JVC CS-V418X Car Stereo Speaker

Installation Instructions

Step 1

1. CS-V418X
2. JVCKENWOOD Corporation
3. Hatchback 231-1820

Step 2

1. JVCKENWOOD Corporation
2. Hatchback 231-1820

Step 3

1. CS-V418X
2. JVCKENWOOD Corporation
3. Hatchback 231-1820

Parts

• Part 1: Screws (x 8) - Ø 4 (Dia. 3/16) x 25 (1)
• Part 2: Wire Clips (x 8) - Ø 4 (Dia. 3/16)
• Part 3: Speaker Wires (x 2)

Connection Diagram

Connect the speaker wires from the amplifier to the left and right speakers. The gray wire connects to the positive terminal of the right speaker, and the black lined wire connects to the negative terminal of the right speaker. Similarly, the white wire connects to the positive terminal of the left speaker, and the black lined wire connects to the negative terminal of the left speaker.

Diagram showing amplifier connection to left and right speakers with positive and negative terminals indicated.

Installation Guide

Paper Pattern: Use the provided paper pattern to mark the cutout location. The cutout diameter is Ø103mm.

Diagram showing a hand cutting out a circle using scissors based on a paper pattern.

Installation Steps:

1. Secure the speaker using the provided screws.
2. Ensure the speaker is properly mounted.

Diagram showing a speaker being mounted into a car door panel with screws and a tool.

Specifications

• Type: 10 cm (4") Dual Cone Speaker
• Power Handling Capacity: 180 W (Peak Power) / 20 W (RMS)
• Impedance: 4 Ω
• Mass: 0.30 kg (0.67lbs)

Dimensions

Diagram showing the dimensions of the speaker. The outer diameter is approximately 116mm (4-19/32 inches), and the cutout diameter is 103mm. The mounting depth is approximately 45mm (1-25/32 inches).

• Outer Diameter: Ø116mm (Dia. 4-19/32)
• Cutout Diameter: Ø103mm
• Mounting Depth: 45mm (1-25/32)
• Speaker Depth: Ø102mm (Dia. 4-1/32)
• Height: Ø60mm (Dia. 2-3/8)

Important Note

Caution: Do not use the provided parts for other purposes (e.g., using a speaker cord instead of a power cord). Otherwise, malfunction or fire hazard could result.