RockJam RJ5061 61-Key Multi-Function Keyboard User Guide

Important Information

Please obey the following information so as not to harm yourself or others or damage this instrument or other external equipment.

Power adapter:

• Please use only the specified AC adapter supplied with the product. An incorrect or faulty adapter can cause damage to the electronic keyboard.
• Do not place the AC adapter or power cord near to any source of heat such as radiators or other heaters.
• To avoid damaging the power cord, please ensure that heavy objects are not placed on it and that it is not subject to stress or over bending.
• Check the power plug regularly and ensure it is free from surface dirt. Do not insert or unplug the power cord with wet hands.

Do not open the body of the electronic keyboard:

• Do not open the electronic keyboard or try to disassemble any part of it. If the device is not functioning correctly, please stop using it and send it to a qualified service agent for repair.

Use of the electronic keyboard:

• To avoid damaging the appearance of the electronic keyboard or damaging the internal parts please do not place the electronic keyboard in a dusty environment, in direct sunlight or in places where there are very high or very low temperatures.
• Do not place the electronic keyboard on an uneven surface. To avoid damaging internal parts do not place any vessel holding liquid onto the electronic keyboard as spillage may occur.

Maintenance:

• To clean the body of the electronic keyboard wipe it with a dry, soft cloth only.

Connection:

• To prevent damage to the speaker of the electronic keyboard please adjust the volume of any peripheral device to the lowest setting and gradually adjust the volume accordingly to an appropriate level once the music is playing.

During operation:

• Do not use the keyboard at the loudest volume level for a long period.
• Do not place heavy objects onto the keyboard or press the keyboard with undue force.
• The packaging should be opened by a responsible adult only and any plastic packaging should be stored or disposed of appropriately.

Specification

• Specifications are subject to change without notice.

Controls, Indicators and External Connections

Front Panel

A diagram shows the front panel of the RJ5061 keyboard with numbered controls. Key controls include:

• 1. Stereo Speakers
• 2. Power Switch
• 3. Sync
• 4. Single Finger Chords
• 5. Fingered Chords
• 6. Chord Tone
• 7. Split Keyboard
• 8. Fill In
• 9. Main Volume +/-
• 10. Accompaniment Volume +/-
• 11. Transpose +/-
• 12. Tempo [Fast/Slow]
• 13. Intro/Ending
• 14. Memory
• 15. Memory Storage 1
• 16. Memory Storage 2
• 17. Play/Pause
• 18. Previous Track
• 19. Next Track
• 20. Music Volume -
• 21. Music Volume +
• 22. Start/Stop
• 23. Metronome
• 24. Vibrato
• 25. Sustain
• 26. Teach 1
• 27. Teach 2
• 28. Teach 3
• 29. Number Buttons
• 30. Demo
• 31. Program
• 32. Rhythms
• 33. Playback
• 34. Tones
• 35. Record
• 36. Keyboard Playing Area
• 37. Chord Keyboard Area
• 38. Pitch Wheel
• 39. Tones List
• 40. LED Screen
• 41. Rhythms List

External Connections

A diagram shows the rear panel connections:

• 1. USB Input (For MP3 Playback)
• 2. AUX IN (For Music Playback)
• 3. MIC Input (For Electret Microphone)
• 4. Headphone Output
• 5. DC 9V Power Input

LED Display

The LED display is a 3-Digit display.

Preparation Before First Use

Stand Assembly

Please first assemble the stand using the screws and allen key supplied. The keyboard can then be secured to the stand using the straps and screws connected to the top bars.

Diagrams illustrate the stand assembly process using numbered parts: 1 x STAND FRAME, 2 x BOTTOM FEET, 2 x TOP BARS, 1 x ALLEN KEY, 4 x SCREWS.

Power

Use of AC/DC power adapter:

Please use the AC/DC power adapter that came with the electronic keyboard or a power adapter with DC 9V output voltage and 500mA output current with a centre positive plug. Connect the DC plug of the power adapter into the DC 9V power socket on the rear of the keyboard and then connect the other end into the mains wall socket and switch on.

Diagrams show the power connection for USA/Canada and UK.

Caution: When the keyboard is not in use you should unplug the power adapter from the mains power socket.

Battery operation:

Open the battery lid on the underneath of the electronic keyboard and insert 6 x 1.5V Size AA alkaline batteries. Ensure the batteries are inserted with the correct polarity and replace the battery lid.

Caution: Do not mix old and new batteries. Do not leave batteries in the keyboard if the keyboard is not going to be used for any length of time. This will avoid possible damage caused by leaking batteries.

Auto power off:

The keyboard has a power save function that switches the keyboard off after a period of around 4 to 5 minutes when not being played. Press the power on / off button to switch back on.

Jacks and Accessories

Using headphones:

Connect the 3.5mm headphone plug into the [PHONES] jack on the rear of the keyboard. The internal speaker will cut off automatically once headphones are connected.

Diagram shows headphones connected to the keyboard's PHONES jack.

Connecting an Amplifier or Hi-Fi Equipment:

This electronic keyboard has a built-in speaker system but it can be connected to an external amplifier or other hi-fi equipment. First turn off the power to the keyboard and any external equipment you are looking to connect. Next insert one end of a stereo audio cable (not included) into the LINE IN or AUX IN socket on the external equipment and connect the other end into the [PHONES] jack on the rear of the electronic keyboard.

Diagram shows connection to an amplifier.

Connecting a phone or audio device to the AUX Input to play music through the keyboard:

This keyboard has a built-in speaker system that can be used to play music from your phone or mobile device. Insert one end of a stereo audio cable into the AUX IN socket on the back of the keyboard and connect the other end into your phone or audio device. Make sure the keyboard is switched on. Use the volume control of the phone to control the music volume. AUX in cable not included.

Diagram shows a phone connected to the keyboard's AUX IN jack.

Connecting a Microphone:

Connect the 3.5mm microphone plug into the [MIC] jack on the rear of the keyboard. Note that the keyboard requires an electret or condenser microphone, not supplied.

Diagram shows a microphone connected to the keyboard's MIC jack.

Playing MP3 Music Files from a USB Memory Stick:

Insert the USB memory stick into the USB input at the rear of the keyboard. Press the PLAY/PAUSE key to start and stop the music playback. Once the music has started playing you can skip forward and backward through the MP3 tracks by pressing the control buttons. Adjust the volume of the music playback with the VOL – and + keys. Use the keys on the keyboard to play along.

Diagram shows USB connection and playback controls.

Keyboard Operation

Power and Volume

Power control:

Press the [POWER] button to turn the power on and again to turn the power off. The LED display will light to indicate power on.

Diagram shows finger pressing the power button.

Adjustment of the Master Volume:

The keyboard has 16 levels of volume from V00(off) - V15. To change the volume, press the [VOLUME ▲ /▼ ] buttons. The volume level is indicated by the LED display. Pressing both the [VOLUME ▲ /▼ ] buttons at the same time will make the Main Volume return to the default level (level V10). The main volume level will revert to level V10 after power off and on.

Diagram shows volume control buttons.

Tone

Tone Selection:

When the keyboard is switched on the default TONE is 't00” Grand Piano. To change the tone, press the [TONE] button first and then directly input the number code on the keypad by pressing the corresponding digits 0-9. The tones can also be changed by using the + / - buttons. Refer to Appendix III for a list of the available tones.

Diagram shows the TONE button and numerical keypad.

Effect & Control

Split Keyboard:

To switch on Split Keyboard mode press the [SPLIT] button, the LED will show [SPL]. The keyboard will split into two keyboards at the 24th key from the left. You can adjust the TONE of the right hand side of the keyboard by pressing the corresponding digits 0-9 on the numerical keypad. The TONE of the left hand side of the keyboard will remain set to the tone chosen before the Split Keyboard mode was entered. In Split Keyboard mode the pitch of the left hand keys are raised by one octave and the right hand keys lowered by one octave. Press the [SPLIT] button again to exit Split Keyboard mode.

Diagram illustrates the split keyboard function.

Sustain:

Press the [SUSTAIN] button to enter Sustain mode. The LED display will briefly display [SUS] to indicate sustain is on. Once this mode is selected the sound of each note played is prolonged. Pressing the [SUSTAIN] button again will turn the sustain feature off and exit this mode.

Diagram shows finger pressing the SUSTAIN button.

Vibrato:

Press the [VIBRATO] button to enter Vibrato mode. The LED display will briefly display [Vib] to indicate that vibrato is on. Once this mode is selected each time a note is played a trembling effect is added to the note. Pressing the [VIBRATO] button again will turn the Vibrato feature off and exit this mode.

Diagram shows finger pressing the VIBRATO button.

Transpose:

Pressing the [TRANSPOSE ▲ /▼ ] buttons alters the musical scale of the note being played. You can adjust the scale by 6 levels upwards or downwards. Pressing both the [TRANSPOSE ▲ /▼ ] buttons at the same time will make the musical scale revert to 00. The transpose level will be reset to 00 after power off and on.

Diagram shows transpose buttons.

Metronome:

Press the [METRONOME] button to start the tick-tock beat. There are four beats to choose from. Depending on what the performance needs, you can press the [TEMPO ▲ /▼ ] buttons to speed up or slow down. Press the [METRONOME] button repeatedly to cycle through to the required beat pattern. The LED display will indicate the beat you have chosen. The metronome effect is added to the music once you start playing. To exit this mode press the [START/STOP] or [METRONOME] button again.

Diagram shows metronome related buttons.

Panel Percussion Instruments:

To access the Percussion sounds, press the [TONE] button first and then select tone number 128 on the keypad. Once the tone has been selected the keyboard's keys turn into percussion instruments and play the percussion sounds accordingly. Refer to Appendix I. for a table showing the percussion sounds available.

Diagram shows the TONE button, keypad, and percussion keyboard area.

Using the Pitch Wheel:

Use the Pitch bend wheel to adjust the pitch of a note up or down for a continuous pitch variation between notes. This feature can help recreate an authentic playing sound for sounds such as strings and trombone where the original instrument can slide up between notes. It is also a common tool used for synthesiser compositions.

Diagram shows finger using the pitch wheel.

Rhythm

Selecting the rhythm:

You can choose from any of the 200 built-in rhythms. Please refer to Appendix II. for the detailed rhythm table. Press the [RHY] button to enter the rhythm selection function. The LED display will show the current rhythm number. You can select the rhythm you require by pressing the corresponding digits on the numerical keypad or by pressing the + / - buttons.

Diagram shows RHY button and keypad.

Start / Stop:

Press the [START / STOP] button to play the rhythm selected. Press the [START / STOP] button again to stop the rhythm playback.

Diagram shows START/STOP button.

Sync:

Press the [SYNC] button to select the sync accompaniment function. Pressing any of the first 19 keys on the left hand side of the keyboard will start the rhythm playing. Press the [START / STOP] button to stop the rhythm and exit the sync function.

Diagram shows SYNC button and chord area.

Fill in:

You can fill in a length of interlude if you press the [FILL IN] button during the rhythm playback. After the fill in, the rhythm will continue playing as normal.

Diagram shows FILL IN button.

Accompaniment Volume Adjustment:

The Accompaniment Volume can be adjusted by pressing the [ACCOMP VOLUME ▲ /▼ ] buttons. The LED display will show the volume as you are adjusting it. The adjustment range has 16 levels which are displayed as 000 – 015 and indicated by the LED display. Pressing both the [ACCOMP VOLUME ▲ /▼ ] buttons at the same time will make the Accompaniment Volume return to the default level (level 010). The Main Volume control will also affect the output level of the accompaniment. At power on the accompaniment volume will reset to the default level.

Diagram shows ACCOMP VOLUME buttons.

Tempo Adjustment:

Pres and hold the [TEMPO ▲ /▼ ] buttons to adjust the playing tempo of the rhythm, metronome and demo song. The adjustment range is 30-240 bpm. Pressing both the [TEMPO ▲ /▼ ] buttons at the same time will make the tempo revert to the default tempo for the rhythm selected. At power on the tempo will revert to 120 bpm.

Diagram shows TEMPO buttons.

Chord Accompaniment

Single Finger Chords:

Press the [SINGLE] button to activate the single finger chord function. The LED screen will display [C-1]. Chords are played by pressing certain keys in the chord area on the left hand side of the keyboard (keys 1-19). The finger patterns required are shown in Appendix VI. Press the [START / STOP] button to start or stop the chord accompaniment. Press the [SINGLE] button again to exit single finger chord mode.

Diagram shows SINGLE button and chord area.

Fingered Chords:

Press the [FINGERED] button to activate the fingered chord function. The LED screen will display [C-2]. Chords are played by pressing certain keys in the chord area on the left hand side of the keyboard (keys 1-19). The finger patterns required are shown in Appendix VI. Press the [START / STOP] button to start or stop the chord accompaniment. Press the [FINGERED] button again to exit fingered chord mode. Note that no sound will be produced unless the correct finger patterns are formed.

Diagram shows FINGERED button.

Chord Tone:

In either fingered or single finger chord mode, press the [CHORD TONE] button repeatedly to select the desired chord tone. There are 7 chord tones to choose from, indicated on the LCD as [00] to [06]. The chord tone is reset to [00] after power off / on.

Diagram shows CHORD TONE button.

Intro / Ending

Press the [INTRO / END] button to enable the intro section, the display will show [int]. When the intro finishes playing, accompaniment shifts to the main section. Press [INTRO / END] button again to enable the ending section, the display will show [End]. When the ending is finished, the auto accompaniment stops automatically.

Diagram shows INTRO/END button.

Recording Function

Press the [REC] button to enter the recording mode. The LED will indicate that the recording function is on by showing [rEC] on the LED display. Press any key to start recording. The maximum recording capacity is 46 notes. When the recording capacity is full the LED display will show [FUL]. Each time you press the [REC] button, the previous memory will be cleared and the keyboard will enter the recording mode again.

Press the [PLAY] button to play back the recorded notes.

Diagram shows REC and PLAY buttons.

Rhythm Programming

Press the [PROG] button to activate the Rhythm Program mode. The LED will indicate that the rhythm program function is on by showing [Pr9]. You can then play the keyboard and record your percussion track (up to 46 percussion beats). To listen to your piece press the [PLAY] button and the keyboard will playback your edited percussions. You can then play along to your recorded percussion. You can also adjust the speed of the playback using the [TEMPO ▲ /▼ ] buttons. To cancel the Programming mode, press the [PROG] button again.

Diagram shows PROG and PLAY buttons.

Demo Songs

Press the [DEMO] button to play a demo song. The LED display will show [dXX] where XX is the number of the demo song, from 00 to 39. By pressing the + and - button on the numerical keypad you can choose the demo song you require. There are 40 demo songs to choose from in total. The keyboard will finish the chosen song and then play the next song. Press the [DEMO] button again to exit the demo mode. Refer to Appendix IV. for a list of the available Demo songs.

Diagram shows DEMO button and keypad.

Setting Memories M1 and M2

The keyboard has two built-in memories for saving specific tones, rhythms, and tempos. Before performing, select the TONE, RHYTHM and TEMPO you wish to use. While holding the [MEM] button, press the [M1] or [M2] button to store the settings, the LED display will show [S1] or [S2] and this will save the keyboard settings to that memory. You can access the stored settings by pressing the [M1] or [M2] buttons before performing, the LED display will show [n1] or [n2].

Note that the M1 and M2 memories will be cleared after the keyboard is switched off and back on again.

Diagram shows MEM, M1, and M2 buttons.

Teaching Modes

Beginner Course:

Press the [TEACH 1] button to enter the Beginner Course teaching mode. This mode is suitable for beginners to familiarise themselves with the rhythm and tempo of the song. The LED display will show [dXX] where XX is the number of the song selected, from 00 to 39 (refer to Appendix IV for the list of songs). Use the keypad or + - keys to select the desired song. The beat point will flash on the LED display to indicate the tempo. The LED display will indicate which key should be pressed, for example C 6. Use the key stickers provided with the keyboard applied to the keys in order to know which key to press. The keyboard will play the main melody in time with any key presses, even incorrect ones.

Diagram shows TEACH 1 button and keyboard with highlighted keys.

Intermediate Course:

Press the [TEACH 2] button to enter the Intermediate Course teaching mode. This mode is suitable for intermediate users. The LED display will show [d00] where XX is the number of the song selected, from 00 to 39 (refer to Appendix IV for the list of songs). Use the keypad or + - keys to select the desired song. The beat point will flash on the LED display to indicate the tempo. The LED display will indicate which key should be pressed, for example C 6. Once the correct key has been pressed it will then move onto the next section of the song. Use the key stickers provided with the keyboard applied to the keys in order to know which key to press.

Advanced Course:

Press the [TEACH 3] button to enter the advanced Course teaching mode. This mode is suitable for more advanced users. The LED display will show [d00] where XX is the number of the song selected, from 00 to 39 (refer to Appendix IV for the list of songs). Use the keypad or + - keys to select the desired song. The beat point will flash on the LED display to indicate the tempo. The LED display will show which key should be pressed, for example C 6. Use the key stickers provided and press the specified keys as the main melody plays. Note that the song will carry on playing even if an incorrect key is pressed.

Progressive Learning:

• In general, follow the sequence below to master any of the included songs.
• Listen to the song in DEMO mode to get an idea of the note timings and beat. When confident move on to the next stage.
• Access the same song in Beginner Course mode (TEACH 1) and duplicate the note timings and key presses. When mastered move onto the Intermediate Course (TEACH 2) and then the Advanced course (TEACH 3).

Appendix I. Percussion Instruments

Diagram shows the PERCUSSION KEYBOARD AREA with numbered keys.

61 Percussion Sounds

A table lists percussion sounds corresponding to keyboard keys, e.g., C2, C#2, D2, etc., with accompanying icons.

Appendix II. Rhythm Table

A table lists 34 rhythms with their corresponding numbers, from Mambo (00) to Popular Rhythms (34-199).

Appendix III. Tone Table

A table lists 34 tones with their corresponding numbers, from Piano (00) to Popular Tones (34-199).

Appendix IV. Demo Song Table

A table lists 40 demo songs with their corresponding numbers, from Lambada (00) to Mozart sonata k 284 (39).

Appendix V. Troubleshooting

Appendix VI. Chord Tables

Single Finger Chords

Diagrams show the correct key presses for various single finger chords (M, m, 7, m7) for different root notes.

Fingered Chords

Diagrams show the correct key presses for various fingered chords (M, m, 7, m7) for different root notes.

Appendix VII. Technical Specification

• Display: LED Display, 3-Digit
• Tone: 200 unique tones
• Rhythm: 200 unique rhythms
• Demo: 40 different demo songs
• Effect and Control: Split keyboard, Sustain, Vibrato, Transpose, Pitch bend
• Chords: Single Finger mode, Fingered mode, 7 Chord tones
• Recording and Programming: 46 Note record memory, Playback, 46 Beat rhythm programming
• Percussion: 12 different instruments
• Accompaniment Control: Start / Stop, Sync, Fill in, Intro/Ending, Tempo
• Intelligent Teaching: Metronome, 3 Teaching modes
• External Jacks: Power input, Headphone output, Microphone Input (Electret), AUX Input, USB MP3 playback
• Diapason (Range of Keyboard): C2- C7 (61 keys)
• Intonation: <3cent
• Weight: 3.2 kg
• Power Adapter: DC9V, 500mA
• Output Power: 2 W x 2
• Accessories included: Power adapter, Sheet music stand, Keyboard stand, Stool, Headphones, User guide, Key stickers

FCC Compliance Statement

FCC Class B Part 15

This device complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer's instructions, may cause interference harmful to radio communications.

There is no guarantee, however, that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio or TV technician for help.

Product Disposal Instructions (European Union)

The symbol shown here and on the product, means that the product is classed as Electrical or Electronic Equipment and should not be disposed with other household or commercial waste at the end of its working life. The Waste Electrical and Electronic Equipment (WEEE) Directive (2012/19/EU) has been put in place to encourage the recycling of products using best available recovery and recycling techniques to minimise the impact on the environment, treat any hazardous substances and avoid the increase of landfill. When you have no further use for this product, please dispose of it using your local authority's recycling processes. For more information please contact your local authority or the retailer where the product was purchased.

PDT Ltd.
Unit 4B, Greengate Industrial Estate, White Moss View, Middleton, Manchester, M24 1UN, United Kingdom - info@pdtuk.com - Copyright PDT Ltd. © 2020