Bestway Hydro-Force SUP: Safety, Usage, and Maintenance Guide

Important Safety Instructions

• Read and follow all instructions carefully before inflating and using the SUP.
• Understand and adhere to all information in this manual.
• These warnings and guidelines address common risks but cannot cover all situations. Your safety is paramount; always heed advice and warnings. Non-compliance can lead to serious danger or death. Use the product only as intended.
• Keep instructions safe; search online if missing.
• Stand-up paddling is a dangerous sport exposing users to unexpected risks. Users must be aware of and understand these risks.
• Respect all safety instructions described in the manual.
• Never exceed the maximum recommended load for persons and equipment, regardless of the number of people on board.
• Do not use the product under the influence of alcohol, drugs, or medications.
• Always use and pre-inspect life-saving devices like life jackets and buoys. Always wear a helmet when using the product.
• Always paddle with an experienced partner.
• Inform your partner of your routes and schedules.
• Check weather forecasts for marine conditions before starting. Bad weather and marine environments are dangerous.
• Never use the product in conditions beyond your ability (e.g., high surf, strong currents, river rapids).
• Use the product near the shore and be aware of natural factors like wind, tides, and tidal waves. Be aware of offshore winds and currents.
• Before each use, inspect the product for wear or leakage. Do not use if damaged.
• Do not surf in unfamiliar water areas.
• Beware of harmful liquids like battery acid, oil, and petrol, as they can damage the product.
• Inflate according to the rated pressure to avoid over-inflation or explosion.
• Maintain balance; uneven load distribution can cause capsizing and drowning.
• Learn how to operate the product. Seek local information and training as needed. Be aware of local regulations and dangers related to water activities.
• The hand pump's pressure gauge shows pressure above 5 PSI; this is normal. If pressure is below 5 PSI, the gauge will not show a value.
• Extended sun exposure can shorten the SUP's lifespan. Do not leave SUPs in direct sunlight for more than 1 hour after use.

Maintenance and Long Time Storage

• Store in a cool, dry place, out of children's reach.
• Do not unfold the product in low temperatures.
• The product should be kept at room temperature (over 20°C) for 24 hours before inflation.
• Deflate the SUP completely before folding.
• Follow "A" steps for quick, temporary storage.
• Follow "B" steps for long-term storage (only for models 65347/65375).

Usage and Assembly Guidance

The following describes typical steps shown in the diagrams:

• Inflation: Connect the pump to the SUP valve. Pump air into the SUP, monitoring the pressure gauge to ensure it is above 15 PSI (1 Bar). Secure the valve cap after inflation.
• Accessory Attachment: Attach components such as fins, leashes, or seats to the designated points on the SUP.
• Folding and Storage:
  • For quick storage (Method A): Deflate the SUP and fold it lengthwise.
  • For long-term storage (Method B): Deflate the SUP completely, fold it according to specific instructions, and place it in its storage bag.
• General Steps: Includes inflation, accessory attachment, pressure check, usage, and time indicators (30 sec, 24h) possibly for drying or waiting periods.