Amazon Basics Gravity Pet Feeder and Waterer
Welcome Guide
Product Overview
This document provides information for the Amazon Basics Gravity Pet Feeder and Gravity Pet Waterer. These products are designed to automatically dispense food or water to pets, ensuring they are fed or hydrated even when owners are away or have busy schedules.
Intended Use
These products are intended for providing food or water to pets when your schedule does not allow you to be with them at feeding or refilling times. They are ideal for short stays away from home, providing continuous nourishment or hydration for your pet throughout the day.
Before Use
It is recommended to place a protective mat (not provided) around or underneath the product. This will make it easier to clean the area afterwards, especially for the waterer where water might splash or drip.
Cleaning and Maintenance
Clean the product regularly, or at least once a week, with warm soapy water. Avoid contact with corrosive substances such as acids.
Safety and Compliance
- Follow all safety instructions to prevent damage and injury caused by incorrect use.
- Keep the user manual for future reference.
- Do not use the product if it is damaged or defective. Contact Customer Service in such cases.
- Use dry food only for the feeder. Do not use wet, canned, or moist food.
- Do not leave pets unattended for extended periods.
- Dispose of all packaging materials properly and keep them away from children and pets.
- Replace food in the feeder regularly to prevent spoilage.
- To prevent damage to the product and people, do not place it in high-traffic areas where it could cause a trip hazard.
- Do not use the feeder with puppies and kittens that cannot reach into it.
- Do not store foreign objects or liquids in the product (except water for the waterer).
- CAUTION: Some pets may overfeed themselves when an unrestricted supply is made available to them.
Technical Data
| Model Number | Capacity (Volume) |
|---|---|
| B06ZY6Q66G | 13.5 L (456.5 oz) |
| B06ZZC83MG | 4.5 L (152 oz) |
Product Components and Assembly
The product consists of several parts that are assembled to create a functional feeder or waterer.
Feeder Components:
- Lid: The top cover for the food container.
- Container: The main reservoir that holds the dry pet food.
- Feeding Bowl: The base where food is dispensed.
Waterer Components:
- Lid: The top cover for the water container.
- Container: The main reservoir that holds water.
- Cap: Seals the opening of the water container.
- Water Bowl: The base where water is dispensed.
Assembly Instructions:
For the Gravity Pet Feeder:
- Place the base unit on a flat surface.
- Attach the food container (reservoir) to the base unit.
- Fill the food container with dry pet kibble.
- The kibble will gravity-feed into the feeding bowl as it is consumed.
For the Gravity Pet Waterer:
- Fill the water container with fresh water.
- Securely attach the cap to the opening of the water container.
- Invert the filled water container and place it onto the waterer base.
- Water will gravity-feed into the water bowl as it is consumed.
Warranty Information
To obtain a copy of the warranty for this product, please visit:
For warranty service, contact:
- US: +1-866-216-1072
- UK: +44 (0) 800-279-7234
Feedback and Help
AmazonBasics is committed to delivering customer-driven products. Share your experiences by writing a review.
Disposal
Dispose of the product according to applicable statutory regulations. ♻️ [Recycling Symbol]
