Aiper Scuba X1 Pro Robotic Pool Cleaner

Welcome

Thank you for choosing Aiper. You are now among millions who trust Aiper for pool maintenance and enjoy a clean pool.

This user manual will help you maintain your device and ensure it operates at maximum efficiency for years. Please take a moment to read it.

If you have any questions, please visit our website at www.aiper.com or contact our customer service team for assistance or more information.

Aiper Customer Service:

Email: service@aiper.com

Scan for Video Guide

Scan to Access Customer Support

Table of Contents

1. Important Safety Instructions
2. Product Components
3. Using Your Aiper Scuba X1 Device
4. Maintenance
5. Specifications
6. LED Indicator
7. Troubleshooting
8. Warranty

1. Important Safety Instructions

Please read this manual carefully and follow all warnings and instructions before using your Aiper Wireless Robotic Pool Cleaner (hereinafter referred to as the device). Failure to do so may result in electric shock, fire, or serious injury. Aiper is not responsible for any loss or injury resulting from the incorrect use of this device.

For your safety and the best performance of this device, please read and follow these instructions:

1. This device is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, including children, unless they have been given supervision or instruction concerning the use of the device by a person responsible for their safety.
2. Children should not play with the device. Cleaning and user maintenance operations should not be performed by unsupervised children.
3. Children should be supervised to ensure they do not play with the device.
4. Ensure children do not attempt to touch the device while it is operating.
5. Under no circumstances should children be allowed to climb on the device.
6. Do not operate the device when people or animals are in the pool.
7. While in operation, do not put your hands into any part of the device as it may cause injury.
8. Do not operate the device out of the water, as it may cause overheating.
9. Using a charging device suitable for one type of battery pack may create a risk of fire when used with another battery pack.
10. WARNING: Only use the detachable power supply unit supplied with this device to charge the battery.
11. The lithium battery in this device is a DC 21.6V, 10400mAh, 24-cell battery and is compatible with the GM95-252300-2FGN charger model. Before disposing of the device, the battery must be removed and disposed of in accordance with local laws and regulations.
12. This device is only compatible with C1264C6 model lithium battery packs.
13. This device contains batteries that can only be replaced by expert technicians. Please contact Customer Service to replace the battery.
14. This device contains non-replaceable batteries. When the battery reaches the end of its life, the device must be disposed of properly.
15. Be careful of the risk of short-circuiting the battery terminals with metal objects when the device is powered by a battery.
16. If a damaged device leaks an unknown liquid, avoid contact with the liquid. If you come into contact with foreign liquid, wash it off with water immediately, especially your eyes or other sensitive areas. Liquid from a damaged battery may cause skin irritation or burns.
17. Do not expose the device or battery to fire or extreme temperatures. Exposure to fire or temperatures above 130°C / 265°F may cause an explosion.
18. Before removing the battery for device disposal, unplug the device from the charger and turn off the device's power button.
19. The battery must be removed before the device is disposed of and disposed of in accordance with local laws and regulations.
20. Please dispose of used batteries in accordance with local laws and regulations.
21. Do not throw the device into a fire, even if it is severely damaged. Batteries can explode in a fire.
22. Before charging your device with the charger, ensure that the cover is closed and the charging port is dry. Your device should be kept in a cool, well-ventilated area while charging. Do not cover your device while charging, as this may cause overheating of the components.
23. WARNING: To reduce the risk of electric shock, replace a damaged cable immediately.
24. If the power cord is damaged, it must be replaced or repaired by a qualified electrician or Aiper Customer Service to prevent any hazards.
25. Do not attempt to repair a damaged or faulty power supply; do not use it thereafter.
26. The device's sealed drive kit should only be disassembled by certified professionals.
27. Use only as described in this manual. Use only manufacturer-recommended or sold accessories.
28. Do not operate your device simultaneously with other pool equipment such as pool filters, cleaners, or skimmers.
29. When placing your device in the water, the front of the device should face upwards, never upside down, and should not be thrown into the swimming pool.
30. Be careful of your steps when operating on the pool edge and ensure you maintain your balance.
31. Do not drop the device, puncture the cover, or intentionally damage the device in any way, otherwise the warranty may be voided.
32. To avoid RF exposure, it is recommended to maintain a distance of 20 cm or more between the person using the device and the device itself. Operation at closer distances is not recommended. The antenna used for this device's transmitter should not be co-located with any other antenna or transmitter.
33. Before performing user-maintenance operations such as cleaning the filter, disconnect the robotic pool cleaner from the mains power.
34. The charger must be unplugged before cleaning or performing maintenance on it.
35. If the charger will not be used for a long time, please unplug it.
36. When the device is not in use, store it in a closed, cool, and well-ventilated place.

37. CAUTION:

• FOR USE IN SWIMMING POOLS ONLY.
• DO NOT OPERATE THE PUMP DRY.
• TO REDUCE THE RISK OF INJURY, THE USER MUST READ THE USER MANUAL.
• FOR USE WITH APPROVED AIPER CHARGER ONLY, MODEL: GM95-252300-2FGN.

DO NOT LOSE THESE INSTRUCTIONS

2. Product Components

2.1 Package Contents

• Robotic Pool Cleaner*1
• Charging Station*1
• User Manual*1
• Charger*1
• Hook*1

2.2 Overview of Components

Robotic Pool Cleaner (Side View)

• 1 Top Cover
• 2 Wi-Fi Indicator
• 3 Power Button
• 4 Handle
• 5 Roller Brush
• 6 Filter Box
• 7 LED Status Indicator
• 8 OmniSense™ Sensor
• 9 Treads

3. Using Your Aiper Scuba X1 Pro Device

3.1 Operating Conditions

Please ensure the device is used only in the specified pool environment. Damage caused by use outside these conditions will not be covered by the warranty.

3.2 Downloading the App

Download the Aiper App to unlock more features of your device: You can download and install the Aiper App by scanning the QR code below or by searching for Aiper in your app store.

Notes:

• To ensure full App functionality on your smartphone or device, iOS 12.0 or later or Android 8.0 or later is required.
• After setup, follow the App's instructions to complete registration, login, and network setup.

3.3 Network Setup

The device will enter Network Setup Mode upon first power-on. If this process is interrupted, press and hold the button for 5 seconds to re-enter Network Setup Mode.

Once in Network Setup Mode, please select either Bluetooth Setup or QR Code Setup.

• Bluetooth Setup: Enable Bluetooth on your phone and grant permission for the Aiper App to access it. In the App, tap the [+] icon in the top right corner, then select Add via Bluetooth. The App will detect nearby Bluetooth devices. Select your network, enter your Wi-Fi password, and tap Next to complete network setup.
• QR Code Setup: Open the App and tap the [+] icon in the top right corner, then select Add via QR Code. Scan the QR Code on your Aiper device. Once the device is recognized, follow the App's instructions to connect to the device's Wi-Fi. After connecting, return to the App and follow the prompts to complete network setup.

Wi-Fi Network Requirements: Use a 2.4GHz or 2.4/5GHz mixed network.

3.4 Charging

CAUTION: Please fully charge the device before using it to clean the pool. Do not charge the device in direct sunlight. It is recommended to have at least a 3.5 m (11.5 ft) distance between your pool and the charging location. For best results, your charging location should have Wi-Fi coverage, as this will speed up OTA updates.

Charging Options:

Charging Station

1. Charging Station Setup: Place the support leg on the charging panel. Then, attach the front cover.
2. Before charging, ensure that both the charging cradle and the device are dry. Do not place a wet device on the station to charge. For best charging quality, gently dry the metal contact points at the bottom of the device with a paper towel or a dry cloth.
3. Connect the charger's cable to the charging port on the station and plug the adapter into any suitable outlet. Place the dry device onto the charging station. The LED status indicator on the device will flash while charging and turn solid green when the charging process is complete.

Charging Port:

1. Before charging, remove the charging port cover and ensure the charging port is dry. If there is water or moisture in the port, wipe it dry with a clean cloth before charging the device.
2. Connect the charger to the device's charging port, then plug the charger into any suitable outlet. The LED status indicator will flash while charging and turn solid green when the charging process is complete.

3.5 Button Descriptions

• Mode Button: Change or select the cleaning mode.
• Power Button: Turn the device On/Off.
• Cleaning Power Button: Increase or decrease the cleaning power.

Combination Button Functions:

• Network Setup Mode: To enter network setup mode, press and hold the [Power Button] and [Mode Button] simultaneously for 5 seconds. The device will remain in network setup mode for 300 seconds, so be sure to complete the setup quickly.
• Factory Reset: To reset the device to factory settings, press and hold the [Power Button] and [Mode Button] simultaneously for 5 seconds. This will erase all user settings, cleaning data, and personalized settings.

If all LED indicators are constantly lit, other than the cleaning modes shown above, it indicates the device is performing a special task.

3.6 Cleaning Modes

• Smart Mode: The device will clean the pool floor and walls sequentially, and will also clean the water line while cleaning the walls.
• Floor Mode: The device will clean the pool floor by following an S-shaped path without climbing walls or cleaning walls.
• Wall Mode: The device will clean the pool walls by following a Y-shaped path and will also clean the water line simultaneously. The pool floor will not be cleaned in this mode.
• Waterline Mode: The device will move horizontally and clean along the pool's waterline. When it encounters corners or obstacles along the pool walls, it will descend from the waterline, move to a different wall, or bypass obstacles and continue cleaning.

Note: The device's cleaning path may be updated with firmware versions. For the most accurate information, please refer to the device's actual performance or the latest official manual.

3.7 Cleaning Intensity

• Energy-Saving Cleaning (ECO): Recommended for pools with low water turbidity and very few visible debris. ECO mode reduces the device's power consumption, extending battery life.
• Adaptive Cleaning (AUTO): Recommended if you are unsure about the pool's turbidity. AUTO mode automatically adjusts cleaning performance based on the pool's condition, optimizing the X1 Pro device's battery life while ensuring effective cleaning.
• High-Performance Cleaning (MAX): Recommended if there is high water turbidity and visible debris or clumps. MAX mode increases cleaning performance but also increases the X1 Pro device's power consumption, shortening battery life.

3.8 Filter Selection

Two filters of different thicknesses are available: the replaceable MicroMesh™™ ultra-fine filter and the filter box. The replaceable MicroMesh™™ ultra-fine filter can capture small particles such as silt and some algae, typically from 3-10µm. If visible debris is minimal (e.g., stones, leaves, sand, debris, hair) and the water appears cloudy or has algae, it is recommended to use both the filter box and the replaceable MicroMesh™™ ultra-fine filter. In case of significant visible debris, it is recommended to use only the filter box and not the replaceable MicroMesh™™ ultra-fine filter.

3.9 Cleaning Process

1. Press and hold the [Power Button] for 2 seconds to turn the device on/off.
2. Briefly press the [Mode Button] to select one of the four cleaning modes: Smart Mode, Floor Mode, Wall Mode, and Waterline Mode. After selecting your desired cleaning mode, place the device in the pool without delay. After a short period submerged in water, the device will start the cleaning task of the selected mode.
3. When the device is initially submerged in water, selecting a mode that includes cleaning the pool floor will trigger the mapping process. The device will clean along the pool floor contour to create an underwater map without climbing walls. After successful mapping, re-mapping for the same pool is not necessary. However, before each cleaning, the device needs to move briefly on the floor to reposition itself.

Once mapping is complete, the device will automatically recognize the pool's shape and initiate an S-shaped cleaning path while cleaning the pool floor. When cleaning is finished, the device will return to the waterline, come to the surface, and remain at the waterline for 5 minutes. Users can safely remove the device during this time.

If the device remains at the waterline for more than 5 minutes, it will return to the pool floor, staying near the wall. Users can attach the hook to any standard telescopic pool pole (not included) to extend, hook, and pull the device out of the water.

6. Before storing or charging the device, allow it to drain any stored water.

4. Maintenance

4.1 Cleaning the Filter Box

1. Place the device on a flat surface and lift the top cover.
2. Remove the filter box by lifting it by the handle.
3. Press the latch on the filter box and lift the top cover handle to open it.
4. Empty the filter box and remove the replaceable MicroMesh™™ ultra-fine filter. Remove the A, B, C, and D latches on the replaceable MicroMesh™™ ultra-fine filter's rubber strip from the retaining slot.
5. Rinse the replaceable MicroMesh™™ ultra-fine filter and the filter box separately. Rinse the inside and outside of the replaceable MicroMesh™™ ultra-fine filter. Scrub by hand if necessary.
6. After drying the replaceable MicroMesh™™ ultra-fine filter and filter box, insert the filter into the filter box and place the filter box back into the device. Ensure that A on the filter box aligns with A on the replaceable MicroMesh™™ ultra-fine filter. Pull up the four corners A, B, C, and D on the rubber strip sequentially. Ensure the replaceable MicroMesh™™ ultra-fine filter is secured in the retaining slot. After installation, check that all rubber strips are properly seated in the retaining slot.

Notes:

• After each cleaning, remove the device from the pool without delay and clean the filter box immediately. Avoid leaving the device in the pool for extended periods.
• The replaceable MicroMesh™™ ultra-fine filter and filter box do not need to be dried after each cleaning and are only recommended to prevent odors caused by moisture.
• When drying or storing your device, it is recommended to store it in a well-ventilated area away from direct sunlight, including the replaceable MicroMesh™™ ultra-fine filter and filter box.
• The replaceable MicroMesh™™ ultra-fine filter can capture small particles such as silt and some algae, typically from 3-10µm. If visible debris is minimal (e.g., stones, leaves, sand, debris, hair) and the water appears cloudy or has algae, it is recommended to use both the filter box and the replaceable MicroMesh™™ ultra-fine filter. In case of significant visible debris, it is recommended to use only the filter box and not the replaceable MicroMesh™™ ultra-fine filter.
• It is recommended to use a high-pressure water gun for thorough cleaning, to clean the replaceable MicroMesh™™ ultra-fine filter and filter box. Some wear may be visible on the surface of the replaceable MicroMesh™™ ultra-fine filter after a few uses, but this does not affect its performance.
• The replaceable MicroMesh™™ ultra-fine filter is a consumable item and should be replaced every 30 uses to maintain effective filtration.

4.2 Cleaning the Impeller

1. Use a flat-head screwdriver to open the drain cover.
2. After removing the drain cover, remove the impeller cover to expose the impeller.
3. Clean any debris wrapped around the impeller.
4. After cleaning the impeller, reattach the impeller cover and then the drain cover.

4.3 Replacing the Treads

1. Remove the side cover plate from the device: Tilt the device on its side, use a flat-head screwdriver to release the 4 clips on the side cover plate, and pull the side cover plate upwards.
2. Remove the screws and guide sleeve from the rear wheel.
3. Remove the rear wheel and tread by gently pulling each part.
4. Align the gears of the spare tread with the gears on both wheels. Reattach the rear wheel and tread, ensuring they are secured along the gear covers.
5. Install the rear wheel guide sleeve and ensure the three shafts align with the hole on the device.
6. Tighten the screws and reattach the side cover plate. Repeat this step for the other tread.

4.4 Replacing the Roller Brush

1. Remove all silicone collars from your current roller brush.
2. After removal, take the spare roller brush and align the silicone collars with the slots. Press each slot to secure the new roller brush to your device. Repeat this step for the other roller brush.

4.5 Shutting Down and Storing Your Aiper Device

For off-season periods such as winter or long holidays when your Aiper device will not be used, follow the steps below to ensure your device remains in the best condition:

1. Fully charge the device before storing it. Ensure the device is turned off and disconnected from the charger before storage.
2. Clean the entire device, including the top and bottom covers, wheels, brushes, and charging port, to remove dirt.
3. Wipe the device with a cloth or soft cloth and ensure the charging port cover is properly closed.
4. Store the device in its original packaging in a cool, dry, and well-ventilated place.
5. Charge the battery every six months to maintain its health.

5. Specifications

Symbols:

• --- Direct current.
• ~~~ Alternating current.
• [Class II equipment symbol] Class II equipment.
• [Switching power supply symbol] Switching power supply.
• [DC power connector polarity symbol] Polarity of DC power connector.
• [Short-circuit protected transformer symbol] Short-circuit protected safety isolation transformer.
• [Indoor use only symbol] For indoor use only.
• If the pins of the plug parts are damaged, the power supply unit should be scrapped.
• Read the user manual.

6. LED Indicator

To Reset Your Device: Press and hold for ten seconds, and the device will be reset to factory settings.

7. Troubleshooting

8. Warranty

This product has passed quality control and safety tests performed by our technicians.

1. This product comes with a warranty covering the battery and motor of your product from the date of purchase. Legal provisions regarding warranty conditions in the respective country apply accordingly.
2. The product will be voided if it has been modified, misused, or repaired by an unauthorized person.
3. This warranty covers only manufacturing defects and does not cover damage caused by misuse by the product owner.
4. An order number or proof of purchase must be presented during any warranty claim.
5. This is an additional warranty provided by AIPER INTELLIGENT SARL, located at 43-47 avenue de la Grande Armée, 75116 Paris, France. This warranty does not affect the consumer's free remedies for non-conformity against the seller as required by law.
6. Warranty Email: service@aiper.com

Declaration of Conformity (CE)

Shenzhen Aiper Intelligent Co, Ltd. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and 2011/65/EU. The full text of the Declaration of Conformity can be found at the following link: https://eu.aiper.com/aiper-europe-doc-user-manual/

The EU declaration of conformity can be requested at the following address:

AIPER INTELLIGENT SARL
43-47 avenue de la Grande Armée, 75116 Paris, France

[Recycling symbol] This symbol indicates that this product should not be treated as household waste. Instead, it should be delivered to an appropriate collection point for the recycling of electrical and electronic equipment.