FeiyuTech G6 3-Axis Stabilized Handheld Gimbal
User Manual V1.0
1. Product Overview
The sports camera shown in the diagrams is not included in the package.
Gimbal Components:
- Retainer Bar: Secures the camera.
- Tilt Axis: Allows the camera to tilt up or down.
- Cross Arm: Connects the tilt and roll axes.
- Roll Axis: Allows the camera to roll left or right.
- Display: Shows gimbal status and modes.
- Joystick: Controls camera movement.
- Function Button: Used for power, mode switching, and initialization.
- Shutter Button: Controls camera shutter.
- Setting Button: Used for switching camera modes and parameters.
- Micro USB Port: For charging the gimbal.
- 1/4-20 Thread Mount: For attaching to tripods or other accessories.
- Thumb Screw: Secures the camera to the mounting plate.
- Mounting Plate: Where the camera is attached.
- Knob Ring: Used for balancing adjustments.
- Vertical Arm: Connects the roll axis to the handle.
- Pan Axis: Allows the camera to pan left or right.
- Positioning Pin: Aids in camera mounting.
- Handle: Grip for the user.
Accessories Included:
- Micro USB cable x1
- Type C charging cable x1
- 26650 Li-ion rechargeable battery x1
2. Quick Start Guide
1. Install Battery
Please fully charge the battery before powering on the gimbal for the first time. Remove the bottom cap, insert a 26650 battery, and then tighten the cap.
2. Put the Camera On
Mount the camera before powering on the gimbal. When not in use, turn off the gimbal and remove the camera.
Example: GoPro HERO 5
Attach the camera to the mounting plate and tighten it with the retainer bar and thumb screw.
Mounting Options:
- Option 1: Normal Position
- Option 2: Reverse Position
Note: It is suggested to turn on the camera before installation for the normal position.
Put the RX0 Camera On
To work with the RX0 camera, an RX0 camera adapter kit is required (optional).
Replacement Steps:
- Loosen and remove the original fixed plate of the gimbal.
- Install the RX0 adapter plate and tighten screws ① and ②.
- Insert set screw ③ from the bottom of the RX0 adapter plate into the camera.
- Place the camera and tighten the set screw.
3. Balance the Gimbal (Before Power On)
Proper balancing is crucial for gimbal performance.
- If the camera tilts to the left: Loosen the knob ring, pull the cross arm out to the right until the camera is horizontal.
- If the camera tilts to the right: Loosen the knob ring, push the cross arm in to the left until the camera is horizontal.
The goal is to achieve a 'Best balance' where the camera remains level.
4. Power On / Off
To power on or off, long press the function button. The display will show the FeiyuTech logo (Fy), and you can release the button when you hear a beep tone.
3. Charging
1. Charging for Gimbal
- Option 1: Charging with Micro USB cable: Connect the gimbal's USB port to a power source using the provided Micro USB cable. Charging status icons will appear on the display screen, indicating charging progress and completion. Input: 5V/2A.
- Option 2: Charge the battery separately: Remove the battery and charge it using a compatible charger (equipped by user).
2. Charging for Camera
Connect the camera to the gimbal using the Type C charging cable. The camera can be charged when the gimbal is powered on, using the camera power supply port on the gimbal.
4. Functions
Instructions of Button
| Function Button | Operation | Function | Explanation |
|---|---|---|---|
| Function Button | Single tap | Panning Mode / Lock Mode | Single tap to switch between panning mode and lock mode. |
| Function Button | Double tap | Follow mode | Under follow mode, control the pan axis by moving the joystick to the left or right. |
| Function Button | Triple tap | Rotate 180° in horizontal | Make the camera lens rotate 180°. |
| Function Button | Quadruple tap | Auto-rotation Mode | Enter auto-rotation mode. Refer to the chapter "Auto-rotation Mode" on pages 7-8. |
| Function Button | Five tap | Initialization | Enter initialization. Refer to the chapter "Gimbal Initialization" on page 11. |
| Trigger Button | Press and hold | Lock mode | In panning mode or follow mode, press and hold the trigger button to enter lock mode; release it to return to the previous mode. |
| Trigger Button | Double tap | Reset | Return to panning mode, with tilt, roll, and pan axes returning to their initial level. |
| Setting Button | Long press | Switch interface for camera parameters | Long press in the main interface to switch to the interface for camera parameters. |
| Setting Button | Single tap | Switch camera modes / main interface | Single tap in the main interface to switch camera modes (camera needs to be connected). Single tap in the interface for camera parameters to switch to the main interface. |
Note: Firmware upgrades may alter manual operation functions, and actual product features might differ. Please find the latest manual on the official website.
Display Description
The current mode or status of the gimbal can be identified by the display icons.
Display Icons and Modes/Status:
- HF: Panning mode
- AF: Follow mode
- LK: Lock mode
- SET WIFI VIA APP: Prompt to open the App settings to connect via WiFi.
- Bluetooth connected: ? Connected
- Bluetooth not connected: ? Not connected
- Camera not connected: ? Not connected
- Camera photo shooting: ? Photo shooting
- Camera video shooting: ? Video shooting
- Camera time-lapse video shooting: ? Time-lapse video shooting
- WiFi connected: ? Connected
- WiFi not connected: ? Not connected
- Battery level: ? Level indicator
Refer to the chapter "Connecting to camera" on page 10.
Setting Button Operation
Single tap the setting button to switch camera modes.
Shutter Button Operation
After connecting the gimbal to the camera via the Feiyu ON App, a single tap of the shutter button can control the camera for shooting.
Using the Joystick to Set Up Parameters
The joystick can be used to navigate and select parameters.
- Move left/right: Switch content.
- Move up/down: Switch setting parameters.
- To confirm: Move to right until "OK" displays, then move right again for confirmation.
Modes:
- Panning Mode (Default): The roll and tilt directions are fixed. The camera moves according to the left-right movements of the user's hand.
- Lock Mode: The orientation of the camera is fixed.
- Follow Mode: The roll direction is fixed. The camera moves according to the left-right and up-down movements of the user's hand.
- Reset: Returns the gimbal to panning mode, with all three axes reset to their default positions.
Horizontal Angle Control
You can control the horizon angle using the horizontal adjustment button while in panning mode, follow mode, or lock mode.
Diagram: Shows the horizontal adjustment button on the gimbal handle. Moving it left or right adjusts the horizon.
Manual Lock
The camera can be manually positioned in panning mode, follow mode, or lock mode. Both the pan and tilt axes can be manually set up.
Manually move the camera to the desired position and hold for half a second. New tilt and/or pan positions are automatically saved.
Diagram: Illustrates manually tilting the camera and holding it, showing the saved position.
Auto-rotation Mode
The G6 gimbal can create constant speed movements in auto-rotation mode, suitable for regular video and motion timelapse photography. For best performance, attach the gimbal to a tripod.
1. Set Rotation Speed in Feiyu ON App
Connect to the Feiyu ON App and select the desired speed from the auto-rotation mode rate options in the settings menu.
G6 Rotation Speed Table:
| 12s/turn | 18s/turn | 24s/turn | 30s/turn | 1min/turn | 2min/turn | 4min/turn | 8min/turn | 15min/turn | 30min/turn | 1h/turn (Default) | 4h/turn | 8h/turn |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Note: Both pan and tilt directions can be rotated.
2. Enter Auto-rotation Mode
Enter auto-rotation mode by quadruple tapping the function button.
3. Set Rotation Start Position
Record the first position (start position) by manually moving the camera to the desired position. Hold for half a second, then single tap the function button to record the start position.
4. Set Rotation End Position
Record the second position (end position) by manually moving the camera to the desired position. Hold for half a second, then single tap the function button to record the end position.
5. Start Auto Rotation Movements
The gimbal automatically returns to the start position, and the tilt and pan axes rotate at a constant speed to the end position, entering follow mode at the end.
Exit Auto-rotation Mode:
- After auto-rotation finishes, the gimbal automatically exits and enters follow mode.
- During auto-rotation mode or setting, double tap the trigger button to exit and reset.
5. Download and Connect App
1. Download and Install "Feiyu ON" App
- iOS Version: Download from the App Store.
- Android Version: Download from Google Play or other app stores (e.g., 360 Mobile Assistant, Wandoujia).
Scan QR codes to automatically link to the app download page.
2. Connecting App
Turn on Bluetooth on your smartphone and run the Feiyu ON App. Follow the on-screen instructions to connect the smartphone to the gimbal via Bluetooth.
Diagram: Shows connecting the gimbal (G series) via Bluetooth, selecting the gimbal (e.g., FY_G6_XX), and pressing 'Connect'. The app interface shows controls like RESET, FOLLOW, TILT, LOCK.
6. Connecting to Camera
The G6 gimbal can connect to compatible cameras using the Feiyu ON App.
Operations Available After Connecting:
| Button | Operation | Function |
|---|---|---|
| Setting Button | Single tap | Switch camera modes in the gimbal's main interface. |
| Shutter Button | Single tap | Control camera shooting (start/stop) from the gimbal's main interface. |
Steps of Connecting to Camera:
- Turn on your sports camera's WiFi.
- In the Feiyu ON App, navigate to "Settings" → "Parameters Settings" → "WiFi Settings".
- Select your camera model.
- Select your camera's connection name and enter the correct WiFi password.
- Wait for connection.
- Connection successful.
If the ? icon appears on the display, the gimbal failed to connect. Try restarting the gimbal or camera, or follow the connection steps again.
7. Firmware Upgrade
Connect the gimbal to the Feiyu ON App to upgrade the firmware.
Diagram: Shows the Feiyu ON app interface with "Settings" and "Update" options. A "Query Update" section shows current and latest gimbal versions and prompts for upgrade.
8. Gimbal Initialization
Initialize your gimbal when:
- The camera is not level.
- The gimbal has not been used for a long period.
- In case of extreme temperature variations.
Adjusting Steps:
- Tap the function button 5 consecutive times. You will hear a "beep" sound, the motor will stop working, and "Initing" will appear on the display.
- Place the gimbal on a flat, unmoved surface. The gimbal will automatically detect the surface and start initializing, showing "Initing" on the display. "Success" will be displayed upon completion.
- After initialization is done, single tap the function button to wake up the gimbal and return to the main interface.
Note: If initialization is not successful after a long time, long press the function button to turn off the gimbal, restart it, and then initialize again.
9. Technical Specifications
Dimensions (Unit: mm)
Diagrams showing the gimbal's dimensions: Height approx. 268mm, Width approx. 119mm, Depth approx. 79mm.
Specifications:
- Max. Tilting Range: 360°
- Max. Rolling Range: 320°
- Max. Panning Range: 360°
- Tilting Speed: Min: 2°/s - Max: 75°/s
- Panning Speed: Min: 3°/s - Max: 150°/s
- Operation Time: 12 Hours
- Adaption Camera: GoPro HERO6 / HERO5 and other cameras with the same size. Replace the optional RX0 adapter plate to be compatible with RX0 camera.
- Weight: 336g (Not including battery and camera)
Disclaimer
Prohibit any user for any illegal purpose. Users will be responsible for all behaviors of purchase and use products.
The Company assumes no liability for any risks related to or resulting from the debug and use of this product (including direct, indirect, or third-party losses).
For any unknown sources of using, FeiyuTech will not provide any services.
The updating and changes of product firmware and program may cause changes in function descriptions in this user manual. Please read the instructions carefully before upgrading the firmware and use the corresponding user manual.
You can get the latest user manual from the official website: www.feiyu-tech.com.
FeiyuTech reserves the right to amend this manual and the terms and conditions of use the gimbal at any time.
Attention:
- Please correctly assemble the gimbal in accordance with the diagram.
- Please install the camera before powering on the gimbal.
- When the gimbal is not in use or placed on the table, please ensure it is powered off.
- Remove the battery when not in use for a long time.
Contact Information
Guilin Feiyu Technology Incorporated Company
Website: www.feiyu-tech.com
E-mail: service@feiyu-tech.com
Tel: +86(0)773 2320865
Due to software and hardware improvements, your actual product might differ from the descriptions and pictures in this user manual. You can get the latest user manual from the official website.
For more information, please visit our official website.
Social Media links are provided via QR codes on the original document.
