ASUS ROG Rapture GT-AX11000 Pro Quick Start Guide

Router Setup Steps

01 Prepare your Modem

1. Unplug the power of cable / DSL modem.

[Illustration: Modem with power cable unplugged]

2. Connect your modem to the WAN port at the back side of the router with the network cable provided.

[Illustration: Modem connected to router's WAN port with a network cable]

3. Power on the modem. Plug modem to the power outlet and power on.

4. Check the modem LED lights to ensure the connection is active.

[Illustration: Modem front panel with active LED lights]

Note: If you are using DSL for internet, you will need your username / password from your Internet Service Provider (ISP) to properly configure your router.

02 Install your Router

1. Plug the adapter into the DCIN port, and press the Power switch.

2. The power LED will light up when the hardware is ready.

[Illustration: Router back panel showing ports and power switch, and front panel with LEDs]

Via app

1. On your iOS or Android mobile device, go to the app store, search for ASUS Router, and download the app.

[Illustration: App Store and Google Play logos]

2. On your iOS or Android mobile device, tap Settings > WiFi, connect to the default network SSID shown on the product label on the back side of the router. Or scan the QR code on the product label to connect to the default network SSID.

[Illustration: QR code on router label and WiFi settings screen]

3. Launch ASUS Router App and follow the instructions to complete the setup.

[Illustration: ASUS Router App welcome screen]

Or via web browser

[Wired] Connect your PC to a LAN port at the back side of the router using an additional network cable.

[Wireless] Connect to the network with default SSID shown on the product label on the back side of your router "ASUS XX". XX refers to the last two digits of the 2.4GHz MAC address.

[Illustration: PC connected to router via LAN cable, and mobile device connected wirelessly]

Open a web browser. You will be redirected to the ASUS Setup Wizard. If not, navigate to http://router.asus.com.

[Illustration: ASUS Setup Wizard welcome page with options to start setup]

10GE Port WAN Type Setup Steps

01 Set up 10GE WAN connection

Under factory defaults

Connect to the 10GE port

Connect the modem to the 10GE port with a network cable.

[Illustration: Modem connected to the router's 10GE port]

Login and Connect

1. [ASUS Setup Wizard] Select "Manual Setting".

2. [ASUS Setup Wizard] Select "10G Ethernet", then follow the instructions to complete the setup of SSID and login information.

[Illustration: ASUS Setup Wizard screens for Manual Setting and 10G Ethernet configuration]

Switching from 2.5GE WAN to 10GE WAN

If the modem is previously connected to 2.5GE WAN port, remember to switch to 10GE WAN port first.

1. Log in web GUI > open "WAN" setting > "Dual WAN".

2. Choose "10GE WAN" as primary WAN, then apply the setting.

[Illustration: Web GUI showing Dual WAN settings with 10GE WAN selected]

02 Start to Use

After following the setup steps, the router will reboot for a second and start to connect the Internet with 10GE port. The 10GE LED will indicate white light.

[Illustration: Router front panel with 10GE LED showing white light]

FAQ Frequently Asked Questions

Q1: Where can I find more information about the wireless router?

Technical support site: https://www.asus.com/support

Video Tutorials: https://qr.asus.com/wl_videotutorials

Service and Support

ASUS Recycling/Takeback Services: https://csr.asus.com/english/Takeback.htm

REACH: https://csr.asus.com/english/REACH.htm

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment should be installed and operated with a minimum distance of 31cm between the radiator and any part of your body.

Déclaration de conformité de Innovation, Sciences et Développement économique Canada (ISED)

Le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

La bande 5150 - 5250 MHz est réservée uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.

CAN ICES-003(B)/NMB-003(B)

Informations concernant l'exposition aux fréquences radio (RF)

La puissance de sortie émise par cet appareil sans fil est inférieure à la limite d'exposition aux fréquences radio d'Innovation, Sciences et Développement économique du Canada (ISED). Utilisez l'appareil sans fil de façon à minimiser les contacts humains lors d'un fonctionnement normal.

Cet équipement doit être installé et utilisé avec un minimum de 31cm de distance entre la source de rayonnement et votre corps.

L'utilisation de cet appareil est autorisée au Canada. Pour consulter l'entrée correspondant à l'appareil dans la liste d'équipement radio (REL - Radio Equipment List) d'Innovation, Sciences et Développement économique du Canada, rendez-vous sur : http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h tt00020.html

Pour des informations supplémentaires concernant l'exposition aux fréquences radio au Canada, rendez-vous sur : https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html

Safety Notices

WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Prohibition of Co-location

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

IMPORTANT NOTE:

Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC exposure compliance requirement, please follow operation instruction as documented in this manual. This device is restricted for indoor use.

WARNING! This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 62cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

This device is restricted for indoor use.

This device cannot operate as a subordinate between separate buildings or structures.

Compliance Statement of Innovation, Science and Economic Development Canada (ISED)

This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

CAN ICES-003(B)/NMB-003(B)

Radio Frequency (RF) Exposure Information

The radiated output power of the ASUS Wireless Device is below the Innovation, Science and Economic Development Canada radio frequency exposure limits. The ASUS Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.

Use this product in environments with ambient temperatures between 0°C (32°F) and 40°C(104°F).

Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.

DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.

DO NOT place or drop objects on top and do not shove any foreign objects into the product.

DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.

DO NOT cover the vents on the product to prevent the system from getting overheated.

DO NOT use damaged power cords, accessories, or other peripherals.

If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.

To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.

DO NOT mount this equipment higher than 2 meters.

Avertissements de sécurité

Utilisez ce produit dans un environnement dont la température ambiante est comprise entre 0°C (32°F) et 40°C (104°F).

Référez-vous à l'étiquette située au dessous du produit pour vérifier que l'adaptateur secteur répond aux exigences de tension.

NE PAS placer sur une surface irrégulière ou instable. Contactez le service après-vente si le châssis a été endommagé.

NE PAS placer, faire tomber ou insérer d'objets sur/dans le produit.

NE PAS exposer l'appareil à la pluie ou à l'humidité, tenez-le à distance des liquides. NE PAS utiliser le modem lors d'un orage.

NE PAS bloquer les ouvertures destinées à la ventilation du système pour éviter que celui-ci ne surchauffe.

NE PAS utiliser de cordons d'alimentation, d'accessoires ou autres périphériques endommagés.

Si l'adaptateur est endommagé, n'essayez pas de le réparer vous-même. Contactez un technicien électrique qualifié ou votre revendeur.

Pour éviter tout risque de choc électrique, débranchez le câble d'alimentation de la prise électrique avant de toucher au système.

Ne placez pas cet appareil à une hauteur supérieure à 2 mètres.