Product Overview
This guide provides detailed instructions for the installation of the ANNFUZ Indicator Lock. This lock is designed for doors with a thickness ranging from 35mm to 45mm (1-3/8" to 1-3/4").
Installation Steps
Step 1: Install the Latch
Adjust the latch as shown and then install it, tightening the screws securely.
Step 2: Install Strikes
Attach the strike plates to the door frame using the supplied screws.
Step 3: Install Exterior Mechanism
Ensure the lock is in the unlocked position, displaying "Vacant" on the indicator. If necessary, reverse the handle L-R by removing it with the included key.
Step 4: Install Interior Part
Install the interior handle, making sure its position is set to "Unlock".
Door Thickness Compatibility
This lock is suitable for door thicknesses between 1-3/8" (35mm) and 2" (50mm).
Installation Template
A template is provided for accurate hole marking and drilling. Follow the steps to fold the template, mark the door edge and face, drill the edge hole, and then drill the main hole for the lock mechanism.
