Quick Start Guide
Ceiling Mount Bracket for Vandal Dome, Vandal Ball, and Vandal Fisheye Cameras
Models: DWC-VACM, DWC-VFCMW, DWC-VFZCM
What's in the Box
| Item | Description / Quantity | Visual Representation |
|---|---|---|
| Camera Mounting Screws | 4 screws | [Mounting Screws] |
| Mounting Pad | 1 pad | [Mounting Pad] |
| Screws and Plastic Anchors | 4 screws and anchors | [Screws and Anchors] |
| Mounting Template | 1 template | [Mounting Template] |
| Hexagonal Wrench | 1 wrench | [Hexagonal Wrench] |
| Quick Setup Guide | 1 guide | [Quick Setup Guide] |
NOTE: Download all your support materials and tools in one place.
- Go to: http://www.digital-watchdog.com/resources
- Search your product by entering the part number in the 'Search by Product' search bar. Results for applicable part numbers will populate automatically based on the part number you enter.
- Click 'Search'. All supported materials, including manuals and quick start guides (QSGs) will appear in the results.
Installation
A white, dome-shaped ceiling mount bracket designed for surveillance cameras.
- Using the mounting template or the mounting bracket itself, mark and drill the necessary holes on the mounting surface.
- Secure the mounting bracket to the mounting surface using the screws and anchors that were included with the mount. Use the mounting pad between the bracket's arm and mounting surface as needed.
- To mount the camera to the mounting accessory, remove the dome from the camera base using the wrench included with the camera.
NOTE: Do not touch the lens when handling the camera.
- Pass wires through and make all necessary connections.
- Secure the camera to the mounting bracket using the included screws. See the table below for the length of the screws and compatible cameras.
Camera Mounting Screw Screw Size Compatible Camera [Screw] M3.0x23.0 V(P)8 vandal dome cameras [Screw] M3.0x20.0 V6 vandal dome cameras and V(P)A vandal ball cameras [Screw] M3.0x12.0 M(P)F and V(P)C vandal dome cameras, P(P)VF vandal fisheye cameras. [Screw] M3.0x8.0 V(P)7 vandal dome cameras. - Adjust the camera's lens position and angle and place the cover dome on the camera base to complete the installation.
The installation involves connecting the camera module and securing the camera dome cover.
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours: 9:00AM - 8:00PM EST, Monday through Friday
Website: digital-watchdog.com
Revision: 08/21
Copyright © Digital Watchdog. All rights reserved. Specifications and pricing are subject to change without notice.
