Home - KOAMTAC
User Guide for KOAMTAC models including: KDC8, KDC8 Data Wedge for Android, Data Wedge for Android, Wedge for Android
di KDCDW Guide · 2025 · Citato da 3 — * Notes. In this guide, we used “Samsung XCover 6 Pro” as Phone A and “Samsung Galaxy A35” as Phone B. Both are Android 14 devices. Page 6. KDC8 Data Wedge ...
Manuals and guides - KOAMTAC
File Info : application/pdf, 14 Pages, 965.14KB
DocumentDocument2 KDC8 Data Wedge Guide for Android Rev 1.00.00 Feb. 2025 KDC8 Data Wedge Guide for Android Table of Contents 1. Introduction ...................................................................................................................... 7 1.1. KTSync ...................................................................................................................................7 2. KDC8 Data Wedge Configuration.................................................................................. 8 2.1. Preparation ...........................................................................................................................8 2.1.1. Bluetooth Pairing ............................................................................................................9 2.1.2. KDC8 Activation............................................................................................................ 10 2.1.3. Scan Destination ........................................................................................................... 10 2.1.4. Show All Bluetooth Device ......................................................................................... 13 3. KDC8 Data Wedge Procedure...................................................................................... 14 3.1. Connection......................................................................................................................... 14 3.2. Scan Barcode..................................................................................................................... 16 4. Contact Information ....................................................................................................... 17 KDC8 Data Wedge Guide for Android COPYRIGHT, LICENSE, and WARNING PAGE Copyright 2002-2025 by KOAMTAC, Inc. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from KOAMTAC, Inc. The material in this manual is subject to change without notice. KOAMTAC reserves the right to make changes to any product to improve reliability, function, or design. KOAMTAC does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. Follow all warnings and instructions marked on manual and units. Use only the power source specified in this manual or marked on the units. Certain KDC products may be covered by the following issued US patent numbers: 7769917, 7954710, 8126399, 8295368, 8346979, 8347366, 8371506, 8483614, 8832323, 9411366, 9542339, 10037488, 10500999, 10520999, 10659580, and 11501278; Korea patent numbers: 101354252, 1020120042930, 1020180124726, and 1020190076161; Japan patent number: 7486376; UK patent numbers: GB2492615, GB2514746; Italy patent number: 102020000014503. Trademarks: KDC®, SKX®, KOAMTAC®, SmartSled®, KOAMTACON®, KTSync®, ConvergedScan®, PayScanGo®, KOAMTACGO®, eZTCP®, eZVSP®, and SMART ACCESSORIES FOR SMARTPHONES/TABLETS® are registered trademarks and property of KOAMTAC, Inc. Bluetooth is a trademark or registered trademark of Bluetooth SIG, Inc. All other product and company names used herein are trademarksê or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by the respective trademark holders. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO ANY TYPE OF MOISTURE. DO NOT LOOK DIRECTLY INTO LASER OR POINT THE LASER INTO ANOTHER PERSON'S EYES. EXPOSURE TO THE BEAM MAY CAUSE EYE DAMAGE. CAUTION: Changes or modifications not expressly approved by the manufacturer must be responsible in compliance with KOAMTAC, Inc. Failure to comply may prohibit the user's authority to operate the equipment. KDC8 Data Wedge Guide for Android 1. Introduction 1.1. KTSync KTSync is an application that enables the user to collect data, such as barcodes, MSR, NFC, and UHF from KOAMTAC KDC devices. The user can also configure their KDC device with KTSync. From 3.3.15, KTSync Android supports KDC8 Data Wedge functionality. When using the Data Wedge feature, KTSync is working as a BLE peripheral and accepts the connection request. If a barcode is scanned using KDC8, the application on another connected device can receive the barcode data. KDC8 Data Wedge Guide for Android 2. KDC8 Data Wedge Configuration 2.1. Preparation 1. Install " KTSync" . You can download it from the Google Play Store. 2. Android devices must be paired with each other. 3. KDC8 must have been successfully activated. Device Roles in This Setup: This setup involves two Android phones, Phone A and Phone B, each with a specific role: Phone A (Client Mode Device): Technically, Phone A works as a BLE peripheral [GATT Server], like a barcode scanner. KDC8 must be activated and running on this device. Scanned data is broadcast to connected devices. This is called the " Client Mode device." Phone B (Host Device): Technically, Phone B acts as a BLE central [GATT Client]. Receives scanned barcode data from the Client Mode device when connected. This is called the " Host Mode device." * Notes In this guide, we used "Samsung XCover 6 Pro" as Phone A and "Samsung Galaxy A35" as Phone B. Both are Android 14 devices. KDC8 Data Wedge Guide for Android 2.1.1. Bluetooth Pairing Please go to Android Settings > Connections > Bluetooth, and make sure Bluetooth is on. When Phone A and Phone B enter the menu, the phone appears under " available devices." If Bluetooth pairing is successful, the device will show in " Paired devices." KDC8 Data Wedge Guide for Android 2.1.2. KDC8 Activation On Phone A [Client], You must activate KDC8. You can input the code and activate KDC8 as follows. Please contact KOAMTAC to request an activation code. 2.1.3. Scan Destination On Phone A, You must change the " Scan Destination" setting for KDC8 to " Off Device(SPP)" . Once configured, Phone A will function as a BLE peripheral, like a barcode scanner, allowing other devices to connect to it. KDC8 Data Wedge Guide for Android * Notes Software Decoder Settings will show if KDC8 is activated. KDC8 Data Wedge Guide for Android Now, Phone A begins BLE advertising, making it ready to accept connections when disconnected. * Notes To accept a connection request, BLE advertising must remain active on the Client Mode device. If the connection fails due to an advertising issue or you want to connect another device, press the "Connect" button to restart BLE advertising. BLE advertising will stop if you click the "Disconnect" button. KDC8 Data Wedge Guide for Android 2.1.4. Show All Bluetooth Device On Phone B [Host], By default, KTSync only shows KDC products. However, to use KDC8 Data Wedge, you must connect to the other phone (Phone A). You must select the option " Show All Bluetooth Devices" to allow connections to non-KDC products. If set, KTSync on the Host device will also display other paired BLE devices in addition to KDC products. KDC8 Data Wedge Guide for Android 3. KDC8 Data Wedge Procedure 3.1. Connection On Phone B, Please select the paired Phone A [Client] from the available device list. If the connection is successful, the " Connected" message will be displayed. * Notes The BLE connection on the Client Mode device is managed by the system and it is maintained by the system even if you close KTSync on Client mode device. You should disconnect explicitly from the Host Mode device side. If not, scanned barcodes won't be received properly, although it seems that the connection is established. If that is the case, please disconnect from BLE central side (Phone B) or reset the Bluetooth power on Phone A. KDC8 Data Wedge Guide for Android On Phone A, If the device is connected, the connection state will be changed and BLE advertisement is stopped. * Notes The BLE connection on the Client Mode device is managed by the system and it is maintained by the system. If the connection is established outside the application or managed by the system, the connection status may change unexpectedly, potentially causing minor issues. KDC8 Data Wedge Guide for Android 3.2. Scan Barcode On Phone A, Tap the " Scan" button to scan a barcode using KDC8. When a barcode is scanned, the data will be sent to the connected device, if the connection was successfully established. KDC8 Data Wedge Guide for Android 4. Contact Information CORPORATE HEADQUARTERS 100 Village Blvd., Suite 300 Princeton, NJ 08540, USA Phone: 609-256-4700 Email: support@koamtac.com For more information, visit our website - www.koamtac.com