Blaupunkt BP-MF06 Coffee Grinder

Product Overview

This document is the user manual for the Blaupunkt BP-MF06 Coffee Grinder.

Manufacturer: Guangdong Lanbao Intelligent Technology Co., Ltd.

Service Hotline: 4009310636

Address: Unit 3, 1/F No. 8 Shangyi Road, Nantou Town, Zhongshan City

The product image shown is for reference; please refer to the actual product in the packaging.

Enjoy it.

Product Name: COFFEE GRINDER

Model: BP-MF06

Table of Contents

• Important Safety Precautions
• Product Parameters
• Operation Instructions
• Control Panel
• Button Operation Instructions
• Maintenance and Cleaning
• Troubleshooting Guide
• Precautions
• Food Contact Material List
• Circuit Diagram
• Environmental Information
• Warranty Card

Important Safety Precautions ⚠️

1. Read all instructions before use.
2. To prevent fire, electric shock, and personal injury, do not immerse the cord, plug, or appliance in water or other liquids.
3. This product is not intended for use by children or persons with reduced physical, sensory, or mental capabilities, unless they are closely supervised by a responsible adult who can ensure safe operation.
4. Disconnect the plug from the socket when not in use, before assembling or disassembling parts, and before cleaning. To unplug, grasp the plug and pull from the socket; do not pull the power cord.
5. Do not operate the appliance if the power cord or plug is damaged, or if the appliance malfunctions. Return the appliance to an authorized service center for inspection and repair.
6. Using non-original approved parts may cause fire, electric shock, or injury.
7. Do not use outdoors, in moving vehicles, on boats, or aircraft. Do not use on inclined surfaces.
8. Do not let the power cord hang over the edge of a table or counter, touch hot surfaces, or become knotted.
9. Check the bean hopper for foreign objects before use.
10. Ensure the bean hopper lid is in place before operating the product.
11. Do not place the appliance on or near gas or electric burners, or in a heated oven.
12. This product is designed for household use only. Any commercial use, improper use, or failure to follow the instructions will void the warranty.
13. This product is only for roasted coffee beans. Do not use it for other purposes (e.g., hard seeds, herbs, nuts) to avoid damaging the appliance.
14. All appliances undergo strict inspection and actual grinding tests before leaving the factory, which may result in minor signs of use or coffee residue.
15. If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person to avoid hazards.

Product Parameters

Product Name: Coffee Bean Grinder

Product Model: BP-MF06

Rated Voltage: 220V~

Rated Frequency: 50Hz

Rated Power: 180W

Product Dimensions: 128x203x342 (mm)

Execution Standards: GB4706.1-2005, GB4706.30-2008

Operation Instructions

First Use

Before using the coffee bean grinder for the first time, wipe the exterior and the bean hopper with a clean, damp cloth. Wash the coffee powder cup and lid with warm soapy water, then rinse and air dry.

Diagram Description:

• Bean Hopper Lid
• Bean Hopper
• Upper Burr
• Grind Size Adjustment Ring
• Control Panel
• Main Body

Note: Power Saving Mode: If the appliance is not used for over 3 minutes, it will automatically enter power saving mode. Pressing any button will resume operation.

How to Remove Bean Hopper and Upper Burr

1. Ensure the coffee bean grinder is unplugged. ?
2. Press the lever on the grind size adjustment ring (located next to the unlock symbol ?).
3. Turn the bean hopper counter-clockwise until the unlock symbol ? aligns with the arrow ➡️, then lift the bean hopper.
4. Hold the upper burr handle and turn it counter-clockwise, then lift it vertically.

Installing Bean Hopper and Upper Burr

1. Place the upper burr into position. Turn the handle clockwise until you hear a "click" sound; installation is complete.
2. Ensure there are no coffee grounds or residue on the top of the conical burr. If there is, use the provided brush to clean it. ?️
3. Align the unlock symbol ? on the bottom of the bean hopper with the arrow ➡️ on the grind size adjustment ring.
4. With your other hand, turn the bean hopper clockwise until the lock symbol ? aligns with the arrow ➡️.

Notes:

• To ensure the upper burr is installed correctly, clear any coffee grounds or residue from the lower burr before installation.
• The grinder will not start if the bean hopper is not properly seated.

Control Panel

Diagram Description: A digital display screen with several buttons.

• Cup Count Button (☕): Time range: 2.0-4.0 seconds.
• Portafilter Button (☕): Time range: 5.0-20.0 seconds.
• Increase Button (➕): Increases cup count or time (hold for rapid increase).
• Decrease Button (➖): Decreases cup count or time (hold for rapid decrease).
• DIY Button (⚙️): Time range: 3.0-30.0 seconds.
• Power/Standby Button (⏻): Turns the unit on/off or puts it in standby mode.

Button Operation Instructions

1. Add the appropriate amount of coffee beans to the bean hopper.
2. Rotate the grind setting ring to select the desired coffee bean grind fineness.
3. Cup Count Button (☕):
   • Upon connecting power, the buzzer will sound once, and all indicators will light up briefly for self-check.
   • The LED display will show "3.0" and flash, with the "Cup Count" button and its icon illuminated.
   • To adjust the cup count, press the ➕ or ➖ buttons. The range is 1-10 cups.
   • To start grinding, press the Power/Standby button (⏻). The timer on the screen will count down. Press any button to stop.
   • Press and hold for 3 seconds: The screen will flash, entering the cup count time adjustment setting. Each press of the ➕ or ➖ button adjusts the time by 0.1 seconds. After 3 flashes, the display stops flashing, and the new grinding time is set successfully.
4. Portafilter Button (☕):
   • Insert the portafilter. The "Portafilter" button and its icon will illuminate. The screen will display the portafilter grinding time, defaulting to 7.0 seconds.
   • To start grinding, press the Power/Standby button (⏻). The timer on the screen will count down. Press the Power/Standby button (⏻) to stop.
   • After pressing the "Portafilter" button, the screen will flash, entering the portafilter time adjustment setting. Each press of the ➕ or ➖ button adjusts the time by 0.1 seconds. After 3 flashes, the display stops flashing, and the new grinding time is set successfully.
5. DIY Grinding Button (⚙️):
   • After powering on, press the "DIY Grinding" button. The "DIY Grinding" button will illuminate, and the LED will display "3.0".
   • To start grinding, press the Power/Standby button (⏻). The timer on the screen will count down. Press the Power/Standby button (⏻) to stop.
   • After pressing the "DIY Grinding" button, the screen will flash, entering the DIY time adjustment setting. Press the ➕ button to adjust the grinding time. The default range is 3.0-30.0 seconds.
   • Each press of the ➕ or ➖ button adjusts the time by 0.1 seconds. After 3 flashes, the display stops flashing, and the new grinding time is set successfully.
6. Portafilter and Cup Indicators: The portafilter indicator light ▀ illuminates when the portafilter holder is inserted. If the portafilter holder is not inserted, the light ? illuminates.
7. Power/Standby Button (⏻):
   • After setting the grinding time, press the Power/Standby button (⏻) to start operation.
   • To stop mid-operation, press the Power/Standby button (⏻) or any other button to stop.
   • The screen will automatically turn off if there is no operation for over 3 minutes.

Coffee Grind Size Adjustment

1. Place the coffee powder cup correctly.
2. Open the bean hopper lid and add coffee beans. Close the lid. You can now adjust the coffee grind size.
3. The coffee grinder offers 52 levels of grind adjustment. To adjust the grind fineness, rotate the bean hopper. Adjust from fine to coarse according to the type of coffee you are brewing.

Note: For more precise adjustment of the coffee grind fineness, it is recommended to rotate the bean hopper while the grinder is operating.

Coffee Grind Size Chart

Adjust grind fineness during operation for precise results.

Diagram Description: Visual representations of different grind sizes corresponding to coffee brewing methods.

Maintenance and Cleaning ?

To maintain the coffee's aroma and prevent spoilage, empty the coffee grounds container after each use.

• Always unplug the power cord before cleaning. ?
• Do not immerse the grinder, power cord, or plug in water. ?
• Do not use strong detergents or abrasive cleaners on the appliance.
• Follow these steps to clean the internal burrs:

Diagram Description:

1. Press the unlock button ? and remove the bean hopper.
2. Clean any remaining coffee beans from the bean hopper.
3. Align the unlock symbol ? on the bottom of the bean hopper with the arrow ➡️ on the grind size adjustment ring.
4. Install the bean hopper correctly.
5. Install the outer burr. Turn clockwise until it clicks into place.
6. Clean the outer burr with a brush. ?️
7. Clean the inner burr with a brush. ?️
8. Clean the interior of the main body.
9. Clean the outlet.
10. Install the outer burr. Turn clockwise until it clicks into place.
11. Install the bean hopper.
12. Lock the bean hopper.

Regular cleaning of the conical burrs not only maintains hygiene but also extends their lifespan.

Troubleshooting Guide ❓

Precautions ?

• Freshly ground coffee is key to a rich and delicious coffee flavor.
• Coffee flavor and strength can be adjusted to personal preference by changing coffee bean types, amounts, and grind fineness for your ideal taste.
• It is best to use fresh coffee beans with a clearly marked roasting date.
• Store coffee beans in a dark, cool, and dry environment.
• If possible, use vacuum-sealed packaging.
• Purchase coffee beans in small batches to minimize storage time; ideally, consume within one week of storage.
• Once coffee beans are ground into powder, their aroma dissipates quickly. For the best brewing results, brew coffee immediately after grinding.
• Do not store coffee beans in the bean hopper for extended periods.
• When storing the appliance after use, operate it to grind any remaining beans and then clean it thoroughly.
• Regularly clean the bean hopper and powder cup.

Food Contact Material List

Circuit Diagram ⚡

Diagram Description: The circuit diagram shows the electrical components and connections for the coffee grinder. Key components include:

• Motor (M): The main component for grinding.
• Control Board: Manages the operation of the grinder.
• Power Board: Distributes power.
• Micro Switch: Detects the presence of the bean hopper or portafilter.
• Power Input: 220V~50Hz.
• Capacitors (C1, C2) and Inductors (L1, L2): Components for motor control and filtering.

The diagram illustrates the flow of power from the input through the control and power boards to the motor, with the micro switch acting as a safety interlock.

Environmental Information ?

Substances in Product and Their Content

Notes:

• This table is compiled according to SJ/T11364.
• '○': Indicates that the content of this hazardous substance in all homogeneous materials of the part is below the limit requirement specified in GB/T 26572.
• 'X': Indicates that the content of this hazardous substance in at least one homogeneous material of the part exceeds the limit requirement specified in GB/T 26572.
• Parts marked with 'X' indicate that due to current global technological and process limitations, complete substitution of environmentally hazardous substances or elements is not feasible. Improvements will be made gradually with technological advancements.

Environmental Use Period: The number within this symbol indicates the product's environmental-friendly use period is 10 years. This period refers to the duration within which hazardous substances contained in the product will not leak or mutate. When the product is used normally according to the user manual, it will not cause serious environmental pollution or severe harm to personal safety or property.

New products may have a slight odor upon opening the package or during initial use. This odor will gradually dissipate with ventilation and use, which is normal. This product complies with relevant national food safety and safety standards. Please use it with confidence.

Warranty Card ?️

Please fill in all fields of this warranty card in detail.

Customer Information:

• Name: _________________________
• Address: _________________________
• Phone: _________________________
• Purchase Date: _________________________

Warranty Service:

1. This product is covered by free service for one year from the date of purchase under normal operating conditions.
2. If replacement parts are required after the warranty period, a service fee will be charged at the company's discretion.
3. During the warranty period, free repair will not be provided under the following circumstances:
   • Failure to present the warranty card or proof of purchase (invoice or receipt).
   • Repairs beyond the scope of the warranty.
   • Damage caused by disassembly or modification.
   • Damage caused by misuse, negligence, or improper operation.
   • Malfunctions or damage caused by non-typical household use (e.g., prolonged use in harsh environments).
   • Natural wear and tear of the exterior due to use.

Inspector: _________________________

Dealer Stamp: