SoundPods Instruction Manual

Folding Instructions

Diagram shows a small booklet being folded in half, then in half again, indicating how to fold the SoundPods manual.

Front

Product Image: Depicts the SoundPods wireless earbuds and their charging case. The case is open, showing the earbuds inside. Logos present include 'iHip', 'Bluetooth®', 'BC', and 'FC'.

Introduction

Components of the SoundPods and charging case:

• 1: Earbuds
• 2: Earbuds LED indicator
• 3: On/Off button
• 4: Charging case LED indicator
• 5: Charging case
• 6: Multi-function Button

Pairing Your Earbuds

Follow these steps to pair your earbuds:

1. Take your earbuds out of the Charging Case [5]. The earbuds will automatically turn on and enter pairing mode. The earbuds LED lights [2] will alternately flash between red and blue.
2. On your device, go to your Bluetooth settings.
3. Turn your device's Bluetooth function on.
4. Choose "SoundPods" from your list of devices.
5. After successful pairing, the earbuds LED will flash blue. Enjoy!

To Use Only One Earbud After Both Earbuds Were Paired

Simply put one of the earbuds back into the charging case, and the other earbud will continue to work normally.

Turn On/Off

To turn your earbuds ON:

• The earbuds will automatically turn on when taken out of the charging case.
• If the earbuds are off, press and hold the Multi-function button [6] for 3 seconds to turn them ON.

To turn your earbuds OFF:

• The earbuds will automatically turn off when placed back into the charging case.
• If the earbuds are on, press and hold the Multi-function button [6] for 3 seconds to turn them OFF.

Bluetooth Functions

Use the Multi-function button [6] on the earbuds for the following functions:

Call Functions

• Short press: Answer a call.
• Short press: Hang up if you are in a call.
• Long press (1.5 seconds): Refuse a call.
• Double click: Redial the last called number (dialed or unanswered).

Music Functions

• Short press: Pause music.
• Long press: Skip to the next song.

Back

Charging Your Device

To charge your Earbuds [1]:

• Place the earbuds in the Charging Case [5].
• The earbuds LED lights [2] will turn red when charging and blue when fully charged.
• A low battery tone will sound every 30 seconds when one earbud has a low battery level.

To charge your Charging Case [5]:

• Connect the charging case using the included micro USB charging cable.
• The charging case is fully charged when the LED indicator [4] shows 4 lights.

Specifications

• Bluetooth Version: V5.0
• Earbuds Battery Capacity: 40mAh each
• Charging Case Capacity: 300mAh
• Play Time: Up to 16 hours
• Earbuds Charging Time: About 1.5 hours
• Charging Case Time: 2 hours
• Charging Port: Micro USB

Package Includes

• 1 Pair of SoundPods Earbuds
• 1 Charging Dock
• 1 Charging Cable
• 1 User Manual

Attention

Important notes for handling and usage:

1. Handle with care. Avoid dropping, sitting on, or storing under heavy objects. Keep away from high temperatures and high humidity. Store in environments between -10°C and 60°C.
2. Keep away from high-frequency transmitting equipment like Wi-Fi routers, which may cause sound interference or disconnection.
3. Please keep the earbuds within a 10m (33 ft) range of the connected device.
4. This product is compatible with both iOS® and Android™ devices.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Legal and Warranty Information

© 2020 Zeikos, Inc. iHip is a trademark of Zeikos, Inc. iPod, iPhone, and iPad are trademarks of Apple Inc. The "Android" name, the Android logo, and other trademarks are property of Google LLC. Registered in the U.S. and other countries. The illustrated product and specifications may differ slightly from that supplied. All other trademarks and trade names are those of their respective owners. United States and international patent pending. All Rights Reserved. For ages 12+up. This is not a toy. Designed by iHip, Manufactured in China.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by "iHip" is under license. Other trademarks and trade names are those of their respective owners.

Limited One Time Warranty: To activate your product warranty, visit www.iHip.com and register this product.

Contact Information

iHip

19 Progress St

Edison, NJ 08820

www.iHip.com

[Instagram icon] [Facebook icon] Find us on Facebook.