Juno Pro-Series LED Undercabinet Lighting

Product Description

The Pro-Series LED modular series features an integral electronic driver and operates with 3000K LEDs, offering a maintenance-free 50,000-hour lifespan. It uses 1/6 the energy and produces virtually no heat compared to halogen and xenon fixtures. These fixtures are optimized for fast, permanent installation, mounting flush to the rear backsplash or to the front lip of cabinetry to suit project conditions and homeowner preferences. Pro-Series LED fixtures are environmentally friendly and contain no harmful mercury. A 5-year limited warranty is provided.

Product Specifications

• LEDs: Utilizes warm-white 3000K LEDs, tightly binned to within a 2-step MacAdam ellipse for superb color consistency. Light output is equivalent to Pro-Series Halogen & Pro-Series Xenon fixtures. Provides 50,000-hour service life with a 90 CRI minimum.
• Driver: Integral electronic 120-volt constant current driver, accessible without removing the fixture. Dimmable with most incandescent, magnetic low voltage, or electronic low voltage wall box dimmers. Refer to the compatibility list for compatible dimmers.
• Housing: Slim 1" profile with a modular plug-together design. Features an extruded aluminum housing. Available in designer white, black, brushed bronze, or brushed silver finishes.
• Diffuser: Clear prismatic tempered glass lens for maximum light transmission. It is reverse-angled to minimize perceived brightness.
• Switch: Available with or without a convenient integral On/Off rocker switch.
• Optional Integral Occupancy Sensor: The 22" and 30" models are available with a Passive Infrared (PIR) Occupancy Sensor. The PIR sensor has a field-adjustable time delay settable from 30 seconds to 30 minutes. All additional luminaires connected to the luminaire with an occupancy sensor will be controlled by the single sensor.
• Labels: cULus listed for damp locations.

Installation

The UPLED Series fixtures offer several convenient installation methods and can be installed as direct wire or portable luminaires. Fixtures can be mounted flush to the backsplash or up against the front lip of the cabinetry using captive mounting screws.

• Direct Wire: The UPLED14, UPLED22, and UPLED30 are optimized with a center rear wiring access compartment and push-in electrical connectors for quick electrical connection using non-metallic or armored cable. These models also feature multiple off-center knockouts and are supplied with die-cast fittings for 3/8" flexible metal conduit. Optional direct-wire modules, sold separately, are supplied with a jumper cord to bring power to the fixture, facilitating code-compliant installation at the front end of cabinetry. For direct wiring the UPLED09, a direct wire module must be utilized.
• Portable: To install the UPLED14, UPLED22, or UPLED30 as a portable fixture, use the optional 3-wire grounded cord & plug (U6CP sold separately). Note: The UPLED09 cannot be wired with the U6CP.
• Electrically Connecting Multiple Fixtures: Connect multiple fixtures for up to 5 amps maximum combined operating current. Fixtures can be electrically joined using either the straight joiner connector supplied with each fixture or the optional JC3 jumper cords. Refer to the accessories table for lengths and colors. See the engineering data table for input current draw of each fixture size.

Dimensions

The fixture has a slim 1" profile. The dimensions are approximately 4 1/2" wide and 2" deep. An optional occupancy sensor can be added.

Engineering Data

Pro-Series LED 5 Minute Direct-Wire Installation (for UPLED14, UPLED22 & UPLED30 Only)

1. Attach supply wires to the rear access cover.
2. Connect supply wires to fixture leads using push-in connectors.
3. Mount fixture to cabinet bottom using captive mounting screws.

Ordering Information

Example: UPLED09 30K 90CRI WH NS

¹Occupancy Sensor only available for UPLED22 and UPLED30.

Accessories

Lighting Application Data - Footcandles on Horizontal Work Surface

The diagram shows a fixture mounted under a cabinet, with measurements indicating beam width and distance. The table provides footcandle data (A, B, C, D) for different catalog numbers (UPLED09, UPLED14, UPLED22, UPLED30) at various beam widths. The data is based on 50% of maximum footcandles at the front lip of the cabinet with 80% ceiling and 20% counter surface reflectance.

Dimmer Compatibility

The UPLED series is dimmable with most standard incandescent, magnetic low voltage, or electronic low voltage dimmers. The dimming range depends on the dimmer model. Juno qualified dimmers are listed below. For the UPLED09, it is recommended to combine it on a dimmer with at least one additional luminaire for best dimming performance due to its low wattage.

Incandescent and Magnetic Low Voltage Dimmers

• Lutron® Model Numbers: Glyder® GLV Series*, Diva® DV/DVLV Series, Ariadni® AY Series, Skylark® SELV Series*, Ceana® CNLV Series*
• Leviton® Model Numbers: Trimatron #6681

Electronic Low Voltage Dimmers

• Lutron® Model Numbers: Nova T™ NTELV Series, Diva® DVELV Series, Faedra® FAELV Series*, Nova T™ NTLV Series*, Spacer System® SPSELV Series*
• Leviton® Model Numbers: Illumatech® IPEO4 Series

Note: Dimmers with manual trim adjustment for low end of dimming range are recommended to achieve 5% dimming.

Whole House Integrated Control Systems:

• Schneider Electric C-Bus SLC5504TD4A*
• Lutron® Homeworks® QS HQRD-6NA*
• Lutron® Radio RA2® RRD-6NA*
• Lutron® Radio RA2® RRD-10ND*
• Sensor Switch® nSP5PCD-ELV*
• Sensor Switch® nSP5PCD-2W*

*Juno recommended dimmers.