Onn. Google TV 4K Streaming Box Quick Start Guide
What's in the Box
Ensure you have all the following items:
- Onn. Google TV 4K Streaming Box x1
- Remote Control x1
- Quick Start Guide x1
- Batteries x2 (AAA)
- Adhesive Tape x1
- HDMI Cable x1
- Power Adapter x1
Remote Control
The remote control features the following buttons:
- Standby on/off [power-symbol]
- Profile
- Enter
- Up/Down/Left/Right direction buttons
- Back
- Volume up/down
- Quick Launch Buttons (e.g., Netflix)
- Google Assistant [microphone-symbol]
- Input
- Dashboard
- Live TV EPG
- Home
- Channel up/down
- Mute
Setup
Follow these steps to set up your streaming box:
- Connection: Connect the streaming box to your TV using the HDMI cable. Connect the power adapter. A white LED indicates Power On, and a red LED indicates Standby.
- Bluetooth Pairing: Insert 2 AAA batteries into the remote. Follow on-screen instructions. Press and hold the [back-button] and [home-button] buttons until pairing is successful.
- Networking: Select your WiFi network and enter the password.
- Setup Complete: Follow the on-screen instructions to set up Google TV™.
Reset Button:
- Remote Reset: Long press the button for 5 seconds to reset the remote pairing.
- Box Reset: Long press the reset button and power on the box simultaneously for 5 seconds to enter the reset interface for data removal.
Safety Information
General Warnings:
- Caution: Presence of live parts inside the device! Do not open. Risk of electric shock!
- No user-repairable parts inside.
- Place the device on a flat, firm, and stable surface. Do not place on carpets or rugs.
- Ensure the device is in a well-ventilated location to prevent overheating.
- Do not place objects near the device that could cause damage (e.g., liquids, open flames).
- Battery Safety: Do not mix old and new batteries, or alkaline, standard, and rechargeable batteries.
Environmental Conditions:
- Appropriate Operating Temperature: 0°C to 40°C
- Appropriate Operating Humidity: 5%~85% Non-condensing
Troubleshooting
- No display after power on: Ensure the HDMI cable is properly connected. Check if the TV is in sleep mode and press the power button on the remote to wake it.
- TV has images but no sound: Verify the TV is not muted or has its volume too low.
- Fail to connect to the network: Confirm your Wi-Fi is functional and the box has a strong signal from the router.
- Remote control failure: Replace the remote's batteries with new ones, ensuring correct polarity. Ensure the remote is within range of the TV box. Long press the reset button on the streaming box for 5 seconds to reset the remote pairing.
Please use original accessories for safety and optimal performance.
Compliance
FCC Statement: This equipment complies with Part 15 of the FCC Rules for a Class B digital device, designed to provide reasonable protection against harmful interference in residential installations. If interference occurs, try reorienting the antenna, increasing separation between equipment and receiver, connecting to a different outlet, or consulting a dealer/technician.
FCC Radiation Exposure Statement: This device complies with FCC radiation exposure limits for an uncontrolled environment. Installation and operation require a separation distance of at least 20 cm from all persons. Operation is subject to two conditions: no harmful interference, and acceptance of received interference. Changes not expressly approved by the responsible party may void the user's authority to operate the equipment.
Dolby Audio: Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
HDMI: The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Trademarks: Google TV is a trademark of Google LLC. Google and YouTube are trademarks of Google LLC. Netflix is a trademark of Netflix, Inc. All other brands are trademarks of their respective owners.
