Onn. Full HD Streaming Device Quick Start Guide
This guide provides instructions for setting up your Onn. Full HD Streaming Device with Google TV.
Front View
The front of the device features the Onn. and Google TV logos.
What's Included
The package contains the following items:
- Full HD Streaming Device Stick x1
- Quick Start Guide x1
- Remote Control x1
- Batteries x2
- Power Adapter x1
- HDMI Cable x1
Safety Information
General Precautions:
- Protect the device from high temperatures, humidity, water, and dust.
- Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cd, ni-mh, etc.) batteries.
- Place the device on a flat, firm, and stable surface. Do not place it on a carpet or rug.
- Do not place objects near the device that may damage it (e.g., liquid-filled objects or candles).
- Place the device in a well-ventilated location to prevent internal heat accumulation.
- WARNING: Presence of live parts inside the device! Do not open. Risk of electric shock!
Battery Replacement:
CAUTION: Risks of explosion if the battery is replaced by an incorrect type.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure can result in an explosion or leakage of flammable liquid or gas.
Device Environment:
- Appropriate Operating Temperature: 32°F to 104°F (0°C to 40°C).
- Appropriate Operating Humidity: 5%~85% Non-condensing.
Remote Control
The remote control includes buttons for:
- Standby on/off
- Enter
- Input
- Google Assistant
- Navigation (Up/Down, Left/Right)
- Back
- Live TV EPG
- Home
- Volume Up/Down
- Channel Up/Down
- Mute
- Quick Launch buttons (e.g., Netflix)
Setup Instructions
-
Start Up TV
Turn on your TV before using the Onn. Full HD Streaming Device.
-
Connection
Connect the streaming device to your TV using an HDMI cable. Note the HDMI input port used (e.g., HDMI1). Connect the power adapter to the device. The LED indicator will turn white when powered on.
- HDMI: Connect an HDMI cable from the streaming device to your high-definition TV.
- Micro USB: Connect the Power Adapter to power on the streaming device.
- LED Indicator: White indicates active state.
- Reset: Long press the reset button on the streaming box for 5 seconds to reset the remote pairing.
-
Set Input Source Of TV
On your TV, navigate to the Inputs page and select the HDMI input source you connected the device to (e.g., HDMI1).
-
Remote Pairing
Insert the 2 AAA batteries into the remote. Hold both the BACK and HOME buttons on the remote until pairing is successful.
-
Select Language
Follow the on-screen instructions to select your language and region (e.g., English (United States), English (Canada), Spanish (Puerto Rico)).
-
Select a Way to Set Up
You can set up using the Google Home app or directly on the TV:
- On the Google Home app: Install the app, open it, and scan the QR code displayed on the TV.
- On TV: Follow the on-screen setup instructions.
-
Wi-Fi Connection
Select your Wi-Fi network and enter the password.
-
Sign in to your Google Account
Log in to start your personalized Google TV experience.
-
Subscribe Channel
Follow the on-screen instructions to subscribe to your favorite apps.
-
Remote Control Set Up
Follow the on-screen instructions to set up your remote.
-
Start Exploring
Your Google TV experience is ready. Start exploring!
Troubleshooting
- No display after power on? Confirm the HDMI cable is plugged in properly. Ensure your TV is not in sleep mode; press the power button on the remote to wake it up.
- TV has images but no sound? Check if your TV is muted or the volume is too low.
- Fail to connect to the network? Verify that Wi-Fi is functional and that your device has a strong signal from your router.
- Remote control failure? Replace the remote control batteries with new ones, ensuring correct polarity. Make sure the remote is within range of the TV box. Long press the reset button on the streaming box for 5 seconds to reset the remote pair.
Please use the original accessories to ensure safety and a better experience.
Compliance
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Dolby Audio
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
HDMI
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Trademarks
Google TV is the name of this device's software experience and a trademark of Google LLC. Google, YouTube, and Google Home are trademarks of Google LLC. Netflix is a trademark of Netflix, Inc. All brands contained herein are trademarks of their respective owners.
Feedback
We'd love to hear from you. Scan with your smartphone camera and let us know what you think.
