HR-30BTL Portable DSP Radio with Bluetooth

Specifications

Model: HR-30BTL

Features:

• FM/AM/SW 3-band DSP radio
• USB/TF MP3/BT player
• BT-CONNECT (device name: Bluetooth)
• LED light
• High sensitivity antenna
• Built-in speaker
• Built-in rechargeable battery (3.7V/1200MA)
• DC: 5V

Accessories:

• USB charging cable
• Hand strap

Radio Operation:

1. Choose bands: Turn the "FUNCTION" to select MP3, FM, AM, SW.
2. Adjust volume: Turn the "VOLUME" button to select the desired volume.
3. Adjust antenna position for best receiving effect.
4. To turn off the radio, turn the "VOLUME" button to the end.

USB/TF Operation:

Turn on the radio, insert USB or TF card, press IORI button to choose music. Press Pause playback. Long press "VOLUME" button to adjust volume.

Technical Specifications:

• DC: 5V
• Output power: 1.5W
• Battery: 3.7V/18650 LI-ION
• Speaker: 5W 2Ω 2.5Inch
• Receiving frequency: AM: 522-1620KHz, FM: 88-108MHz, SW: 5.9-18.0 MHz
• Power Source: Battery Operation

Rechargeable Battery Usage:

1. How to use rechargeable battery: The unit has a built-in rechargeable battery. For first-time use, charge for 12 hours.
2. Operating time: With a rechargeable battery, the unit can operate for over 300 minutes for radio playback.

Battery Installation:

1. Open the battery cover.
2. Insert batteries, ensuring correct numerical order and polarity (+/-) to prevent damage.

Precautions:

• Avoid strong impacts or drops.
• Do not expose to damp, corrosive environments, high temperatures, or direct sunlight.
• Clean the surface with a soft cloth and mild detergent. Avoid strong solvents like alcohol or benzine.

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• (1) This device may not cause harmful interference.
• (2) This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Product Diagram and Component Labels

The device features a front panel with controls and a speaker. A rear panel includes connection ports and an antenna.

Front Panel Components:

1. VOLUME control knob
2. SPEAKER
3. BAND SWITCH
4. COORDINATING WINDOW AND POINTERS (Tuning display)
5. MODE button
6. PREV button (Previous track/station)
7. PLAY/PAUSE button
8. NEXT button (Next track/station)
9. TUNING knob
10. USB JACK (for USB drive)
11. PLAYER LED indicator
12. TF JACK (for TF memory card)
13. AUX JACK (Auxiliary input)
14. LAMP SWITCH
15. DC 5V JACK (Power input)
16. CHARGE LED indicator
17. BATTERY COMPARTMENT (located on the back/bottom)
18. TELESCOPIC ANTENNA
19. TABLE LAMP (integrated light)