WAFERLOCK | A Leading-brand of Smart Locks from Taiwan
Instruction Manual for WAFERLOCK models including: L310 Smart Bluetooth Lever Lock, L310, Smart Bluetooth Lever Lock, Bluetooth Lever Lock, Lever Lock, Lock
WAFERLOCK Smart Bluetooth Lever Lock – L310, ANSI Grade 1, Right-Handed. Perfect for Interior, Offices Doors, Utilities Rooms
1. Insert batteries and slide the battery cover properly as the photo. 2. Tighten the M3 screw. L310 Installation Manual www.waferlock.com. 15. 19. 4 PIN. 4 PIN.
L310 Installation Manual (PDF) WAFERLOCK WAFERLOCK Smart,Bluetooth,Lever,Lock,–,L310,ANSI,Grade,1,Right-Handed.,Perfect,for,Interior,Offices,Doors,Utilities,Rooms,1,13/16"-2",(45.5-50mm),Right-Handed,Nickel,B0B49RJ4ZZ,B0CGHM3Q1B,B09JK8W5V2,B0CGHZDNDW
File Info : application/pdf, 2 Pages, 266.35KB
DocumentDocument2 Inside Assembly L310 Parts List www.waferlock.com 1 Outside Assembly with lever 3 Inner Lever 8 M3 Screws (Black)X3 13 Keys 4 Backplate 5 Rubber GasketX1 9 M3 Screw 14 Inner Lever Handle Set 6 Strike 7 Latch 10 Mounting Screws 11 Fixing Screws for Latch SetX2 12 Fixing Screws for Strike PlateX 2 15 Dismantling Lever/ Door Thickness Adjusting Tool 16 Battery(AAA) L310 Installation Manual retractor www.waferlock.com latch 12 12 4 PIN lock body view from inside of door 4 PIN 2 PIN 2 PIN 15 4 PIN 2 PIN 1. Install latch. The bevel must face toward the door stop. 2. Place outside assembly on rubber gasket. 9V battery contact 1. Attach the outside assembly to the door. Allow the cables hang through the hole on the other side. 2. Insert the outside assembly into door and be sure to properly engage the lock body with the latch by turning the spindle. 1. Take the backplate, gently thread the cables from the outside assembly through the hole located near the latch in the backplate. notch 10 4 PIN 2 PIN 10 1. Place the inner lever set over spindle on the door with the embossed "arrow" to face the latch direction. 2. Tap the cables down the notch of the inner lever handle set to be sure the housing will not pinch or cut before fastening bolts. IMPORTANT The cables must come through notch and lie within the notch without pinched or cut. 1. Well connect the cables to the connectors of inside assembly. IMPORTANT The cables must not be pinched or cut during the process. 19 1. Install insdie assembly and tighten the fixing screw from the bottom. 8 8 8 1. Tighten the fixing screws at the battery box of the inner unit. 1. Install the inner lever and make sure the lever is fixed on the lever handle set. * To remove the lever, utilize the dismantling Lever tool. Insert it into the lever hole and simultaneously pull the lever. 1. Insert batteries and slide the battery cover properly as the photo. 2. Tighten the M3 screw. V02