ZANSONG U18 Smart Wireless Microphone Headset
Give You A Voice
Receiver Overview
The receiver unit features the following components:
- Power Switch
- LED Light (Indicator)
- Charging Port (5V)
- Audio Output (connects to amplifier)
- Built-in lithium battery with large capacity
- Receive Antenna
Headset Overview
The headset unit includes:
- Power Switch
- Volume Up / Frequency Plus button (short press for volume, long press for frequency)
- Volume Down / Frequency Modulation button (short press for volume, long press for frequency modulation)
- Infrared Lamp
- Display Tube
- Mode Button (controls delay, reverb, high/medium/low audio settings, or battery power display)
- Mini USB Port (Micro-B charging port)
- Microphone Cartridge
Product Specifications
Parameter | Specification |
---|---|
Frequency range | 740.15~769.85MHz |
Modulation method | FM fixed frequency |
Audio response | 40hz--15khz |
Dynamic range | >100db |
Audio output | 300mv |
Receiver power supply voltage | 18650 lithium battery |
Receiver working current | <120mA |
Receiver continuous use time | (3.7V/1200mA) 7-10 hours |
Transmitter power supply voltage | lithium battery |
Transmitter working current | <120mA |
Important Notes and Precautions
Please observe the following guidelines for safe and optimal use:
- Do not throw the product into fire or water.
- Avoid use in hospitals, near airports, or in environments requiring interference-free operation.
- The product contains no user-serviceable parts. Do not disassemble it yourself, as this will void the warranty.
- If the device is dropped or foreign matter enters the unit, discontinue use immediately and contact a local dealer or authorized service center.
- When in use, avoid placing the device in dead angles to ensure good signal reception.
- Do not throw, drop, or toss the headset to prevent serious damage.
- The device is not waterproof. Avoid direct water splashes, sunlight, or rain.
- Keep away from strong electromagnetic fields, high-voltage power lines, and large metal objects.
- Do not open the device without permission, as it may contain high-voltage components that could cause injury.
- When changing the microphone or headset, ensure the power switch is set to the OFF position.
- If the microphone or headset will not be used for an extended period, remove the battery to prevent leakage.
- If the receivers have not been used for a while, unplug them from the power source.
- Do not mix old and new batteries with the headset.
Symbols:
- [Altitude Limit]: Maximum operating altitude of 2000 meters.
- [Signal Strength Indicator]: Indicates signal strength or quality.
- [Product Feature Indicator]: Denotes a specific product feature or certification.
- [Battery Life Indicator]: Represents the battery's operational duration.