TotalBoat Epoxy Primer Thinner 200 -- Tech Data Sheet

Support Products

Cleanup: N/A

Filter/Strainer: N/A

Product Description

TotalBoat Epoxy Primer Thinner 200 is a solvent formulated to extend and improve the flow of TotalBoat TotalProtect epoxy barrier coat and primer, TotalBoat Aluminum Boat Barrier Coat, and TotalBoat 2-Part Epoxy Primers. Ideal for brush, roller, or spray applications. Epoxy Primer Thinner 200 may also be used to clean painting tools and equipment after application. It is also designed as a solvent wipe prior to applying TotalBoat Inflatable Boat Paint.

Application Methods

Associated TotalBoat Products

TotalBoat TotalProtect, TotalBoat Aluminum Boat Barrier Coat, TotalBoat 2-Part Epoxy Primer systems, TotalBoat Inflatable Boat Paint (surface preparation solvent wipe ONLY).

Note: THIS PRODUCT IS ONLY FOR USE WITH THE PRODUCTS SPECIFIED ON THIS TECH DATA SHEET.

Thinning Epoxy Primers

IMPORTANT: All epoxy-based products for which this product is designed to be a thinner or reducer must go through an induction period prior to adding this product. The induction period is specified on the epoxy-based product, and varies from product to product.

For most products, the maximum amount of Epoxy Primer Thinner 200 that can be added is 10%. Do not add more than 10% unless a product's instructions specify.
Directly before applying product, add TotalBoat Epoxy Primer Thinner 200 to product slowly and carefully to avoid spillage. Mix into product thoroughly until desired viscosity is reached.

Surface Prep Solvent Wipe for Inflatable Boats

TotalBoat Epoxy Primer Thinner 200 is a great solvent wipe for rubberized inflatable materials prior to applying TotalBoat Inflatable Boat Paint for antifouling protection.
Dampen a clean, lint-free cotton rag with Epoxy Primer Thinner 200 and thoroughly wipe the surface that is to be painted. Follow this step immediately by wiping with a dry, clean, lint-free cotton rag.
Apply TotalBoat Inflatable Boat Paint, as directed.

Warnings

RAGS, STEEL WOOL, OR WASTE SOAKED WITH THIS PRODUCT MAY SPONTANEOUSLY CATCH FIRE IF DISCARDED IMPROPERLY. IMMEDIATELY AFTER USE, PLACE RAGS, STEEL WOOL, OR WASTE IN A SEALED, WATER-FILLED METAL CONTAINER.

Notes

TotalBoat Epoxy Primer Thinner 200 is not for use with all TotalBoat products.

Application Data

Application Method	Mix with TotalBoat epoxy primers to reduce viscosity for brush, roller, or spray application. Surface preparation wipe for inflatable boats before applying TotalBoat Inflatable Boat Paint.
Type of Thinner	Brushing, Rolling, Spraying or Cleanup
Mix Percentage	Specific to each product. Do NOT add more than each product specifies.
Pot Life	N/A
Coverage (sq ft/gal)	N/A
Application Temperature/RH	N/A
Creation Date	April 16, 2020

Physical Data

Vehicle Type	N/A
Components	One
Finish	N/A
Storage	Store in a cool, dry area away from flames or heat sources.
Flash Point	45°F
Units	Quart
VOC (g/L)	840

	TotalBoat Wood Sealer: Application and Preparation Guide Comprehensive guide to using TotalBoat Wood Sealer for wood surface preparation and application, including surface preparation for bare wood and previously varnished surfaces, application methods, and safety information.
	TotalBoat Gleam 2.0 Marine Spar Varnish Guide Comprehensive guide to TotalBoat Gleam 2.0 Marine Spar Varnish, covering surface preparation, application methods, gloss vs. satin finishes, and maintenance for optimal results.
	TotalBoat Epoxy Selection Guide A comprehensive guide to selecting the right TotalBoat epoxy resin for various projects, including arts and crafts, clear coats, casting, deep pours, structural applications, stabilization, and marine grades. The guide details kit sizes, mix ratios, uses, working times, cure times, pour depths, and coverage for each product.
	TotalBoat Epoxy Selection Guide: Choose the Right Resin A comprehensive guide to selecting the appropriate TotalBoat epoxy resin for your project, detailing product types, mix ratios, applications, working times, cure times, pour depths, and coverage.
	TotalBoat TableTop Epoxy: Application Guide and Technical Specifications Comprehensive guide to using TotalBoat TableTop Epoxy for durable, high-gloss finishes on bars, tables, and counters. Includes preparation, application, mixing, troubleshooting, and technical data.
	TotalBoat Gelcoat: Application, Properties, and Technical Specifications Comprehensive guide to TotalBoat Gelcoat, covering its properties, available colors, surface preparation, application methods (brush, roll, spray), catalyzing, coloring, and physical data for marine applications.
	TotalBoat Gelcoat - Black: Safety Data Sheet (SDS) \| Product Information Comprehensive Safety Data Sheet (SDS) for TotalBoat Gelcoat - Black (TB-1109), detailing hazards, composition, first aid, handling, storage, exposure limits, and regulatory information. Essential for safe use and compliance.
	TotalBoat Gelcoat (White, Neutral) Safety Data Sheet (SDS) This Safety Data Sheet (SDS) for TotalBoat Gelcoat (White, Neutral) provides comprehensive information on its identification, hazards, composition, safe handling, emergency procedures, and regulatory status, compliant with OSHA and GHS standards.