Installation Requirements

Counter

• Width: 18.5 in / 47 cm (foot-to-foot)
• Width: 22.2 in / 56.4 cm (incl. handles)
• Depth: 23 in / 58 cm (foot-to-drip tray)
• Height: 14.5 in / 38.8 cm (incl. handles)
• Weight: 110 lbs / 50 kg (tanks filled)
• Measurements do not include overhanging components: portafilters.

Diagram showing top and side views with dimensions for the Slayer Espresso Single Group. Key dimensions include width (18.5 in / 47 cm, 22.2 in / 56.4 cm), depth (23 in / 58 cm), and height (14.5 in / 38.8 cm). A circular cutout of 3 in / 7.6 cm is indicated on the top view.

Water

• 3/8-inch BSP dedicated cold water line with shutoff valve (in North America, 3/8-inch compression fitting is included)
• Required incoming water pressure: 3 Bar min, 5 Bar max
• Water hardness cannot exceed 50ppm, otherwise a water softener is needed

Power

• Single Phase: 120 volts, 50/60 hz, 12 a, 1.5 kW
• Standard grounded plug end included
• Receptacle: Nema 5-15

OR

• Single Phase: 220-240 volts, 50/60 hz, 9a, 2.1-2.4 kW
• Receptacle: Nema 6-15

Diagram illustrating the rear and side view of the espresso machine, showing power and water connections. It indicates a requirement for a 220V, 10A single-phase male plug end and includes a 110V, 15A male plug end. The water connection shows a 3/8-inch water line connecting to the water system with a shutoff valve and a water filter.

Drain

• Open gravity drain located within 4 feet / 1.2 meters of the machine.
• Ensure drain line is always sloping downwards
• Drain hose: 7/8 inch outside diameter, 5/8 inch inside diameter (2.2 cm outside diameter, 1.6 cm inside diameter).