fiber Indoor Cable - Technical Specifications Detailed technical specifications for the CommScope P-012-MP-8W1C-F30YL MPO trunk cable, featuring 12 fibers, Singlemode G.652.D and G.657.A1, Plenum rating, and yellow jacket.
	CommScope TeraSPEED P-024-MP-8W-F12BK Fiber Optic Cable Specifications Detailed technical specifications for the CommScope TeraSPEED P-024-MP-8W-F12BK fiber indoor cable, covering product classification, general, mechanical, optical, environmental, and regulatory compliance details.
	CommScope TeraSPEED® P-096-MP-8W-F12YL Fiber Indoor Cable Specifications Detailed technical specifications for the CommScope TeraSPEED® P-096-MP-8W-F12YL Plenum MPO Trunk Cable, featuring 96 single-mode fibers, G.652.D and G.657.A1 compatibility, and yellow jacket.
	CommScope TeraSPEED® Plenum MPO Trunk Cable P-048-MP-8W-F12WH - Technical Specifications Detailed technical specifications for the CommScope TeraSPEED® Plenum MPO Trunk Cable (P-048-MP-8W-F12WH), including product classification, general, mechanical, optical, environmental, and regulatory compliance data.
	CommScope P-012-MP-8W-F12YL TeraSPEED OS2 Singlemode Fiber Cable Specifications Detailed technical specifications for the CommScope P-012-MP-8W-F12YL TeraSPEED OS2 Singlemode Fiber indoor cable, including product classification, general, mechanical, optical, and environmental performance data, as well as regulatory compliance.
	CommScope P-024-MP-8W-F120R TeraSPEED Fiber Indoor Cable Specifications Detailed technical specifications for the CommScope P-024-MP-8W-F120R TeraSPEED Plenum MPO trunk fiber indoor cable, including mechanical, optical, environmental, and regulatory compliance data.
	CommScope P-048-MP-8W-F120R TeraSPEED Plenum MPO Trunk Cable Specifications Detailed specifications for the CommScope P-048-MP-8W-F120R TeraSPEED Plenum MPO Trunk Cable, featuring 48 fibers, Singlemode G.652.D/G.657.A1, gel-free construction, and orange jacket.
	CommScope P-072-MP-8W-F12GR TeraSPEED Fiber Indoor Cable Specifications Detailed technical specifications for the CommScope P-072-MP-8W-F12GR TeraSPEED Plenum MPO Trunk fiber indoor cable, including mechanical, optical, environmental, and regulatory compliance data.