eufy Security SoloCam S340 Quick Start Guide

At a Glance

The SoloCam S340 features the following components:

• 1. LED Indicator: Shows the status of the camera.
• 2. Speaker: For audio output.
• 3. Telephoto Lens: For zoomed-in views.
• 4. Photosensitive Sensor: Adjusts camera settings based on light.
• 5. PIR Sensor: Detects motion.
• 6. Microphone: For audio input.
• 7. Wide-Angle Lens: For a broader field of view.
• 8. LED Light: Provides illumination.
• 9. Solar Panel Mounting Hole: For attaching the solar panel.
• 10. Mounting Hook: For securing the camera.
• 11. USB-C Charging Port: For charging the device.
• 12. SYNC Button: Used for syncing with other devices.

Model: T8170

Charging Your Camera

Fully charge the camera before first use. The camera charges via a 5V/2A connection.

Charging Time: 8 Hours

Setting Up the System

1. Download and install the eufy Security app. Sign in or create an account.
2. Follow the in-app instructions to add the camera to your device list.

Mounting Your Camera

Select a Location and a Height

Choose a location that provides the desired view. It is recommended to mount the camera 7-10 ft (2-3 m) above the ground.

To ensure optimal detection, avoid mounting the camera directly facing the monitoring area. Instead, angle it to prevent blind spots.

Solar Panel Setup

Option 1: Mount the Camera and Solar Panel Separately (Best for Strong Solar Power)

If the camera's view is obstructed, mount the solar panel independently using the provided USB-C extension cable for optimal solar charging. The camera can be mounted on a wall or ceiling.

Installation Steps:

1. Drill holes using a 15/64 inch (5.95 mm) drill bit with the provided positioning card, then insert anchors.
2. Connect the solar panel to the camera using the USB-C extension cable.
3. Secure the camera to the mounting bracket.
4. Install the solar panel's mounting bracket in a suitable position.
5. Attach the solar panel to its mounting bracket and adjust the angle (20°-30° recommended).

Option 2: Mount the Camera with the Solar Panel Attached (Less Drilling)

If the camera's view is not obstructed, attach the solar panel directly to the top of the camera.

Installation Steps:

1. Secure the solar panel's mounting bracket to the top of the camera.
2. Install the solar panel onto its mounting bracket by turning it.
3. Connect the USB-C connector to the USB-C port of the solar panel.
4. Drill holes using a 15/64 inch (5.95 mm) drill bit with the included positioning card, then insert anchors.
5. Secure the camera to the mounting bracket and adjust the angle (20°-30° recommended).

Safety Information

Operating Temperature: -20°C to 50°C (Charging temperature: 0°C to 40°C).

Avoid using the device in environments that exceed recommended temperature limits or are excessively wet. It is recommended to operate the device in an environment with temperatures ranging from 5°C to 25°C, with normal room temperature and good ventilation when powered.

Warning: Risk of explosion if an incorrect battery type is used. Dispose of used batteries according to instructions.

Attention:

• Replacing a battery with an incorrect type can bypass safeguards and create danger.
• Disposing of batteries in fire, high heat, crushing, or cutting can cause explosions and leakage of flammable liquids and gases.
• Batteries left in extremely hot environments or subjected to extremely low air pressure may explode and leak flammable liquids and gases.

French Warning:

• Le remplacement d'une batterie par un type incorrect peut contourner les protections et créer un danger.
• L'élimination d'une pile dans un feu ou une autre source de chaleur importante, ou par écrasement ou découpage, peut entraîner une explosion ainsi qu'une fuite de liquides et de gaz inflammables.
• Le fait de laisser une batterie dans un environnement extrêmement chaud peut entraîner une explosion ainsi qu'une fuite de liquides et de gaz inflammables.
• Une batterie soumise à une pression d'air extrêmement faible peut provoquer une explosion ainsi qu'une fuite de liquides et de gaz inflammables.

Notice

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.

Warning: Unauthorized modifications may void the user's authority to operate the equipment.

This equipment has been tested and found to comply with Class B digital device limits, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installations.

This equipment generates, uses, and can radiate radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio communications. No guarantee of no interference in a particular installation.

If interference occurs, users are encouraged to:

• Reorient or relocate the receiving antenna.
• Increase separation between equipment and receiver.
• Connect equipment to an outlet on a different circuit than the receiver.
• Consult the dealer or an experienced radio/TV technician.

FCC Radio Frequency Exposure Statement: The device meets general RF exposure requirements and can be used in fixed/mobile exposure conditions with a minimum separation distance of 20 cm.

Notice: Use shielded cables for all connections to other computing devices to maintain FCC compliance.

Importer: POWER MOBILE LIFE, LLC, 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004. Telephone: 1-800-988-7973

IC Statement

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to two conditions: (1) it may not cause interference, and (2) it must accept any interference, including interference that may cause undesired operation.

French IC Statement: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

IC RF Statement: When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps afin de vous conformer aux exigences en matière d'exposition RF.

Product Disposal and Recycling

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. The symbol indicates that the product must not be discarded as household waste. It should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health, and the environment. For more information, contact your local municipality, disposal service, or the shop where you bought this product.

Customer Service

12-month limited warranty

Contact Numbers:

• US: +1 (800) 988-7973
• UK: +44 (0) 1604 936200
• DE: +49 (0) 69 9579 7960
• China: +86 400 0550 036
• Japan: +81 03 4455 7823
• AU: +61 3 8331 4800
• Egypt: +20 8000000826
• UAE: +971 8000320817
• Kuwait: +965 22069086
• Saudi Arabia: +966 8008500030

Email: support@eufy.com

Address: Anker Innovations Limited, Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

Social Media:

• Facebook: @EufyOfficial
• Twitter: @EufyOfficial
• Instagram: @EufyOfficial