JENSEN CAR110X 10.1" CAPACITIVE TOUCH SCREEN 1 DIN MEDIA MECHLESS RECEIVER

Safety Notes

Video playback will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash video functions will only operate when the vehicle is in Park and the parking brake is engaged. It is illegal in most jurisdictions for the driver to view video while the vehicle is in motion.

The SAFETY NOTICE is a reminder to drive responsibly and safely while using your mobile phone device, or any APPs that are compatible with this unit.

It is highly recommended that your JENSEN CAR110X is installed by a professional installer or an authorized dealer.

This product is only for use in vehicles with 12VDC negative ground only.

To prevent damage or injury:

• Make sure to ground the unit securely to the vehicle chassis ground.
• Do not remove the top or bottom covers of the unit.
• Do not install the unit in a spot exposed to direct sunlight or excessive heat or the possibility of water splashing.
• Do not subject the unit to excessive shock.
• When replacing a fuse, only use a new one with the correct rating. Using a fuse with the wrong rating may cause the unit to malfunction.
• To prevent short circuits when replacing a fuse, disconnect the wiring harness first.
• Use only the provided hardware and wire harness.
• If you experience problems during installation, consult your nearest JENSEN dealer.
• If the unit malfunctions, reset the unit as described. If the problem still persists, consult your nearest JENSEN dealer or call tech assistance @ 1-888-921-4088.
• To clean the monitor, wipe only with a dry silicone cloth or soft cloth. Do not use a stiff cloth, or solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or remove the printing.
• When the temperature of the unit falls (as in winter), the liquid crystal inside the screen will become darker than usual. Normal brightness will return after the unit has been in use for a while.
• When extending the ignition, battery or ground wiring, make sure to use automotive-grade wiring with a minimum AWG 16 or more to prevent voltage drops.
• Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liquid crystal fluid may be hazardous to your health or fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately.

Copyright Notes

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

SiriusXM and all related marks and logos are trademarks of Sirius XM Radio, Inc. All rights reserved.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc.

Use of the Apple CarPlay logo means that a vehicle user interface meets Apple performance standards. Apple is not responsible for the operation of this vehicle or its compliance with safety and regulatory standards. Please note that use of this product with iPhone, iPod or iPad may affect wireless performance. Apple CarPlay is a trademark of Apple Inc. "Made for iPod" and "Made for iPhone" mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. iPhone and iPod are trademarks of Apple, Inc., registered in the U.S. and other countries.

Availability of Android AutoTM may vary depending upon your country and phone model. Please visit android.com/auto for more information. Android, Android Auto, Google and other marks are trademarks of Google Inc.

Other trademarks and trade names are those of their respective owners.

Warning Statement

Upon installation of this monitor/media player ("unit") into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle's occupants or persons outside the vehicle and/or property damage.

Several states prohibit the installation of monitors/media players if the screen is visible from the driver's seat. If you reside in a jurisdiction which has enacted such a law, this unit must not be installed so that the screen is visible from the driver's seat. When installing this unit in the front console/dashboard, the unit must be positioned so that it is facing the front passenger seat only. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle's occupants or persons outside the vehicle and/or property damage.

This unit is designed so that it may be operated only when the vehicle is in "Park" and the parking brake is fully engaged. To this end, this unit includes a parking brake lock-out feature which prohibits the unit from operating if the vehicle is not in "Park" and/or the parking brake is not fully engaged. When installing this unit, the installer must connect the parking brake detect wire to the parking brake mechanism in order to make the parking brake lock-out feature operable. DO NOT simply ground the parking brake detect wire to a metal portion of the vehicle. Failure to properly install the parking brake lockout feature could lead to driver distraction which could result in serious injury or death to the driver's occupants or persons outside the vehicle and/or property damage.

Once the parking brake lock-out feature is installed, the owner/user must not attempt to disrupt/neutralize the parking brake lock-out feature by (a) partially engaging the parking brake and/or (b) purchasing/using any device or unit designed to send necessary brake signals to the unit. Failure to follow these instructions could lead to driver distraction which could result in serious injury or death to the driver's occupants or persons outside the vehicle and/or property damage.

When operating this unit, keep the unit's volume level low enough so that the vehicle's occupants can hear traffic-related sounds such as police and emergency vehicles. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle's occupants or persons outside the vehicle and/or property damage.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

5G WiFi Frequency: U-NII-1: 5150 MHz to 5250 MHz, U-NII-3: 5725 MHz to 5850 MHz

Preparation

Before You Start

• Disconnect negative battery terminal. Consult a qualified technician for instructions.
• Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.

See the enclosed installation guide for more details.

Mounting Hardware Description

The unit includes mounting hardware for installation. This typically includes screws (e.g., M5.0X6.0MM, M5.0X8.0MM) and potentially a mounting sleeve or bracket. Specific dimensions and quantities are provided in the installation guide.

Screen Rotation

The screen angle can pivot side to side. Screen height adjusts up to 1.5 inches down. Screen depth can be adjusted from 0 inches to 0.5 inches to 1 inch forward. The screen also tilts forward and back.

Wiring Diagram - Inputs/Outputs

Note: For CarPlay and Android Auto only.

The unit features two main wiring harnesses: a 20-pin and an 18-pin connector. The 20-pin harness includes connections for Battery (+), Ignition/ACC (+), Ground (-), Illumination, Reverse (+), SWC Input, and Remote Turn-On (Blue/White wire). The 18-pin harness provides pre-amp audio outputs for Front Left/Right (White/Red RCA), Rear Left/Right (White/Red RCA), and Subwoofer (Blue RCA). It also includes inputs for Camera (Yellow RCA), AV In Left/Right (White/Red RCA), and Video In.

Wiring Notes:

• Subwoofer output: The Subwoofer preamp audio output (Blue jacket with Black RCA) is active in all audio modes.
• Rear camera input: A rear view camera (not included) can be used with the Camera input.
• SiriusXM: For more information on how to install the SiriusXM Connect Vehicle tuner, consult the installation guide included with the tuner (SiriusXM connect tuner and subscription sold separately).

Fuse Information: When replacing a fuse, make sure to use the correct type and amperage. Using an incorrect fuse could cause damage. The unit uses one 15 amp ATC mini style fuse located on the power connector.

Control Locations

The radio display features the following controls:

1. Voice Activation Button: Activates voice assistant (Siri/Google Assistant).
2. Source/Home Button: Switches between audio sources or returns to the main menu.
3. Power/Volume/Mute Button: Press momentarily to turn the unit on/off, rotate to adjust volume, press momentarily to mute/unmute audio.
4. Previous Button: Skips to the previous track or channel.
5. Next Button: Skips to the next track or channel.
6. IR Sensor: Receives signals from the remote control.
7. Reset / USB Port: Used to reset the unit's main processor or connect a USB device.

Remote Control Preparation

The remote control provides access to various functions:

1. Power: Turns the unit on/off.
2. Volume Up: Increases audio volume.
3. Tune/Track Down: Skips to the previous track or channel.
4. Enter: Confirms selections.
5. Mute: Silences audio output.
6. Volume Down: Decreases audio volume.
7. Preset 1~6: Selects preset radio stations or tracks.
8. Repeat: Controls track repeat modes.
9. Play/Pause: Controls media playback.
10. Talk: Initiates or answers calls via Bluetooth.
11. MODE: Switches between audio sources.
12. End Call: Ends or rejects calls via Bluetooth.
13. Random: Controls track shuffle modes.
14. BAND: Selects radio bands (AM/FM).
15. Tune/Track Up: Skips to the next track or channel.
16. Voice Activation Button: Activates voice assistant (Siri/Google Assistant).

General Operation

Power On/Off, Volume, Mute

• Power: Momentarily press the Power/Volume/Mute button to turn the unit on. Press and hold to turn the unit off.
• Volume: Rotate the volume knob to increase or decrease the volume level.
• Mute: Momentarily press the MUTE button to silence the audio. Press MUTE again to return to the previous volume. Rotating the volume knob also cancels mute.

Mode Selection

Press the Source/Home icon (top left corner of the screen) to display the main menu. From the main menu, select the desired source such as Radio, USB, SiriusXM, BT Phone, Android Auto, Apple CarPlay, AV In, BT Audio, Camera, Equalizer, or Settings.

A/V In

Connect external audio/video devices to the rear RCA Type A/V Input.

USB

Insert a USB flash drive to play MP3/FLAC files.

Reset

To resolve abnormal operation or if the unit is inoperable, press the RESET button located behind the front panel, directly under the USB port, using the tip of a pen. This resets the main processor to the default settings or restores factory default software settings.

Setup Menu

From the Main Menu screen, select 'Setup' to access the Settings menu. Adjust options via the touch screen within categories like General, Audio, Display, and Others.

General Settings

• Date and Time: Adjust Day, Month, Year, Hour, Minute, and Format.
• Time Format: Select between 12-Hour and 24-Hour formats.
• Time Zone: Select the appropriate time zone.
• Manual Time Setting: Turn off GPS synchronization to set the time manually.
• Sync GPS Time: Synchronizes the clock time with GPS signals.
• Beep Tone: Turn the beep tone On or Off.
• Language: Select the display language.
• Radio Region: Select the radio region for tuning.
• Right Hand Drive: Toggle between Left Hand Drive (Off) and Right Hand Drive (On) modes. Default is Off (Left Hand Drive).

Audio Settings

• Equalizer: Select from EQ presets (Default, User, Classic, Rock, Jazz, Electric, Pop, Soft) or enter custom EQ settings.
• Time Alignment: Adjust time correction settings by selecting PRESET 1, PRESET 2, or PRESET 3. Measure speaker distances to the desired listening position for accurate settings.
• Loudness: Turn the Loudness function On or Off.
• Subwoofer Control: Turn the Subwoofer Control On/Off.
• Subwoofer Gain: Adjust subwoofer gain from -6 to 6 (0 is default).

Display Settings

• Brightness: Adjust brightness level using '>' or '<' (0 Minimum / 20 Maximum). Default Day: 20, Night: 6.
• Dimmer Mode: Adjust mode (Auto/Day/Night) using '>' or '<'.
• Color Brightness: Adjust color brightness level using '>' or '<' (0 Minimum / 24 Maximum).

Other Settings

• Factory Default: Reset Bluetooth Settings or Reboot System (including SiriusXM™ data reset).
• System Version: Displays the unit's software version.

Audio Operation

Equalizer Menu

Access the Equalizer menu from the Main Menu to adjust Fader, Balance, and Equalizer settings (8-Band Tone Control and 8 Presets).

Time Alignment Menu

The Time Alignment menu allows for sound staging adjustments:

• Surround Presets: Select from preset sound configurations.
• Time Delay Setting: Adjust time delay for each speaker.
• Speaker Positions: Set speaker locations.
• Reset to Default Settings: Revert to factory EQ and time alignment settings.

Adjustment Note: To set time alignment properly, measure the distance from each speaker to the desired listening position (e.g., the driver's seat). Each vehicle will have different distances, requiring unique settings.

AM/FM Tuner Operation

Radio Operation: Touch the Radio icon from the main menu to select AM/FM tuner mode.

• Main Menu Icon: Press to return to the Main Menu screen.
• Current Mode Indicator: Displays tuning status.
• Preset Stations: Store or recall stations by pressing preset numbers. Hold AS/PS to automatically store stations (AS) or scan presets (PS).
• Dimmer: Adjust screen brightness.
• Local / Distance (DX/LOC): Toggle between receiving local or distant stations.
• Keypad: Access direct search keypad for channel entry.
• EQ: Adjust Equalizer settings.
• Seek Tune Up/Down: Automatically tune to higher or lower frequencies.
• AM/FM Band Toggle: Press AM to toggle between AM1 and AM2. Press FM to toggle between FM1, FM2, and FM3.

USB Operation

USB Main Menu: Touch the USB icon from the main menu.

• Return to Main Menu Icon: Press to go back to the main menu.
• Current Mode Indicator: Displays the source currently playing.
• List: Access a list of all files and folders on the USB device. Navigate using up/down arrows and return to the file list with the back arrow.
• Repeat: Cycle through repeat current track, repeat all tracks, or exit repeat mode.
• Random: Shuffle all tracks in the current folder or all tracks. Exit shuffle mode by touching the icon again.
• Search: Search for music files.
• EQ: Adjust Equalizer settings.
• Track Up/Down: Skip to the next or previous song.
• Play/Pause: Pause or resume playback.

Media Compatibility

File Type and System Compatibility

Notes: Due to ongoing technological advancement, some USB flash drives may be incompatible with this unit.

Playback Order and Notes

MP3 playback sequence begins in the root folder. Empty folders or folders without MP3 files are skipped.

Compatible Recording Formats: ISO9660 standards are supported. Maximum nested folder depth is 8. Valid characters for folder/file names are A-Z (all caps), 0-9, and "_". Some characters may not display correctly.

Incompatible Files: MP3 PRO format, MP3 playlists, RMP format, AAC, protected AAC, M4A format.

For best results when ripping MP3 files, use settings of 128kbps or higher constant bit rate and 44.1kHz or higher sampling frequency.

Bluetooth Operation

Pairing a New Device

Before using a Bluetooth device, it must be authenticated (paired). The unit broadcasts the pairing signal when no devices are connected. Complete the pairing sequence from your Bluetooth device. The device name is "CAR110X".

Connect

The head unit can automatically connect to the last connected device if 'Auto connect' is set to 'On'. If set to 'Off', it will not automatically connect.

Bluetooth Phone

Access phone functions from the main menu by touching the Bluetooth icon. The Bluetooth status indicator flashes during pairing and illuminates steadily when a phone is connected.

• Phone Book: Access contacts.
• Call Log: View Dialed, Missed, and Received Calls.
• Call: Dial a number using the keypad or the phone icon.
• Phone Keypad: Use the keypad to dial numbers.
• End Call: End or reject calls using the on-screen icon or the front panel button.

Bluetooth Music

Press "MUSIC" to initiate Bluetooth music playback via A2DP.

Setup

Press "SETUP" to access Bluetooth settings.

Devices

Press "DEVICES" to show the pairing device list. Connect to previously paired devices by selecting their name. Press the current device name to disconnect and connect to a new device.

Microphone

Turn the Microphone voice On or Off.

Audio Transfer Button

Press to transfer audio between the unit and the mobile phone.

Track Navigation and Playback Controls

• Track Down: Return to the beginning of the current track or skip to the previous track.
• Play/Pause: Pause or resume playback.
• Track Up: Skip to the next song.
• EQ: Adjust Equalizer settings.

SiriusXM® Satellite Radio Operation

SiriusXM® Satellite Radio offers over 140 channels. A SiriusXM Vehicle Tuner and Subscription are required. Visit www.siriusxm.com for more information.

Activating SiriusXM® Radio

After installing the tuner and antenna, power on the radio and select SiriusXM mode. Tune to Channel 1 for the preview channel. Tune to Channel 0 to find the Radio ID. Activate online or by calling SiriusXM Listener Care (USA: www.siriusxm.com/activatenow or 1-866-635-2349; Canada: www.siriusxm.ca or 1-877-438-9677). Activation typically takes 10-15 minutes but may take up to one hour.

Accessing SiriusXM®

From the Main Menu, touch the SiriusXM icon.

• Band: Select preset channel bands (SXM1, SXM2, SXM3).
• Program Information: Displays channel name, artist, and song title.
• Search: Enter search mode to find channels by Channel, Artist, Song Title, or Info.
• Category & Channel List: Press to display a list of preset channels in the current band.

Additional Options

Access options like Mode, TuneScan, and Go to Live:

• Mode: Configure Parental Code, Parental Control (Off, Mature, User), Parental Lock Channel, Channel Skipping, and TuneStart™.
• TuneScan™: Plays samples of songs from preset channels. Press again to stop, or press and hold to return to the original channel.
• Go to Live: Resumes live broadcast playback from Replay mode.

Preset Buttons

Press and hold buttons 1-6 to save a station. Press a button to recall the preset channel.

Direct Channel Access

Press 'Direct', enter the channel number, then press 'Enter' to tune directly.

Channel Navigation

• Channel Down: Go to the previous channel.
• Channel Up: Advance to the next channel.
• Tune / Track Down: Enter Replay mode, skip to previous track, or fast reverse.
• Play/Pause: Pause and replay content.
• Tune / Track Up: Skip to the next track or fast forward. Press repeatedly to catch up to live play.

SiriusXM® Radio Advisory Messages

Driving Orientation Settings

To enhance the driving experience, the CAR110X allows configuration for Apple CarPlay™ and Android Auto™ for either Left Hand Drive (LHD) or Right Hand Drive (RHD) vehicles. Select LHD or RHD from the Settings menu. If changing settings while a phone is connected, disconnect and reconnect the phone.

Apple CarPlay Operation

Apple CarPlay™ provides a smart interface for iPhone, allowing voice control (via Siri) for music, navigation, phone, and messaging apps to reduce driver distraction.

• Phone: Use Siri to make calls, check voicemail, and view caller ID.
• Messages: Ask Siri to send, read, and reply to text messages hands-free.
• Music: Access music by artist, song, or playlist via touchscreen or Siri. Displays artist and track information.
• Maps: Use Siri for turn-by-turn directions, searching by address or points of interest. Displays traffic information and estimated time to destination.

Compatible Devices

Compatible iPhone models include iPhone 13 series down to iPhone 6, iPhone 7, iPhone 8, iPhone X, iPhone XS, iPhone XR, iPhone 11, iPhone 12 series.

Starting Apple CarPlay™

Wireless CarPlay Connection:

1. Enter the main UI and click 'BT Phone' to access the Bluetooth interface.
2. Click 'Refresh' to search nearby Bluetooth, then click 'Pair' to match Bluetooth.
3. Open iPhone WLAN and connect to the car. The CarPlay icon will appear upon successful connection.
4. Enter the CarPlay interface and select desired functions (Phone, Music, Map, etc.).

Note: CarPlay features are limited while driving for safety and vary by app. Visit www.apple.com/ios/carplay for more information.

Safety Warning: Be aware of and obey local laws regarding mobile device use while driving. Park the vehicle before using any device functions if unsure.

Controlling Apple CarPlay™

The Home button (lower left) summons Siri when pressed and held, or returns to the main CarPlay menu when pressed momentarily. Basic controls include Touch, Swipe, and Drag.

Exiting Apple CarPlay™

Disconnecting the iPhone exits CarPlay mode. To exit while connected, press the Power/Volume knob momentarily to display the unit's main menu.

Android Auto™ Operation

Android Auto™ brings useful apps to your phone or car display, making it easy to focus on driving. Control navigation, maps, calls, and music.

• Google Assistant: Use voice commands ("Ok Google") or the steering wheel voice control button for hands-free assistance.
• Navigation: Get real-time traffic alerts, avoid hazards, and find the fastest routes.
• Calls & Messages: Use the Assistant to call contacts, read messages aloud, and text back hands-free.

Compatible Devices

Requires the Android Auto app from Google Play on an Android smartphone running Android Lollipop 5.0 or higher.

Warning: Be aware of and obey local laws regarding smartphone use while driving. Only use functions when safe to do so.

Starting Android Auto™

Wireless Android Auto Connection:

1. Enter the main UI and click 'BT Phone' to access the Bluetooth interface.
2. Click 'Refresh' to search nearby Bluetooth. It is recommended to turn on your phone's WLAN before connecting to Bluetooth to avoid connection failure.
3. Click 'Pair' to match Bluetooth. Select your mobile phone when prompted. Android Auto connection is successful.
4. Enter the Android Auto interface and select desired functions (Phone, Music, Map, etc.).

Note: When connected for Android Auto, the device is also connected via Bluetooth. If five devices are paired, you may need to delete a registered device. If Android Auto is turned on during a call on another phone, the Bluetooth connection will switch to the Android Auto compatible device.

Using Android Auto™

The Android Auto™ home screen displays personalized information. Say "OK Google" or select the microphone icon to activate Google Assistant.

• Android Auto Home Button: Returns to the main Android Auto screen.
• Recent Apps: Shows recently used applications.
• Notification Button: Displays notifications.
• Activate Google Assistant™: Accesses Google Assistant.

Exiting Android Auto™

Press the Exit button or disconnect your Android phone to exit Android Auto™ mode.

A/V Input

Connect an optional audio/video source into the rear RCA A/V input. Adjust volume on the external audio source as needed (if connected to the headphone output of the device).

Rear Camera Operation - (Optional)

Using a Rear Camera

Connect an optional rear camera to the Camera Input (Black RCA connector). Refer to the wiring diagram for details.

• Auto Selection: The unit automatically selects camera mode when connected to the reverse lamp circuitry.
• Manual Selection: Touch the CAMERA icon on the Main Menu (when enabled) to select camera mode. Touch the top left area of the screen to return to the Main Menu to turn this feature off. (Note: Manual mode is for dedicated cameras connected to the 12VDC+ ignition wire and always on while driving, not for cameras connected to the vehicle's reverse light.)

SWC Input Operation

The built-in SWC Interface is compatible with 3rd party steering wheel control modules, such as PAC SWI series or Axxess ASWC-1. These adapters must be used for compatibility.

Supported Controls

The following controls are typically available:

• Reset
• Mode
• Seek/Track Up (+)
• Seek/Track Down (-)
• Mute
• Volume Up (+)
• Volume Down (-)
• Band
• BT Talk
• BT End

Note: Not all OE steering wheel functions may be supported. The 3.5mm SWC port is located on the rear of the unit on the MAIN POWER I/O Harness.

Installation Hints

AXXESS ASWC-1: Auto-programming for most vehicles. Refer to AXXESS website for vehicle-specific programming: https://axxessinterfaces.com/product/ASWC-1#vehicle-specific.

PAC SWI-RC: Set the "Radio Select Switch" to position 7 - "Pioneer/Other/Sony". Program using the Pioneer/Sony/Other radio function mapping order for JENSEN units. Skip unsupported functions as per PAC SWI-RC instructions. Program functions in the correct order.

Function Mapping

Troubleshooting

For Your Records

Please keep your original sales receipt and be prepared to provide it for service. Register your product online at www.jensenmobile.com.

Specifications

FM Tuner

Tuning range: 87.5MHz-107.9MHz. Usable sensitivity: 10dBf. 50dB quieting sensitivity: 20dBf. Stereo separation @ 1kHz: 38dB. Frequency response: 30Hz-13kHz.

AM Tuner

Tuning range: 530kHz-1710kHz. Usable sensitivity: 24uV. Frequency response: 30Hz-2.3kHz.

Front USB

Compatibility: High Speed USB 2.0. USB Class: Mass storage class.

Monitor

Panel size: 10.1" diagonal measurement. View angle (up/down/left/right): 50/70/70/70. Resolution: 1024 (H) x 600 (V). Brightness (cd/m2): 500 NITS. Contrast ratio: 500:1. Pixels: 1,152,000.

General

Speaker output impedance: 4 ohms. Line output voltage: 4 volt RMS. Line output impedance: 200 ohms. Chassis dimensions: 7" x 7" x 2" (W x D x H).

CEA-2006 Power Standard Specifications

(Reference: 14.4VDC +/- 0.2V, 20Hz~20kHz) Power Output: 16 Watts RMS x 4 channels at 4 ohms and < 1% THD+N. Signal to Noise Ratio: 80dBA (reference: 1 watt into 4 ohms).

Design and specifications subject to change without notice.

Limited One Year (Or Three Year*) Warranty

This warranty gives you specific legal rights. You may also have other rights which vary from state to state.

Namsung America Inc warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year (or three years*) from the date of the original purchase. Namsung America Inc agrees, at our option, during the warranty period, to repair any defect or furnish an equal new, renewed or comparable product in exchange without charges, subject to verification of the defect and proof of purchase. Subsequent replacement products are warranted for the balance of the original warranty period.

Who is covered?

This warranty is extended to the original retail purchaser for products purchased from an authorized JENSEN dealer and used in the U.S.A.

What is covered?

This warranty covers all defects in material and workmanship. Not covered: software, installation/removal costs, damage from accident, misuse, abuse, neglect, modification, improper installation, incorrect line voltage, unauthorized repair, or damage during return shipment. Software license conditions and copyright notices are available via www.jensenmobile.com.

Warranty Coverage Details

• Limited 1-year warranty when purchased from an authorized Jensen dealer.
• Limited 3-year warranty when purchased from and professionally installed by an authorized Jensen dealer (Proof of purchase and installation required).

What to do?

1. Check the troubleshooting guide before calling for service.
2. If service is required, carefully pack the product (preferably in original packaging) and ship it by prepaid transportation with a copy of the original receipt to an authorized service center.
3. Include a written description of the problem, your name, return UPS shipping address (no P.O. Box), and a daytime phone number.
4. For more information and service center locations, contact: Toll-free at (888) 921-4088 (Monday-Friday, 9:00 a.m. to 5:00 p.m. EST) or E-mail at cs@jensenmobile.com.

Exclusion of Certain Damages

This warranty is exclusive and in lieu of all other warranties, expressed or implied. Namsung America Inc. shall not be liable for indirect, incidental, or consequential damages.