BT DieselWorks AutoSync G2 Installation Guide

About the AutoSync G2

This installation guide provides detailed instructions for the BT DieselWorks AutoSync G2, a module designed to add enhanced features and comfort to compatible GM late-model vehicles. It covers installation, registration, and operation for models equipped with IO4/IO5/IO6/IOB radios.

The AutoSync G2 is compatible with various GM trucks and SUVs including Silverado, Sierra, Tahoe, Yukon, Suburban, Escalade, Colorado, and Canyon from specific model years. Please verify your vehicle's radio type before proceeding.

Key Features and Functionality

Explore the extensive capabilities of the AutoSync G2, including:

• Rear camera integration, work lights, and strobe light modes.
• Live powertrain data (boost, EGT, fuel pressure, etc.) and vehicle dynamics monitoring.
• Advanced functions like High Idle, Diagnostic Trouble Code (DTC) reading/clearing, and ECM tune switching for diesel vehicles.
• Vehicle setup options: keyfob learning, TPMS adjustments, OnStar/DEF resets, DPF regeneration, and transmission learning.
• Configuration for WiFi connectivity, camera settings, SecurIdle, and more.

The guide also details firmware updates, including automatic OTA and manual offboard procedures, and specific notes for 2017+ vehicle models.

Resources

For further assistance and related products, refer to the following resources:

• 2017+ SDGM Bypass Harness
• Tailgate Wiring Mod Video
• Reverse Camera Adapter Harness
• 2017+ BCM Unlock License
• AutoSync DSP/SOTF Signal Wire
• DSP/SOTF Switch Installation Guide
• AutoSync Registration & Firmware Server

Thoroughly reviewing this guide is recommended for optimal installation and feature utilization.