Bosch Appliance Stacking Kit Assembly Instructions

General Safety and Preparation

Before beginning the assembly process, ensure you have all the necessary components. This stacking kit is designed for use with appliances that have a width of less than 60 cm.

⚠️ Important Safety Information:

• Avoid touching the appliance with wet hands. Ensure proper electrical grounding. [Electrical Plug Symbol]
• Always follow electrical safety guidelines.

Included Components

The stacking kit typically includes the following parts:

• 1x Main stacking frame structure
• 4x Screws for securing the frame to the washing machine
• 1x Bracket (specific type may vary by model)
• (Depending on the specific kit variant, additional parts such as drawer slide rails may be included.)

Assembly and Installation Steps

1. Assemble the main stacking frame. This involves connecting the various parts of the frame together to form a stable structure.

   [Diagram: Illustrates the assembly of the stacking frame components.]

2. Attach the mounting brackets, typically labeled A and B, to the assembled frame. Ensure they are oriented correctly as per the diagram.

   [Diagram: Shows brackets A and B being screwed onto the frame structure.]

3. Carefully place the assembled stacking frame onto the top surface of the washing machine. Ensure it is centered and sits level.

   [Diagram: Depicts the frame being lowered onto the washing machine.]

4. Secure the frame to the washing machine using the provided screws. Tighten them firmly to ensure a stable attachment.

   [Diagram: Shows screws being inserted to fix the frame to the washing machine.]

5. If your kit includes a pull-out drawer, attach the drawer slide rails to the frame at this stage.

   [Diagram: Illustrates drawer slides being attached to the frame.]

6. Install the drawer by sliding it onto the attached slide rails.

   [Diagram: Shows the drawer being inserted into the frame's slide rails.]

7. Carefully lift the dryer and position it on top of the assembled stacking kit. Ensure the dryer is correctly aligned with the frame.

   [Diagram: Shows a person lifting a dryer and placing it onto the stacking kit.]

8. Secure the dryer to the stacking kit using the remaining provided screws. This step is crucial for stability and safety.

   [Diagram: Shows screws being used to fix the dryer to the stacking kit.]

9. The stacked unit is now assembled. Verify that all connections are tight and the unit is stable.

   [Diagram: Shows the completed stacked washing machine and dryer unit.]

10. A different view of the completed installation for reference.

    [Diagram: Shows the completed stacked unit from an alternative angle.]

11. ⚠️ Warning: Do not tilt the appliance during installation or operation. This can cause damage or instability.

    [Diagram: Features a warning symbol indicating against tilting the appliance.]

12. Ensure a minimum clearance of 17mm is maintained between the appliance and the wall. Observe all safety warnings related to electrical connections and water supply.

    [Diagram: Displays a measurement indicating a minimum 17mm clearance from the wall, along with safety symbols for electricity and water.]

13. An alternative depiction of placing the dryer on top of the stacking kit.

    [Diagram: Shows the dryer being positioned onto the stacking kit.]

14. Detailed view of the process for securing the dryer to the stacking kit.

    [Diagram: Shows the steps involved in securing the dryer.]

15. Further details illustrating the method for securing the dryer.

    [Diagram: Provides additional close-up views of the securing process.]

16. Identification of specific securing points, labeled A and B, on the dryer and stacking kit.

    [Diagram: Highlights specific points A and B for fastening the dryer.]