Zansong V5 Wireless Microphone User Manual
Model: V5
Version: V1.0
Date: 2023.9.12
Product Information
This document is the user manual for the Zansong V5 wireless microphone. It provides instructions for installation and use, and should be kept for future reference.
Dimensions: 104*210mm, 4 pages
Material: 150g double copper paper
Craftsmanship: Black and white printing, folded
Manufacturer: Zansong
Front View
The front of the manual displays the Zansong logo and the model name 'V5'. It also includes text indicating 'THE FOURTH GENERATION OF ARTIST TECHNOLOGY' and 'Professional wireless microphone'.
Back View
The back of the manual shows the Zansong logo again and includes icons representing various functions or states, possibly related to the microphone's operation or charging.
Headset Microphone Description
- Blue light: Power on
- Power on/off button
- Mute button
- Blue light: Charging; Blue light off: Charging complete
- Detachable headphone
- Charging jack (DC-5V)
- Pickup
Receiver Instructions
- Audio output
- Indicator light: Blue light low voltage, white light flashes
- Power supply: Red light
- Charging: Green light
- Fully charged: Green light is off
- Power button
- DC 5V/1A Type-c charging port
Simple Troubleshooting
| Symptom | Fault Cause | Solution |
|---|---|---|
| No Response | The wireless microphone switch is not on | Push the wireless microphone switch to the open gear. |
| The receiver is not on | Turn on the microphone receiver and connect to the AV device. | |
| The receiver is not connected correctly | Please refer to the connection method of this manual and correct connection. | |
| The microphone display is off | Please replace with a new battery. | |
| The microphone receiver was disconnected | Connect the receiver to the power adapter. | |
| There is no sound | There is no proper connection to the AV device | Please connect the AV device to the speaker correctly. |
| The microphone volume is turned off to a minimum | Turn the microphone volume to the right position. | |
| AV device has no speakers connected | Connect the speaker to the AV device. | |
| The wireless microphone indicates a weak current working | Please replace with a new battery. | |
| The audio output device is incorrect | Please properly connect the audio output port. | |
| Voice Disorder / Noise after starting up | The microphone is too close to the speaker | Do not align the microphone with the speaker and do not get too close. |
| Signals nearby / There may be interference | In another place, avoid the same frequency interference. |
Comprehensive Parameters
| Frequency Range: | 195MHz |
| Modulation Mode: | FM |
| Frequency Response: | 40Hz-15KHz |
| Dynamic Range: | >100dB |
| AUDIO OUT: | 0~300mV |
| Receiver power voltage: | 3.7V-4.2V (lithium battery) |
| Receiver operating current: | <110mA |
| Receiver continuous service time: | 8-10 hours (18650 lithium battery 3.7v/1200mA) |
| 3-5 hours (Standard 3.7w/500mA) | |
| Transmitter power voltage: | |
| Transmitter operating current: | <125MA |
FCC Caution
§15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
§15.21 Changes or modification warning
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
§15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Only certified antennas can be authorized for use. Other types of antennas and/or higher gain antennas and cables may require additional authorization for operation to ensure compliance with the EIRP limits applicable to unlicensed wireless microphones.
Use Warning
- For fire or electric shock hazard, do not put the machine in rain or damp environments.
- Do not disassemble yourself. It may damage the high pressure in your hand.
