Beta Build: 17.15.1EFT4
17.15.1EFT4 Interim/Beta Release 4th Refresh.
The following Beta software is posted on the cisco.com:
| Image Name | MD5 Checksum | Supported Platforms |
|---|---|---|
| C9800-L-universalk9_wlc.17.15.01prd21.SPA.bin | 4ec41954b14ea1cc5b088d9d385aff41 | Interim software for C9800-L, C9800-LC, C9800-LF platforms |
| C9800-universalk9_wlc.17.15.01prd21.SPA.bin | 9e895164696fdfc86f533d2c0c369e0b | Interim software for C9800-80/40 platform |
| C9800-CL-universalk9.17.15.01prd21.SPA.bin | 6a1b9a56a81d06b2c428574db293f979 | Interim software for C9800-CL platform |
| CW9800-wlc-universalk9.17.15.01prd21.SPA.bin | 646f70dbde4abfe8ef834fa4ae66f682 | Interim software for CW9800-H/M platform |
| C9800-AP-universalk9.17.15.01prd21.zip | c5f6095eff099e37829bd1cf33e1a655 | Interim software for C9800 EWC platform |
Resolved Caveats
| Issue ID | Description |
|---|---|
| CSCwh56566 | 9800 manual flow record parameters causing flow monitor to fail and not been able to remove it |
| CSCwh80060 | COS APs connected with 9800 WLC losing Flex WLAN VLAN mapping |
| CSCwh81071 | 91xx Country for Radio Slot 0/2 shows Blank or NA |
| CSCwi16509 | Loadbalancer server holding wrong AP IP address and stale AP entries seen |
| CSCwi22895 | WLC Crash due to ReloadReason=Critical process rrm fault on rp_0_0 (rc=134) |
| CSCwi27380 | Media stream feature is not working |
| CSCwi28382 | WLC crash due Keymgmt: Failed to eapol key m1 retransmit failure. Max retries for M1 over |
| CSCwi55714 | Cat9800 WLC Reboot when Handling NMSP TLS Connection |
| CSCwi56780 | The MAB is not initiated unless that the device is deauthenticated |
| CSCwi69251 | C9800-40 // 17.12.02 crashes on Critical process rrm fault on rp_0_0 |
| CSCwi75759 | C9800-40 WLC reload due to Critical process wncd fault on rp_0_1 (rc=139) |
| CSCwi99276 | NAC is not in the policy profile configuration when deployed from Prime Infrastructure |
| CSCwj08367 | 9800 segmentation fault - Process = IGMPSN |
| CSCwj09698 | C9800 Unexpected Reset in wncmgrd with a scaled setup and managed by the Meraki Dashboard |
| CSCwj25187 | Redundancy details not populated in GUI for EWC. |
| CSCwj26196 | WLC crash due Keymgmt: Failed to eapol key m1 retransmit failure. Max retries for M1 over |
| CSCwj31356 | C9800 WLC reboot due to RRM process fault |
| CSCwj36962 | C9800 WLC unexpected cpp_mcplo-ucode restart due to invalid QOS parameters |
| CSCwj42408 | 9800 Posturing flow not working while PMF is Optional |
| CSCwj68763 | Enhanced URL missing after Flex AP CAPWAP flap |
| CSCwj79545 | IOS-XE WLC unexpected reboot wncd process reboot due to assertion failed with invalid BSSID |
| CSCwj86938 | 9800 Memory leak in scale network with telemetry sending client events to DNAC |
| CSCwj93153 | C9800 Might Reload Unexpectedly due to wncmgrd Process Fault |
| CSCwk05030 | WLC crash due to Critical software exception |
| CSCwk35891 | C9800 WLC crashed after issuing "clear ap geolocation derivation" |
| CSCwk44459 | Loadbalancer server holding wrong AP IP address and stale AP entries seen |
| CSCwh88246 | URL Filter not applied after invalid configuration |
| CSCwi01382 | 9800 support for -E domain access points in Gabon |
| CSCwi29216 | Unsupported character in description prevents re-sync |
| CSCwi44211 | show run results (trapflags ap noradiocards) are different from restore config |
| CSCwi47294 | WLC changes - Per client rate limit with flex connect local switching APs is not working |
| CSCwi48980 | WLC 9800 local password policy not taking effect as expected for GUI login |
| CSCwi50732 | C9800 VLAN group for static IP client does not work on FlexConnect Central Switching |
| CSCwi64010 | WLC accepts reserved IPv6 mcast addr to be configured as Mobility Multicast Ipv6 address |
| CSCwi66582 | C9800 returns 400 bad request error when uploading backup file with FTP on GUI |
| CSCwi69093 | WLC GUI showing incorrect number of clients attached on AP |
| CSCwi70760 | 9800 encrypts ApDnaGlobalCfg token when password encryption aes is config increasing size of toke |
| CSCwi83124 | Dark Mode Display Issue on Catalyst 9800 - Pop ups and Rogue AP Rules Data not visible |
| CSCwj00465 | C9800: Active controller become ActiveRecovery when RP link down on 17.9 |
| CSCwj01446 | PIV auth requires additional backslash on the redirection URL for it to work. |
| CSCwj04177 | AP doing 802.1X will fail authentication if password is more than 31 characters |
| CSCwj15376 | Multiple NMSP security protocol problems |
| CSCwj25110 | OIDs bsnAPIfStationCountOnRSSI and bsnAPIfStationCountOnSNR are reporting incorrect values on 9800 |
| CSCwj29406 | sh ap summary sort descending client-count command showing wrong client count |
| CSCwj33376 | Incorrect selection of all APs in load balancing, and invalid minimum client count criteria |
| CSCwj33979 | "show ap summary" output taking more than 6+ minutes to complete |
| CSCwj34379 | Cat9K Wireless Controller: WNCd Crash when Accessing Crimson Database |
| CSCwj40202 | 9800 not sending RADIUS acct msg when client send subsequent assoc req before client is moved to RUN |
| CSCwj42562 | PC Analytics Statistics Not Displayed on GUI |
| CSCwj60910 | RRM message mismatch between WLC9800 and PI report. |
| CSCwj67158 | 9800 not sending ADD mobile to AP if CoA is received when client is ip learn for dot1x SSID |
| CSCwj72370 | C9800 Controller use incorrect username for 'show platform' command when login WEB GUI |
| CSCwj76892 | 2802 Low downlink speed noticed due to WLC not configuring aggregation schedule parameter correctly. |
| CSCwj77128 | URL Filter Only Allow Letters as First Character |
| CSCwj83935 | 9800 show tech X is empty if previous sh tech X term length stop didn't finish before SSH close |
| CSCwj94201 | C9800 crash due to CPUhog, watchdog timeout by IGMPSN process. |
| CSCwj96620 | Syntax errors in CISCO-LWAPP-DOT11-CLIENT-MIB |
| CSCwj96666 | Syntax errors in CISCO-LWAPP-DOT11-MIB |
| CSCwj97107 | Standby does not take the active role after reloading the active controller with "reload slot X" |
| CSCwk02633 | RSA keypair in the config when selecting a EC key on the GUI |
| CSCwk25182 | C9800 Password Policy alert while login GUI using tacacs credential after upgrade to 17.14.x |
| CSCwk28680 | C9800-L/CL Unexpected reload due to QFP ucode while updating drop stats |
Important Notes
Beta/EFT image is a temporary release delivery of fixes until CCO release is available. Cisco EFT and Betas are covered by Cisco Non-disclosure agreement. Customers are requested to migrate to next CCO release as soon as it is available. We request you to drop a note to wnbu-mrbeta@external.cisco.com. Any feedback would be appreciated either via TAC or this alias.
ENGINEERING SPECIAL USE DISCLAIMER
The Engineering Special fix supplied herewith is a Temporary Software Module which has undergone limited testing. This temporary software module is provided "AS-IS" without warranty under the terms of the END USER LICENCSE FOR THIS PRODUCT. Please use this software at your own risk. The intention for this code fix is for you to use in your production environment until a released version is available.
This code is supported by the TAC organization. Please report all comments, suggestions, and problems about this code directly to wnbu-escalation@cisco.com. If you are satisfied with the solution, please inform the alias.
Contact wnbu-escalation@cisco.com with any questions.
