CVS-52-ASST INSTRUCTION MANUAL
(CVS-58, 59, 60, 61)
DO NOT PRINT THIS LAYER
PRINT BACK TO BACK
Folded Size: 3.2" (w) x 4" (h)
Pairing name: “iHip Art Speaker”
DIELINE:
FOLDING LINE:
OUTSIDE
Zeikos, Inc.
525 7th Ave,
New York, NY 10018
#iHip
iHip: Portable Entertainment
© 2023 Zeikos, Inc. iHip is a trademark of Zeikos, Inc., Registered in the U.S. and other countries. All other trademarks and trade names are those of their respective owners. The illustrated product and specifications may differ slightly from that supplied. United States and international patent pending. All Rights Reserved. For ages 12+up. This is not a toy. Limited One Year Warranty. For warranty information please visit www.ihip.com. Designed by iHip, Manufactured in China.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by "Zeikos" is under license. Other trademarks and trade names are those of their respective owners.
Important Information:
Protect the environment by responsibly disposing of your product. The wheelie bin symbol ?️ indicates that the product must not be disposed in the domestic waste as it may contain substances that could be harmful to the environment and health. Please use proper recycling facilities when disposing of the item.
Features:
- Bluetooth® Version 5.1
- 30ft Wireless Range
- Premium audio experience
- 800mAh rechargeable battery
- Extra interchangeable design
- Perfect for any room
Package Contents:
- (1) Wireless Speaker
- (2) Wall Art
- (1) 30cm Charging Cable
- (1) User Manual
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FC
Product Image: The product is a Bluetooth Wall Art Wireless Speaker. The speaker features interchangeable artwork panels. The main unit is black with a Bluetooth logo and the text "WALL ART WIRELESS SPEAKER". Four square artwork panels are shown, depicting various scenic images: a beach sunset, a cityscape at dusk, a colorful abstract pattern, and a starry night sky. Musical note icons are placed around the artwork. Below the artwork, it reads "USER MANUAL: Retain these instructions for future reference." The unit also displays BC and FC certification logos.
FOLDING INSTRUCTIONS
Diagram showing a piece of paper folded into four panels, with arrows indicating the folding direction.
INSIDE
Specifications:
- PRODUCT: BLUETOOTH SPEAKER WALL ART ASST Speaker: 4 Ω 3W
- Model No: CVS-58
- Size: 30 x 30 x 4.6cm
- Material: MDF Board
- BT Version: 5.1
- Battery: 800mAh
- Charging time: 1H
- Cable: 30cm/Type-C Port
Charging Instructions:
For best results, fully charge the speaker before use. Connect the charging cord (included) to the charging port of the speaker and insert the other end into a PC, ACDC adapter, or similar suitable power source. The LED indicator will flash ▶️, indicating the battery is being charged. Once the speaker is fully charged, the LED light will go out.
Control Panel:
Diagram of the control panel showing:
- Type-C Charging Port
- TF Card Slot
- ON/OFF Switch
- Mode Button
- Play/Pause Button (II)
- Volume Down/Previous Track Button (/V-)
- Volume Up/Next Track Button (/V+)
Turning ON/OFF Speaker:
Move the "ON/OFF" switch to the left to turn the speaker ON. Move the "ON/OFF" switch to the right to turn the speaker OFF.
Bluetooth® Wireless Connection:
Your speaker can wirelessly stream audio from any Bluetooth® enabled device within 30 Feet. Simply follow the steps below:
- Turn ON the speaker. You will then hear the indication tone.
- Activate the Bluetooth on your mobile phone, tablet, or computer. It will search for various devices. The pairing name of this speaker is "iHip Art Speaker". Pair it with this device.
- Once paired successfully, you would hear an indication sound. (If you fail to pair it within the time frame or you want to pair it with a new device please repeat steps 1-3)
Select your favorite song on your device and music will now stream through the Bluetooth speaker.
NOTE: The speaker will automatically pair with previously paired devices.
Pairing Name: “iHip Art Speaker”
FM Mode:
Press "MODE" button to switch from Bluetooth Mode to FM Mode. When in FM mode, press the II button to automatically select the station.
TF Card Slot:
This speaker can play MP3 and WAV music files using the TF card port. Once a TF card is inserted, the speaker will auto-switch from Bluetooth mode to TF card mode. Once the TF card is removed, the speaker will auto-switch to Bluetooth mode.
Switching the Artwork:
You can change out the artwork in your speaker in 3 simple steps:
- PULL: Pull the tab (located on the bottom right of artwork) to remove the artwork from the speaker frame.
- PLACE: Place the new artwork inside the frame while ensuring the 4 velcro circles on the back of the replacement art are aligned with the 4 velcro circles inside the art frame.
- PRESS: Press art into frame to secure.
Visuals show the three steps: 1. Pulling artwork out, 2. Placing new artwork in, 3. Pressing artwork to secure.
Music Controls:
Please ensure that your device (Smartphone, tablet, or computer) is paired with the Bluetooth Speaker to stream music wirelessly. Once it is paired, play music from your device.
- Pause (Playing music): Short press the II button once to pause the music.
- Play (Paused music): Short press the II button once to resume the music.
- Previous track (Playing music): Short press the /V- button to play the previous track.
- Next track (Playing music): Short press the /V+ button to play the next track.
- Decrease Volume (Playing music): Long press the /V- button to decrease the volume.
- Increase Volume (Playing music): Long press the /V+ button to increase the volume.
Phone Call Controls:
Please ensure that your cell phone is paired with the speaker to use the below functions.
- Answer Incoming Call: Short press the II button once to answer an incoming call.
- End Call: After your phone conversation, short press the II button to end the call.
- Volume Decrease (During a call): Long press the /V- button to decrease the volume.
- Volume Increase (During a call): Long press the /V+ button to increase the volume.
- Redial last number (Standby mode & connected to a device): Short press the II button twice.
