Assembly Instructions: Wall Cabinet

Introduction

This document provides assembly instructions for the Wall Cabinet. Please read all instructions carefully before beginning assembly.

Note: It's much better if you get some company for this! ?‍?‍?

Index

• What Will You Need?
• Where Should You Start?
• What's in the Hardware Bag?
• How Do the Dowels and Minifix System Work?
• Let's Start Assembling!
• How Much Weight Does My Cabinet Resist?
• Taking Care of Your Cabinet
• Warranty Policy

What Will You Need?

To assemble your wall cabinet, you will need the following tools:

• Phillips head screwdriver ⚙️
• Flat head screwdriver ⚙️
• Hammer ?

You will also need a flat, smooth surface for assembly. You can use the cardboard from the box or a rug.

An electric screwdriver isn't necessary, but it can make the work much easier. ⚙️

Note: Hi! My name is Armando, and I'll be with you while you assemble this cabinet. ?

Where Should You Start?

This is so IMPORTANT! Over the next few pages is the panel and hardware content for this cabinet. Please make sure that the quantity of each one is correct, and that everything is in good shape. (When the cabinet is already assembled, there's no warranty for this.)

Panel Quantity

What's in the Hardware Bag?

Be careful! Try not to lose anything from this bag; its content is necessary for assembling your cabinet.

How Do the Dowels and Minifix System Work?

Everytime you're using one of these connectors during the assembly, you should follow these same steps.

Wood Dowels

They are little wooden cylinders.

1. Insert the dowel into the indicated hole and softly hit it until it's fully inside.
2. When joining two panels together, don't forget to gently hit the panels to adjust the joint.

Minifix System

It's a joint compound of two parts: a spreading bolt and a Minifix cam.

1. This is a Minifix cam. It has a little arrow on its upper surface.
2. You should insert these cams with the little arrow pointing towards the drilling on the panel's edge (shown on the left).
3. This is a spreading bolt. You should put it with the black plastic part facing down.
4. After joining two panels together, you should turn the cams 180° with a Phillips head screwdriver to adjust and secure the joint. ?

Let's Start Assembling!

You can see the last page of this manual to have a full look of the panels of this cabinet.

Step 1

Prepare panel F by inserting spreading bolts into the designated holes. Prepare panel B by inserting Minifix cams into their respective holes, ensuring the arrow on each cam points towards the edge hole.

Step 2

Insert spreading bolts into panel B. Attach Minifix cams to panel F, ensuring the arrow points towards the edge hole.

Step 3

Join panel F to panel B. Insert spreading bolts into panel A. Attach Minifix cams to panel B and F, aligning them with the holes on panel A.

Step 4

Join panel B and F to panel A. Insert spreading bolts into panel A. Attach Minifix cams to panel B and F, aligning them with the holes on panel A.

Step 5

Insert spreading bolts into panel C. Attach Minifix cams to panel C, ensuring the arrow points towards the edge hole.

Step 6

Join panel C to the structure formed by panels A, B, and F. Use a Phillips screwdriver to rotate the Minifix cams 180° to secure the joint.

Step 7

Insert spreading bolts into panel D. Attach Minifix cams to panels B and A, aligning them with the holes on panel D.

Step 8

Join panel D to the assembled structure (A, B, C, F). Use a Phillips screwdriver to rotate the Minifix cams 180° to secure the joint.

Step 9

Prepare panel H by inserting spreading bolts. Attach Minifix cams to panel H, ensuring the arrow points towards the edge hole.

Step 10

Prepare panel G by inserting spreading bolts. Attach Minifix cams to panel G, ensuring the arrow points towards the edge hole.

Step 11

Join panel G to panel H. Use a Phillips screwdriver to rotate the Minifix cams 180° to secure the joint.

Step 12

Prepare panel I by inserting spreading bolts. Attach Minifix cams to panel I, ensuring the arrow points towards the edge hole.

Step 13

Join panel I to the structure formed by panels G and H. Use a Phillips screwdriver to rotate the Minifix cams 180° to secure the joint.

Step 14

Prepare panel J by inserting spreading bolts. Attach Minifix cams to panel J, ensuring the arrow points towards the edge hole.

Step 15

Join panel J to the structure formed by panels I, G, and H. Use a Phillips screwdriver to rotate the Minifix cams 180° to secure the joint.

Step 16

Prepare the two M panels by inserting spreading bolts. Attach Minifix cams to panel K, ensuring the arrow points towards the edge hole.

Step 17

Attach the M panels (M1 and M2) to panel K. Insert the glass panel into the designated groove.

Step 18

Prepare panel L by inserting spreading bolts. Attach Minifix cams to panel L, ensuring the arrow points towards the edge hole.

Step 19

Join panel L to the assembly of panels K, M1, M2, and Glass. Use a Phillips screwdriver to rotate the Minifix cams 180° to secure the joint.

Step 20

The main cabinet box structure (panels A, B, C, D, F, N, O) is now assembled.

Step 21

The assembly of internal components like shelves (E, G) and the door/drawer front (J) is shown in the diagrams.

Step 22: Fixing the Cabinet to the Wall

To securely fix the cabinet to the wall, use the provided wall anchors and drywall screws (x4). A 5/16" drill bit is recommended. Ensure correct placement using the provided dimensions: 58 cm (22.83 inches) from the top, 38.4 cm (15.11 inches) for the center, and 58 cm (22.83 inches) from the bottom. Panel N is 44.6 cm (17.5 inches) high, and Panel O is 24.3 cm (9.5 inches) high.

Step 23: Hinge Adjustment

Adjust the hinges for depth, side, and height as needed to ensure proper door alignment. After all Minifix cams are adjusted, cover them with the provided cover caps. Once assembly is complete, carefully lift off all adhesive letters from the panels. ⚙️

How Much Weight Does My Cabinet Resist?

The cabinet shelves have the following weight capacities:

• Top shelf: 11.02 lbs (5 Kg)
• Middle shelf: 22 lbs (10 Kg)
• Bottom shelf: 17.6 lbs (8 Kg)

Congratulations! It's done. ?

SUPER IMPORTANT! We suggest fixing the cabinet to the wall to avoid tipping and harming anyone, especially children. Be especially careful with children. ?‍?‍?‍?

Taking Care of Your Cabinet

• Do not paint the cabinet.
• The cabinet is exclusively for indoor spaces. Do not expose it to direct sun.
• Clean the metallic hardware with a dry cloth.
• DO NOT overload the cabinet (see suggested loads).
• Do not hit or hammer the cabinet (only when indicated here).
• Clean with thinner, a soft soap solution, or simply a damp cloth.
• Do not drag the cabinet; lift it up with other people.
• Avoid direct contact with water, fire, or exposing it to high heat.

Cabinet Panels Overview

An exploded view diagram shows all the cabinet panels (A through O) and their assembly configuration, illustrating how they fit together.

Warranty Policy

WARRANTY POLICY / PÓLIZA DE GARANTÍA

Furniture has a 3-year warranty coverage on wooden parts and a 1-year warranty coverage on hardware pieces from the manufacturing date, which can be found in the lot number printed on the product box and the assembly instructions leaflet.

Warranty covers materials and workmanship imperfections which impair the assembly or correct functioning of the cabinet.

This warranty is not valid if defects or imperfections are caused by incorrect following of the assembly instructions, warnings, and recommendations, misuse, intentional damage, fire or flood, or after modifications or any kind of alteration, or if repaired by someone not authorized. It also becomes void if the product is assembled more than 3 months after the date of purchase. These defects MUST be reported before the warranty coverage period ends. Once the product has been assembled, the company will not be responsible for defective and/or damaged parts.

This warranty is ONLY valid for the ORIGINAL PURCHASER; it doesn't apply if the product has been resold, rented, etc.

Furniture will take no liability for incidental or consequential damages caused to or by the product (This may not apply in your state).

To make this warranty valid, you must write to our customer service email describing the product defect, lot number, and submitting your sales receipt or proof of purchase, or contact us at our customer service line. Replaced parts will be under the product's original warranty coverage period. Damaged parts will become property of the company.

There are no other warranties applicable to this product.