Bosch WTZ27500 Stacking Kit Assembly Instructions
This document provides instructions for assembling the Bosch WTZ27500 stacking kit. This kit allows for the safe and secure stacking of a dryer on top of a washing machine, optimizing space in your laundry area. Please follow these steps carefully for correct installation. Assembly may vary slightly depending on the specific model.
Maximum Load Capacity: 16 kg / 35 lb
Document Reference: MTA 9 340 543 00, dated 21.06.2023
Model Numbers: WTZ27500, WZ27500, WTZ27500UC
Parts Included
The kit typically includes:
- Stacking frame components
- Mounting screws (8x)
- Rails and support brackets
- User manual
Ensure all parts are present before beginning assembly.
Assembly Steps
Follow these steps to assemble the stacking kit:
1. Attach the side rails to the designated panels of the stacking kit frame. Ensure they are securely fastened.
2. Begin assembling the main frame of the stacking kit by connecting the base and side panels. Use the provided screws (8x) to secure these components.
3. Continue assembling the frame, ensuring all connections are tight and the structure is stable.
4. Attach the top panel or support structure to the assembled frame.
5. Secure the washing machine within the stacking kit. This step may involve attaching brackets or guides to the washing machine itself. Ensure a minimum clearance of 17mm is maintained around the appliance as indicated.
6. Place the assembled stacking kit onto the washing machine. Ensure it is level and stable.
7. Insert the provided screws to secure the stacking kit to the washing machine, following the specific mounting points indicated in the diagrams.
8. Slide the top panel into place, ensuring it aligns with the frame.
9. Secure the top panel, possibly using additional screws or locking mechanisms.
10. Ensure the entire structure is rigid and all components are firmly attached.
11. Carefully lift and place the dryer onto the top of the stacking kit. Observe the correct orientation for placement.
⚠️ Important: Ensure the dryer is correctly positioned and stable on the stacking kit. Incorrect placement can lead to instability or damage.
12. Align the dryer with the stacking kit's support points.
13. Secure the dryer to the stacking kit using the provided hardware. This may involve screws or clips.
14. Double-check all connections and ensure the stacked unit is stable and secure.
15. Final check of all assembled parts and appliance stability.
Safety Precautions
⚠️ Electrical Hazard: Ensure all electrical connections are safe and properly insulated.
❌ Incorrect Installation: Do not stack appliances if the kit is not properly assembled or if the weight limit is exceeded. This can cause serious injury or damage.
Always ensure the stacking kit is installed on a level and stable surface.
Refer to the specific model instructions for any variations.
