Godox WT25R, WT40R, WT60R RGBWW Dive Lights

Safety Instructions and Attentions

Important: This product is professional lighting equipment and should be used by professional lighting engineers or under the guidance of professionals. Always follow basic safety precautions.

• Read and understand the manual before use.
• Professional lighting is prohibited for children. Close supervision is required when children are near.
• This is not an ordinary lighting product; avoid use by individuals with eye damage or sensitive eyes.
• Handle with care when the lamp is on; do not touch high-temperature parts (e.g., LED beads) to avoid burns.
• Never look directly at the lamp beads when the lamp is on. Avoid prolonged exposure to strong light. If eye discomfort occurs, turn off the lamp, suspend use, and seek medical attention.
• If the lamp bead is damaged or deformed by heat, stop use and contact the manufacturer or a qualified service person.
• Operating environment: -10°C to +40°C.
• Do not use damaged equipment or accessories; have them inspected and repaired by professionals.
• If the casing is broken due to dropping, squeezing, or impact, do not use to avoid electric shock.
• Use extension cords with a current rating greater than or equal to the equipment's rating.
• Place power cords properly to avoid damage, tripping, or contact with hot surfaces. Use only certified power cords.
• Unplug equipment from the power outlet before cleaning or repairing. Do not pull the power cord to unplug; hold the plug. Ensure the equipment is connected to a grounded outlet.
• Before storing, ensure the equipment has cooled down completely. Store in a carrying case or a ventilated dry place.
• Do not place near flammable or volatile solvents (e.g., alcohol, gasoline).
• Do not use accessories not recommended by the manufacturer.
• Clean with a dry cloth or soft cloth; do not use a damp cloth.
• Remove the protective cover before use.
• This product complies with RoHS, CE, and FCC certifications.
• Safety instructions are based on strict factory testing. Design and specifications are subject to change without notice. Check the GODOX website for the latest information.
• Built-in Lithium Batteries: Use specified chargers within the correct voltage and temperature range. Do not disassemble, impact, squeeze, or put into fire. If bulging occurs, do not use.
• Battery Powered Products: Do not use unspecified batteries, power sources, or accessories. Keep batteries out of reach of children. Seek immediate medical attention if swallowed. Handle leaks carefully to avoid burns. Do not use deformed or modified batteries. Do not disassemble or modify batteries. Do not heat or solder batteries. Keep away from fire or water. Ensure correct polarity; do not mix old/new or different types of batteries.
• Warranty: One-year warranty period. Consumables (batteries, adapters, power cords) are not covered. Unauthorized repair voids the warranty. Failures due to non-standard operation are not covered.

Warning:

• Do not disassemble. Repairs must be done by an authorized maintenance center.
• Keep out of reach of children.
• Do not use in the presence of flammable gases, chemicals, or other similar materials. Pay attention to relevant warning signs.
• Built-in lithium battery: Do not disassemble, impact, squeeze, or put into fire. If serious bulge occurs, please do not use.
• Do not leave or store the product if the ambient temperature reads over 40°C.
• Please use the proper charger and follow the operation instruction.
• Make sure to seal the charging port with a silicone lid and then close the cover before using underwater.
• Wash with clean water and put in a dry, ventilated place after using in the sea.

Foreword

Thank you for purchasing the Godox RGBWW Dive Light series. These lights feature an IP68 waterproof rating up to 40 meters, ultra-high output power, Bluetooth APP smart control, 13 realistic light effects, and adjustable brightness from 0% to 100%. They are widely used for filling light in diving, underwater photography, underwater recording, underwater light shows, and diving training.

Main Features

• Smart brightness adjustment for high light mode underwater.
• IP68 waterproof rating, workable up to 40m underwater.
• HSI mode offers 36000 colors.
• Color temperature is precisely adjustable from 1800K to 10000K.
• Supports Bluetooth APP remote control (abovewater mode only).
• Smart battery level indication.
• 37 FX modes with freely adjustable brightness.
• RGBW mode allows separate adjustment of red, green, blue, and white LEDs.
• WT25R and WT40R support fast charging via USB Type-C port.

Product Structure

Diagram showing the components of the light body.

Components:

• 1. OLED Panel
• 2. Power Switch
• 3. DIM Button
• 4. + Button
• 5. MOD/Bluetooth Button
• 6. FN Button
• 7. - Button
• 8. Type-C Charging Port (WT25R/WT40R)
• 9. DC Charging Port (WT60R)

Display Interfaces

CCT Mode Display

Interface showing CCT mode settings.

Elements:

• 1. CCT Icon
• 2. Bluetooth Icon (?)
• 3. Underwater Highlight Mode Icon
• 4. Battery Life (remaining time)
• 5. Battery Level (?)
• 6. CCT Value (e.g., 8500K)
• 7. G/M Adjustment (e.g., GM:+50)
• 8. DIM Adjust Ratio (%)
• 9. Over-temperature Alert Icon (?)

HSI Mode Display

Interface showing HSI mode settings.

Elements:

• 1. HSI Icon
• 2. Bluetooth Icon (?)
• 3. Battery Life
• 4. Battery Level (?)
• 5. HUE (e.g., H:104°)
• 6. HUE Range (0°-360°)
• 7. DIM Adjust Ratio (%)
• 8. Saturation (e.g., S:79)
• 9. Saturation Range (0-100)
• 10. Underwater Highlight Mode Icon

RGBW Mode Display

Interface showing RGBW mode settings.

Elements:

• 1. RGBW Icon
• 2. Underwater Highlight Mode Icon
• 3. Battery Life
• 4. Battery Level (?)
• 5. Red Light Icon (e.g., R:255)
• 6. Green Light Icon (e.g., G:255)
• 7. Blue Light Icon (e.g., B:255)
• 8. White Light Icon (e.g., W:255)
• 9. Red Light Range (0-255)
• 10. Green Light Range (0-255)
• 11. Blue Light Range (0-255)
• 12. White Light Range (0-255)
• 13. DIM Adjust Ratio (%)

GEL Mode Display

Interface showing GEL mode settings.

Elements:

• 1. GEL Icon
• 2. Bluetooth Icon (?)
• 3. Battery Life
• 4. Battery Level (?)
• 5. R-GEL selection
• 6. L-GEL selection
• 7. DIM Adjust Ratio (%)
• 8. Underwater Highlight Mode Icon

FX Mode Display

Interface showing FX mode settings.

Elements:

• 1. FX Icon
• 2. Bluetooth Icon (?)
• 3. Battery Level (?)
• 4. FX No.
• 5. FX Type
• 6. FX Level (e.g., 1: I, 2: 100%)
• 7. Underwater Highlight Mode Icon
• 8. DIM Adjust Ratio (%)

Operation Instructions

1. Power Switch

Long press the power switch for 1 second to power on or off. When the light is on, a short press of the power switch sets brightness to 0%. Press again to resume the previous brightness level.

2. Brightness Adjustment

Short press the DIM button to make the brightness value blink. Use the '+' button to increase brightness by 1 unit (long press for rapid increase). Use the '-' button to decrease brightness by 1 unit (long press for rapid decrease). Short press DIM again to exit, or it will exit automatically after 10 seconds of idle use.

3. Mode Switching

Short press the MOD/Bluetooth button to switch between CCT, HSI, RGBW, GEL, and FX modes.

3.1 CCT Mode

In CCT mode, short press the FN button to choose CCT adjustment or G/M adjustment. Use '+' to increase CCT by 100K or G/M by 1 unit (long press for rapid increase). Use '-' to decrease CCT by 100K or G/M by 1 unit (long press for rapid decrease). CCT range: 1800K-10000K. G/M range: -50 to +50.

3.2 HSI Mode

In HSI mode, short press the FN button to choose HUE or saturation adjustment. Use '+' to increase HUE by 1° or saturation by 1 unit (long press for rapid increase). Use '-' to decrease HUE by 1° or saturation by 1 unit (long press for rapid decrease). HUE range: 0°-360°. Saturation range: 0-100.

3.3 RGBW Mode

In RGBW mode, short press the FN button to choose red, green, blue, or white light adjustment. Use '+' to increase the light value by 1 unit (long press for rapid increase). Use '-' to decrease the light value by 1 unit (long press for rapid decrease). Light value range: 0-255 for each color.

3.4 GEL Mode

In GEL mode, short press the FN button to choose R-GEL or L-GEL. Use '+' to enter the setting interface, then short press FN to select among 20 types for each. Short press again to return to the previous interface.

3.5 FX Mode

In FX mode, short press the FN button to switch light effects. Short press FN twice to return to the previous effect. Use '+' or '-' to adjust the FX level.

Table showing FX scenes, icons, and display settings.

4. Mode Description

The light operates in two main modes: Abovewater Mode and Underwater Highlight Mode (indicated on the panel).

5. Calibrating Function

Use this function if there are abnormalities switching between abovewater and underwater modes. To enter calibrating mode, long press the MOD button and '-' button simultaneously when the light is dry and in abovewater mode. The screen will display "Calibrating".

Status Indicators:

• Calibrating: Calibration in progress.
• DONE (with ✔): Calibration completed successfully.
• Failed (with ❌): Calibration failed; re-calibrate.

6. Bluetooth Setting

Long press the MOD/Bluetooth button to enter Bluetooth settings. Short press FN to choose Bluetooth switch (ON/OFF) or Bluetooth reset. Use '+' or '-' to toggle Bluetooth ON/OFF or perform a reset. "Reset" on the display indicates resetting is in progress, after which it returns to the Bluetooth setting interface.

7. Abnormal Charging Alert

An icon (e.g., ⚠️ or ? with an alert symbol) on the display indicates potential battery abnormality, charger abnormality, or other issues. This alert can appear in power-on or power-off status.

Item List

Note: Due to continuous updates and upgrades, actual products may differ slightly from the illustrations.

Separately Sold Accessories

Light Clamp WT-C01

Technical Data

Specification and data may subject to changes without notice.

Regulatory Information

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement and can be used in portable exposure condition without restriction.

IC Warning

This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) Ce dispositif ne peut causer d'interférences; et (2) Ce dispositif doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil. Ce matériel est complété par une exposition de rayonnements IC pour un environnement naturel. Ce matériel doit être installé et se faire avec une distance minimale de 20cm entre les radiateurs et les autres corps.

Declaration of Conformity

GODOX Photo Equipment Co., Ltd. hereby declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states. For more information of DoC, please click this web link: https://www.godox.com/eu-declaration-of-conformity/. The device complies with RF specifications when the device used at 0mm from your body.

Operating frequency: 2402MHz - 2480MHz

WT25R Maximum EIRP Power: 6.57dBm

WT40R Maximum EIRP Power: 6.90dBm

WT60R Maximum EIRP Power: 5.41dBm

Warranty Information

This warranty card is an important certificate for maintenance service. Please fill in the form in coordination with the seller and keep it safe.

Warranty Period

The warranty period for products and accessories is implemented according to the relevant Product Maintenance Information. The warranty period is calculated from the purchase date.

Product Maintenance Information

How to Get Maintenance Service

Contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service. Provide a valid warranty card for service. If you cannot provide a valid card, service may be offered upon confirmation that the product is within the scope of warranty, but this is not an obligation.

Inapplicable Cases

The guarantee and service are not applicable in the following cases:

• Expired warranty period.
• Breakage or damage caused by inappropriate usage, maintenance, preservation, improper packing, dropping, squeezing, contact with extreme temperatures, solvents, acids, bases, flooding, or damp environments.
• Breakage or damage caused by non-authorized institutions or staff during installation, maintenance, alteration, or addition.
• Original identifying information modified, altered, or removed.
• No valid warranty card.
• Breakage or damage caused by using illegally authorized, nonstandard, or non-public released software.
• Breakage or damage caused by force majeure or accident.
• Breakage or damage not attributable to the product itself.

In such cases, seek solutions from responsible parties. Godox assumes no responsibility. Damage caused by parts, accessories, and software beyond the warranty period or scope is not covered. Normal discoloration, abrasion, and consumption are not considered breakage.

Godox After-sale Service Call: +86-755-29609320(8062)