ASUS ROG Rapture GT-AX6000 Quick Start Guide

Hardware Overview

I/O Ports Overview

Front/Back Panel Ports:

• USB 2.0 Port
• LAN Ports 1-4
• 2.5G/1G WAN Port
• Reset Button
• USB 3.2 Gen 1 Port
• Power Port
• 2.5G/1G LAN Port
• Power Switch

LED Indicators Overview

• Power
• 2.4 GHz
• 5 GHz
• 2.5G LAN
• LAN
• WPS

Specifications

Setup Steps

01 Prepare Your Modem

1. Unplug the modem's power cable or DSL modem. If your modem has a backup battery, remove it. [unplug]
2. Connect your modem to the router's 2.5G/1G WAN port using the provided network cable.
3. Power on the modem. Plug the modem into a power outlet and then turn it on.
4. Check your modem's indicator lights to ensure the connection is established.

02 Install Your Router

1. Connect the AC adapter to the power port (DCIN) and press the power switch. [power symbol] The power LED will light up when the hardware is ready.
2. If you use DSL for internet access, you will need the username and password provided by your Internet Service Provider (ISP) to configure your router.

Setup Method 1: Via the ASUS Router App

1. On iOS or Android, open the app store, search for ASUS Router, and download the app. [App Store logo] [Google Play logo]
2. On iOS or Android, tap Settings > Wi-Fi, then connect to the network named with the default SSID displayed on the label on the back of the router. You can also scan the QR code on the label to connect to the default SSID.
3. Launch the ASUS Router app and follow the instructions to complete the setup.

Network Name (SSID): ASUS_XX
* XX corresponds to the last two digits of the MAC address. You can find these on the label on the back of your router.

Setup Method 2: Via a Web Browser

1. [Wired] Connect your computer to the router's LAN port using an additional network cable.
2. [Wi-Fi] Connect to the network named with the default SSID displayed on the label on the back of the router, 'ASUS_XX'.
3. Open an internet browser. You will be automatically redirected to the ASUS setup wizard. If not, go to http://router.asus.com. Follow the instructions to complete the setup. [welcome symbol]

FAQ

Q1: Where can I find more information about the Wi-Fi router?

• Online FAQ site: https://rog.asus.com/networking/rog-rapture-gt-ax6000-model/helpdesk
• Driver and firmware update site: https://rog.asus.com/networking/rog-rapture-gt-ax6000-model/helpdesk_download
• Customer service: Refer to the Global Call Centers section of this guide.
• Online user manual: https://rog.asus.com/networking/rog-rapture-gt-ax6000-model/helpdesk_manual

Networks Global Hotline Information

NOTES:

• UK support e-mail: network_support_uk@asus.com
• For more information, visit the ASUS support site at: https://www.asus.com/support/

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components, as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for the detailed recycling information in different regions.

REACH

Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Prohibition of Co-location

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

IMPORTANT NOTE:

Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC exposure compliance requirement, please follow operation instruction as documented in this manual. This device is restricted for indoor use.

WARNING! This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Compliance Statement of Innovation, Science and Economic Development Canada (ISED)

This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

CAN ICES-003(B)/NMB-003(B)

Radio Frequency (RF) Exposure Information

The radiated output power of the ASUS Wireless Device is below the Innovation, Science and Economic Development Canada radio frequency exposure limits. The ASUS Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.

This equipment should be installed and operated with a minimum distance of 29cm between the radiator any part of your body.

This device has been certified for use in Canada. Status of the listing in the Innovation, Science and Economic Development Canada's REL (Radio Equipment List) can be found at the following web address: http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html

Additional Canadian information on RF exposure also can be found at the following web: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html

This radio transmitter [3568A-RTAX5600] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.

The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit.

The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate.

For indoor use only.

Safety Notices

• Use this product in environments with ambient temperatures between 0°C (32°F) and 40°C (104°F).
• Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.
• DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.
• DO NOT place or drop objects on top and do not shove any foreign objects into the product.
• DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.
• DO NOT cover the vents on the product to prevent the system from getting overheated.
• DO NOT use damaged power cords, accessories, or other peripherals.
• If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
• DO NOT mount this equipment higher than 2 meters.

All cables used to connect peripherals must be shielded and grounded. Operation with cables connected to peripherals that are not shielded and grounded may result in interference to radio and television reception.