KNOXHULT Wall Cabinet Assembly Instructions

Safety First ⚠️

WARNING: Tip-Over Hazard

Serious or fatal crushing injuries can occur if furniture tips over. To prevent this, the furniture MUST be permanently fixed to the wall/floor.

Wall/Floor Fixing Devices

Fixing devices are NOT included as different wall/floor materials require different types of fixings. Use fixings suitable for your home's materials. Consult a specialized dealer for advice.

Safety Recommendations

• Place heaviest items in the lowest drawers.
• Prevent children from climbing or hanging on drawers, doors, or shelves.

Tools Required ?️

The following tools are typically needed:

• Screwdriver (Phillips head)
• Hammer
• Spirit Level

Parts Identification

Before assembly, identify all parts and check quantities:

• Dowels (Part 118331): 16x
• Screws (Part 101350): 12x
• Cam Locks/Connectors (Part 119252): 16x
• Shelf Supports (Part 101577): 8x
• Small Nails (Part 101221): 1x bag
• Mounting Brackets (Part 115754): 3x
• Wall Mounting Plates (Part 115753): 3x
• Securing Clips (Part 103693): 3x
• Screws (Part 100347): 6x
• Long Metal Tracks/Runners: 2x
• Other numbered parts (e.g., 10124228, 10125040, etc.) are for drawer runners.

Assembly Steps

Step 1: Prepare Base Panels

Attach Wall Mounting Plates (Part 115753, 3x) to the base panels using screws (Part 100347, 3x). Ensure correct orientation as shown.

Step 2: Assemble Main Frame

Insert Dowels (Part 118331, 12x) into side panels. Attach side connectors (Part 101350, 12x). Join panels using connector screws (Part 101350, 4x).

Step 3: Install Drawer Runners

Attach drawer runners (various parts) to the side panels. Use a spirit level ? to ensure they are level.

Step 4: Attach Runners to Other Panels

Attach corresponding runner parts (Part 118331, 4x) to other main panels.

Step 5: Continue Frame Assembly

Connect panels using screws (Part 101350, 8x).

Step 6: Attach Vertical Divider

Insert dowels and attach the vertical divider panel.

Step 7: Attach Side Panels

Attach side panels using connectors (Part 119252, 2x each).

Step 8: Connect Top/Bottom Panels

Join top and bottom panels using connectors (Part 119252, 2x).

Step 9: Secure Cabinet Structure

Use cam locks and dowels (Part 119252, 12x) to secure the main cabinet structure.

Step 10: Attach Back Support

Insert pins for back panel support.

Step 11: Install Back Panels

Slide back panels into grooves. Secure with Small Nails (Part 101221) using a hammer. Reinforce with approximately 27 nails in total.

Step 12: Attach Wall Mounting Hardware

Attach Mounting Brackets (Part 103693, 3x) to the cabinet top rear using screws (Part 115754, 3x).

Step 13: Wall Mounting Preparation

Diagram shows correct ✔️ and incorrect ❌ wall fixing methods. Use appropriate fixings for your wall type.

Step 14: Mount Cabinet to Wall

Align cabinet brackets with wall fixings. Adjust position using up/down ↕️ and side-to-side ↔️ arrows for precise placement.

Step 15: Secure Cabinet to Wall

Insert Securing Clips (Part 103693, 3x) into mounting brackets to lock the cabinet.

Step 16: Install Shelves

Insert Shelf Supports (Part 101577, 8x) at desired heights and place shelves on them.

Step 17: Install Doors

Attach the glass doors by hooking them onto the runners. Adjust doors using provided screws for proper alignment and smooth operation.