Bosch 360° Indoor Camera
Instruction Manual
1.0 Product Description
The Bosch 360° Indoor Camera is a Wi-Fi connected camera controllable via a smartphone app. It records relevant events and notifies the user on their smartphone. The camera allows users to view any corner of a room from anywhere at any time.
Key functions and components include:
- 360° detection range with a motorized rotating lens
- 360° motion detection and automatic alignment with movements
- Retractable lens for privacy
- Selectable motion detection sensitivity
- Pre-installed micro SD-HC card storing up to 200 events
- Full HD image quality recordings
- Night vision with automatic IR illumination
- Microphone and speaker for two-way communication
1.1 Intended Use
The product is intended for indoor use in residential buildings and should only be used with original Bosch Smart Home components. Users must strictly follow the safety and installation instructions provided in this document and the Bosch Smart Camera App. Avoid dust, moisture, and direct sunlight. Do not open or modify the product. Any use other than described in this manual or the Bosch Smart Home App is considered contrary to the intended purpose, and Bosch Smart Home GmbH accepts no liability for any consequential damage.
2.0 Box Contents
The box contains:
- 360° Indoor Camera
- Power cable
- User manuals
- 3 country-specific adapters
A micro SD-HC card (min. 8 GB) is pre-installed and can be exchanged. Note that videos on the card will be lost upon exchange.
3.0 General Information and Dangers
Please read the manual carefully before using the camera and keep it for future reference. If the device is used by other persons, provide them with this manual.
3.1 Legend
- Warning!: Alerts to danger.
- Info!: Indicates important information.
3.2 Legal Notice
Privacy: The Bosch Smart Home 360° Indoor Camera is designed for indoor use. Users are responsible for ensuring lawful use of the camera and related services in compliance with local regulations. This includes permissible uses, installation locations, image detail selection, and video storage periods. Inform all individuals present in the monitored premises about the use of the visual security solution and obtain necessary consent.
3.3 Safety Instructions
- Do not open or dismantle the 360° Indoor Camera. It contains no user-replaceable parts. Contact customer service for faults.
- Use only original parts and supplied accessories. Do not paint the camera.
- Connect the device only to an easily accessible mains socket. In case of danger, pull the mains plug.
- The device is not a toy. Keep it away from children. Do not leave packaging material unattended, as plastic film and small parts can be dangerous for children.
- Lay cables in a way that they do not endanger people or pets.
- Bosch Smart Home GmbH is not liable for property damage or personal injury resulting from improper handling or failure to observe hazard information. Warranty claims are void in such cases.
- By using the Bosch Smart Home 360° Indoor Camera, users agree not to rely on the device and its services for life safety or critical purposes. Mobile notifications are for informational purposes only. Emergency calls must always be made directly by the user. Bosch Smart Home GmbH is not liable for missing or incorrect notifications or event registrations.
4.0 Indicators and Control
4.1 Product Overview
Front View:
- 1: Wide angle lens (covers a 120° horizontal viewing angle, with 360° rotation)
- 2: Microphone
- 3: Light ring (displays camera status)
- 4: Motion detector (3 detectors with 360° coverage for motion sensing outside the viewing angle)
Back View:
- 5: SD card slot (main storage, pre-installed micro SD-HC card min. 8 GB)
- 6: Power supply input
- 7: Speaker mesh (covers loudspeaker)
- 8: Reset hole (resets all settings, deletes recordings, removes camera from system)
5.0 Initial Configuration
Before you start: Download and install the Bosch Smart Camera App to set up the 360° Indoor Camera. Ensure you have an internet connection and Wi-Fi. Have your Wi-Fi password ready and ensure your smartphone is connected to the desired Wi-Fi network.
For assistance, refer to the explanatory video at: www.bosch-smarthome.com/installation
5.1 Check the Wi-Fi Availability
The 360° Indoor Camera requires a stable and strong Wi-Fi connection. Choose a location for the camera and check the Wi-Fi signal strength using your smartphone. The table below indicates sufficient Wi-Fi connection strengths:
| Connection Strength | Suitability |
|---|---|
| 3G/4G (Not Wi-Fi) | ❌ |
| Very Weak Wi-Fi Signal | ❌ |
| Weak Wi-Fi Signal | ❌ |
| Good Wi-Fi Signal | ✔️ |
| Strong Wi-Fi Signal | ✔️ |
5.2 360° Indoor Camera Installation
When positioning the camera:
- Place the camera on a flat, level surface.
- Direct the motion sensor (below the Bosch logo) towards the center of the room.
- Position the camera to observe the desired area, avoiding windows.
The 360° Indoor Camera is not suitable for outdoor use. ❌
5.3 Power the 360° Indoor Camera
Select the appropriate plug (EU, US, UK) and attach it to the power adapter. Connect the camera to the power adapter using the power cable and plug it into a socket. The camera will boot up and prepare for configuration (approx. 50 seconds). The light ring will blink green when the camera is ready to connect to Wi-Fi.
5.4 Configuration of the 360° Indoor Camera
How to configure:
- Start the Bosch Smart Camera App and log in with your Bosch ID or register.
- In the app's overview screen, select "Add Camera".
- Follow the on-screen instructions.
- Once entries are complete, the app generates a QR code. Hold the QR code approximately 10-20 cm from the camera lens.
Ensure your phone is connected to the same Wi-Fi network you intend to use for the camera. If your router supports both 2.4 GHz and 5 GHz bands, select the 2.4 GHz band on your smartphone. Do not close or switch the app during commissioning.
When the camera recognizes the QR code, a beep will sound. The initialization routine begins, indicated by the light ring changing colors. It will then light up blue for approximately 1 minute, and the camera will be displayed in the app, ready for use. The LED ring flashes blue during video streaming. ▶️
6.0 Help and Troubleshooting
| Error | Error Indicator | Measure |
|---|---|---|
| LED off during initial configuration | LED off | Check the power supply connection. The LED is off during normal operation if the camera is not transmitting video after configuration. |
| Generic boot error | LED blinks red | Power off the camera, wait 30 seconds, then power it up again. |
| Connection to Wi-Fi failed | LED blinks alternating red and green | Check Wi-Fi signal strength on the camera and smartphone. Verify router settings: ensure DHCP is active and new device connections are allowed (check MAC address filter). In the app, tap previous, re-enter the Wi-Fi password, generate a new QR code, and show it to the camera. If the error persists for a previously working camera, check your Wi-Fi router. |
| Connection to cloud service failed | LED blinks alternating red and blue | Check your Wi-Fi router's internet connection. |
For more detailed information, such as resetting the camera to factory defaults, refer to the help section of the smartphone app and the online FAQs at www.bosch-smarthome.com/service.
7.0 360° Indoor Camera Operation
The camera is operated and controlled via the Bosch Smart Camera App. For more details on functionality, refer to the app's help section and online FAQs at www.bosch-smarthome.com/service.
You can tap the camera head twice to easily switch the camera on and off without using the app. The camera head will then extend or retract. ⬆️⬇️
8.0 Maintenance and Care
The product is maintenance-free. Clean the device with a dry linen cloth, slightly dampened if necessary for heavy soiling. Do not use solvent-based cleaning agents. Ensure no moisture enters the device.
9.0 Product Details
9.1 Technical Data
| Parameter | Value |
|---|---|
| Device type name | SVI-1609-5 |
| Resolution | 1920 x 1080 (1080p) |
| Horizontal viewing angle | 120° |
| Wi-Fi | IEEE 802.11b/g/n, 2.4 GHz |
| Wi-Fi free field range | 80 m |
| Max. transmitting capacity | 20 dBm |
| Dimensions (H x W x D) | 182 mm x 72 mm (Ø) |
| Power Supply | 5 VDC, inclusive adapter |
| Current consumption | max. 6 W |
| Weight | 396 g |
| Operational temperature | 0 °C to +40 °C |
| Software class | Class A |
| Dimensions packaging | 272 x 103 x 182 mm |
| Country of origin | China |
9.2 Declaration of Conformity
Robert Bosch Smart Home GmbH declares that the radio equipment type Bosch Smart Home 360° Indoor Camera complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: www.bosch-smarthome.com/conformity. [CE Mark]
9.3 Faults in Radio Operation
Radio operation faults may occur due to electric motors or defective electrical devices. Radio range can vary significantly indoors compared to free-field conditions. Factors like transmission power, receiver characteristics, environmental influences (humidity), and structural characteristics can affect radio operation.
9.4 Open-Source Software
This product uses open-source software. License information for the used open-source software depends on the software version of the device or app. New software versions are regularly available. Information on the current software version and used open-source software can be found in the smartphone app's settings area. Licenses and source code for open-source software are available at: www.bosch-smarthome.com/open-source-software.
9.5 Environmental Protection and Product Disposal
Electrical and electronic equipment and used batteries must be separated from other waste and recycled in an environmentally friendly manner, according to the European Directive on waste electrical and electronic equipment. Use country-specific return and collection systems for disposal.
10.0 Further Information
For more detailed information on operating and maintaining the 360° Indoor Camera, refer to the online FAQs at www.bosch-smarthome.com/service. Contact details are also on the rear side of this document.
Sale and Transfer: Before transferring or selling your device, delete your personal information by resetting the device to its factory settings (see online FAQs).
