Amazon Basics Pet Play Pen

1. Important Safeguards

Read this guide carefully before using the product. It contains important information for your safety, as well as operating and maintenance advice. Keep this guide for future use. Should this product be passed on to a third party, then this guide must be included.

⚠️ WARNING

• Ensure pet pen is properly assembled and all door latches are secure before leaving pet in the pen.
• To prevent choking and other serious injuries, always remove any collars, tags, or leashes from your pet before leaving pet in the pen.

⚠️ CAUTION: This product cannot guarantee full containment and restraint in every circumstance.

When using the product, basic safety precautions should always be followed to reduce the risk of injury, including the following:

• For domestic use only.
• This product must be assembled by an adult.
• Keep children and pets away while assembling the product.
• Do not let children climb on or play with the product.
• Always use the product on a firm, level ground.
• Do not use this product if any parts are missing, damaged, or worn.
• To avoid scratching the floor, assemble the product on a soft surface, such as a carpet.
• Do not over-tighten the fasteners.
• Regularly examine the product for wear and tear. Stop using the product at first sign of damage or if parts become detached.
• Do not use power tools to assemble the product. Power tools may strip or damage the parts.
• Do not hang anything on the product.

2. Before First Use

☠️ DANGER Risk of suffocation!

Keep any packaging materials away from children – these materials are a potential source of danger, e.g. suffocation.

• Remove all the packing materials.
• Remove and review all components before assembly.
• Check the product for transport damages.

3. Cleaning and Maintenance

3.1 Cleaning

To clean the product, wipe with a soft, slightly damp cloth.

Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.

3.2 Storage

• Check the components regularly to make sure all screws and bolts are tightened.
• Store in a cool and dry place away from children and pets, ideally in original packaging.

4. Disposal

Dispose of the product according to local regulations. If in doubt, consult your local authorities.

♻️ [Recycle Symbol]

5. Feedback and Help

We would love to hear your feedback. To ensure we are providing the best customer experience possible, please consider writing a customer review.

Scan QR Code below with your phone camera or QR reader:

amazon.com/review/review-your-purchases#

If you need help with your Amazon Basics product, please use the website or number below.

amazon.com/gp/help/customer/contact-us

+1 877-485-0385

6. Delivery Content

An illustration of the Amazon Basics Pet Play Pen, an octagonal structure made of wire mesh panels.

The package contains the following components:

• Component A: Wire mesh panel (x 1)
• Component B: Metal stake (x 8)
• Component C: Lobster claw clasp (x 4)
• Component D: Corner connector piece (x 8)
• Component E: Base connector piece (x 4)

7. Assembly Instructions

Step 1: Prepare the Panels

Illustration showing a single panel (A) with an arrow indicating 'This side up!' / 'Ce côté en haut!' / '¡Este lado arriba!'. The panel is shown partially unfolded.

Step 2: Form the Enclosure

Diagram showing multiple panels (A) being connected to form a larger enclosure, likely an octagon or similar shape. Arrows indicate the connection points.

Step 3: Connect Panels

Close-up illustration of the connection mechanism between two wire mesh panels (A). Multiple clips are shown being inserted to join the panels. Arrows indicate the direction of connection.

Step 4: Secure the Door

Close-up illustration of the door latch mechanism on one of the panels. The text 'NOTICE: Ensure the door is properly locked.' is displayed, along with French and Spanish equivalents.

Step 5: Outdoor Installation

Illustration showing the pet pen assembled into a large octagonal shape. A close-up inset shows a stake (B) being inserted into the ground at the base of a panel. Text indicates that for outdoor installation, stakes (B) should be used to secure the pen to the ground with a rubber mallet.

Step 6: Connecting to Other Cages

The product can be connected to a pet cage or similar products (not included) using the lobster claw clasps (C).

Step 7: Attaching to a Cage

Close-up illustration of lobster claw clasps (C) being used to connect the pet pen to a pet cage (not included). The diagram shows the clasps attaching to the cage structure.

Step 8: Creating Different Shapes

Diagrams illustrating how to assemble the pet pen in different shapes using clips (D/E).

• The first diagram shows connectors D and E, with angles indicated: 180°, 135°, and 90°.
• Subsequent diagrams show how these connectors and clips allow panels to form various shapes, including squares and octagons.