Instruction Manual for VEVOR models including: SX-G0068, SX-G0068 Pre Lit Christmas Wreath with LED Light, SX-G0068, Pre Lit Christmas Wreath with LED Light, Lit Christmas Wreath with LED Light, Christmas Wreath with LED Light, Wreath with LED Light, LED Light
Pre-Lit Christmas Wreath with LED Light Instruction Manual MODEL: SX-G0068 MODEL: SX-G0068 Pre-Lit Christmas Wreath with LED Light The picture is for reference only, please refer to the actual. This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product. Warning-To reduce the risk of injury, user must read instructions manual carefully. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. - 1 - Product Parameter Model SX-G0068 Input DC4.5 V About 24 inch Dimension Notes: The dimension is for reference only, please prevail in kind 1. Combination 5. Chasing/ Flash Light display mode 2. In wave 3. Sequential 6. Slow fade 7. Twinkle/ Flash 4. Sloglo 8. Steady on Automatic timed loop Working for 6 hours and stopping for 18 hours Waterproof grade IPX4 Usage 1. Install bow tie. 2. Open the control box. 3. Install three batteries into the control boxaccording to the indicated electrode direction . 4. Close the control box . - 2 - 5. Press the switch . 6. Press the switch repeatedly to select different light display modes. 7. Hang up the Christmas Wreath. Sanven Technology Ltd. Address: Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730Adobe PDF Library 11.0