Denon AVR-1612 AV Surround Receiver

Read Before Use

Thank you for purchasing this Denon product. This manual explains the Setup Wizard that you will need to perform directly after removing the product from its packaging, before you start using the product. The Setup Wizard displays easy-to-follow guidance on your television screen, showing you how to connect and configure speakers, various other devices, and network functions for full enjoyment of this unit.

Contents

• Read Before Use
• Accessories
• About this manual
• Cautions on handling
• Preparing the Setup Wizard
• Setup Wizard
• Playback (Basic operation)

About this manual

• Operation buttons: Operations are described based mainly on remote control operation.
• Symbols:
  • ? This symbol indicates a reference page where related information is described.
  • ? This mark indicates the page of the owner's manual on the CD-ROM provided.
  • ? This symbol indicates supplementary information and tips for operations.
  • ? This symbol indicates points to remember for operations or function limitations.
• Illustrations: Note that illustrations are for explanation purposes and may differ from the actual unit.
• About the CD-ROM: Contains the Owner's Manual and Getting Started information. Requires Adobe Reader® for viewing.

Cautions on Handling

• Before turning the power on: Ensure all connections are correct and there are no issues with cables.
• Power standby: Some circuitry is powered even in standby mode. Unplug the power cord when leaving the unit unused for extended periods.
• Condensation: If there's a significant temperature difference, condensation may form, affecting operation. Allow the unit to acclimate for 1-2 hours after turning it off.
• Mobile phones: Using a mobile phone near the unit may cause noise. Move the phone away if this occurs.
• Moving the unit: Turn off power, unplug the cord, and disconnect all system unit cables before moving.
• Care: Wipe with a soft cloth. Avoid harsh chemicals, benzene, paint thinner, or insecticides, as they can cause damage or discoloration.

Safety Precautions

CAUTION: RISK OF ELECTRIC SHOCK DO NOT OPEN

To reduce the risk of electric shock, do not remove the cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.

⚡️ The lightning flash with arrowhead symbol indicates the presence of uninsulated "dangerous voltage" within the product enclosure that may constitute a risk of electric shock.

❗ The exclamation point symbol alerts the user to the presence of important operating and maintenance instructions.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings.
8. Install in accordance with the manufacturer's instructions.
9. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

CAUTION: To completely disconnect this product from the mains, disconnect the plug from the wall socket outlet. The mains plug is used to completely interrupt the power supply to the unit and must be within easy access by the user.

Preparing the Setup Wizard

This section describes how to prepare the Setup Wizard before use.

• Do not plug the power plug of the main unit into the wall socket until these preparations are complete.
• Speaker connections are performed using the Setup Wizard. Do not connect the speakers yet.

What You Need for This Step

• Speaker (sold separately)
• Speaker cable (sold separately) - Prepare enough for the number of speakers you will use.
• Subwoofer (with built-in amplifier) (sold separately)
• Audio cable (sold separately)
• TV (sold separately)
• HDMI cable (sold separately) - Required for the Setup Wizard to display.
• Remote control unit / R6/AA batteries (supplied)
• Setup microphone (DM-A409) (supplied)
• AM loop antenna (supplied)
• FM indoor antenna (supplied)

1. Place and Layout Speakers

Before installing the speakers, connect the speaker cables to the speakers. For details, see the speaker instruction manual.

Connect the speaker cables to the main unit using the Setup Wizard.

When 5.1-channel installed:

• Install the surround speakers in a position 60 to 90 cm higher than ear level.
• Speaker placement: Front speakers (FL, FR), Center speaker (C), Surround speakers (SL, SR), Subwoofer (SW).
• Angles: Front speakers at 22°-30°, Surround speakers at 120°.
• Ensure adequate heat dispersion when installed in an enclosure. Do not place other equipment on the unit.

2. Connect This Unit to the Television

Use an HDMI cable (sold separately). If connected using other cables, the Setup Wizard will not be displayed.

3. Turn on the Television and Select Input

Turn the television power on and switch the video input to the HDMI input for this unit.

4. Insert Batteries into Remote Control

Slide the rear lid, insert batteries as indicated by the marks (+/-), and replace the cover.

Setup Wizard

When preparations are complete, start the Setup Wizard. Use it to perform connections and settings as shown on the screen. You can skip or cancel at each section if necessary.

1. Language Select

   Set the language for the instructions on the television screen. If your language is not available, select "English". These settings can be changed later via the menu.

2. Speaker Connection

   Connect the speakers for surround sound. Note: Connections for speakers other than 5.1 channel speakers cannot be set using the Setup Wizard. If you have a different configuration, select "Others" and then "Skip" to proceed to "Speaker Calibration".

3. Speaker Calibration

   Configure the settings for your speakers and for the optimum surround sound for your room. This typically involves using the setup microphone to measure speaker output and room acoustics.

4. Source Setup

   Set the connecting terminals for each device to be set and connect them. This assigns input sources like BD, DVD, TV, etc.

5. Remote Setup

   Configure the settings so that devices connected to this unit can be operated using the provided remote control.

This completes the Setup Wizard.

Basic Operation

This section explains how to perform simple operations.

Selecting the Input Source

You can select the input source using the "Source Select" menu on the TV screen or directly using the buttons on the main unit or remote control (e.g., SOURCE ▲/▼).

When using an iPod connected directly to the USB port, select "USB/iPod" for the input source.

Adjusting the Master Volume

Use the [Volume Up Button] and [Volume Down Button] on the remote control or the unit to adjust the volume. The adjustable range may differ based on settings.

Turning Off the Sound Temporarily

Press the [Mute Button] on the remote control. The power indicator may flash, and a "MUTE" indicator will appear on the display or TV screen. Pressing the button again or adjusting the volume cancels mute.

Other Operations

Refer to the included CD-ROM (Owner's manual) for details on:

• Playing a Blu-ray Disc player/DVD player
• Playing an iPod®
• Tuning in radio stations
• Playing a USB memory device
• Selecting a listening mode (Surround mode)
• Convenient functions
• Making detailed settings
• Operating connected devices by remote control

Recycling and Environmental Information

This product's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with local recycling regulations.

When discarding the unit, comply with local rules or regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with local regulations concerning battery disposal.

This product and supplied accessories (excluding batteries) comply with the WEEE directive.

D&M Holdings aims to be a paperless company to help preserve the environment. Your cooperation and understanding are appreciated.