ZYXEL PMG1005-T20C
GPON SFU with 1-port GbE LAN
The Zyxel PMG1005-T20C GPON SFU with 1-port GbE LAN features one GPON uplink and one GbE LAN downlink, serving as a simple bridge to provide Gigabit data access to subscribers. Its Gigabit Passive Optical Networking (GPON) Point-to-Multi-Point (P2MP) architecture enables service providers or system integrators to deliver Gigabit broadband access with minimal CAPEX investment, making it competitive and popular among operators.
Incorporating the Zyxel PMG1005-T20C offers enhanced flexibility for system integrators to deploy their service networks, as GPON networks support various deployment scenarios within a single service site. Instead of deploying a specific type of home gateway, the two-box solution allows system integrators to provide multiple product combinations to meet different scenario requirements through a consistent user interface.
The Zyxel PMG1005-T20C is fully compliant with the ITU-T G.984 GPON standard and has been field-proven for E2E Interoperability with Zyxel GPON OLT product series, making it an excellent choice as an entry-level GPON Single Family Unit (SFU).
Key Features
- Gigabit data access via fiber
- Simple bridge design for flexible deployment
- Field-proven interoperability with Zyxel OLT
Benefits
High-speed Gigabit offers seamless triple-play services
As broadband wireline access technology evolves, the number of subscriptions and the required bandwidth capacity per home or enterprise unit increase. High-bandwidth services, such as 4K/8K HD video streaming and cloud-based data storage, have become trends, significantly changing user behavior. This evolution drives a strong demand for higher access speeds to migrate to the Gigabit era. The Zyxel PMG1005-T20C GPON SFU with 1-port GbE LAN acts as a simple bridge, enabling service providers to address Gigabit data access for subscribers under the P2MP structure and realize high-quality triple-play services, including voice, data, and video over fiber optics.
Speed Comparison:
- Fiber: Typical speed of over 1 Gbps within 20 km (Download speed: 2.5 Gbps/upload speed: 1 Gbps).
- G.fast: Typical speed of up to 1 Gbps within 300-400 m (Download speed: 800 Mbps/upload speed: 200 Mbps).
- VDSL/ADSL: Typical speed of up to 2-100 Mbps within 800-1.5 km.
Same user experience with advanced product combinations
With the P2MP structure, service providers can offer various service packages to meet different user requirements cost-effectively. The Zyxel PMG1005-T20C can function as a Layer-2 Optical Network Terminal (ONT), connecting to any Layer-3 devices such as routers, WiFi APs, and home gateways, based on subscriber preference. As WLAN technology and other gateway interface requirements evolve rapidly, the two-box solution allows service providers to substitute the second box while maintaining the same user interface if users continue to use the PMG1005-T20C as their GPON access terminal.
Product Combination Example: The PMG1005-T20C unit can be deployed alongside a Router, Gateway, or Wireless AP to create flexible end-user solutions.
Zyxel E2E readiness improves product time-to-market
The Zyxel PMG1005-T20C is part of Zyxel's GPON ONT product series, guaranteeing End-to-End (E2E) interoperability (IOP) with Zyxel's OLT PON line cards. The PMG1005-T20C is equipped with Zyxel-specific OMCI parameters that integrate seamlessly with Zyxel's EMS and OLT systems. With E2E-capable parameters, Zyxel provides standard OMCI parameters along with specific parameters that assist service providers in diagnosing, operating, and managing their fiber networks. This E2E-ready solution helps service providers shorten product time-to-market and reduce significant IOP investments.
Network Diagram Description: The diagram illustrates a typical network setup involving a Service Provider utilizing Zyxel OLTs managed by NetAtlas EMS, overseen by an Administrator. The PMG1005-T20C is shown deployed at the customer's premises.
Specifications
System Specifications
GPON Features
- Complies with ITU-T G.984/G.988 GPON standard, including G.984.1 general characteristics, G.984.2 Physical Media Dependent (PMD) layer specifications, G.984.3 transmission convergence layer specifications, G.984.4 ONT management and control interface specification, and G.988 ONU management and control interface (OMCI) specification.
- Complies with class B+ type PMD.
- Transmission rate: 2.488 Gbps (Downstream) / 1.244 Gbps (Upstream).
- Wavelength: 1490 nm (Downstream) & 1310 nm (Upstream).
- Physical distance reach up to 20 km.
- Dynamic Bandwidth Allocation (DBA).
- Configurable AES DS and FEC DS/US.
- GPON Encapsulation Method (GEM) supports Ethernet packets.
- Supports GEM header removal/insertion and data extraction/segmentation (GEM SAR).
- Flexible mapping between TCON and GEM port.
- Supports up to 8 T-CONTs with 32 GEM ports.
- 8 priority queues (US) on each GPON T-CONT.
Layer 2 Networking Features
- MAC address learning.
- MAC filtering.
- Multicast transparent.
- IPv6 address transparent.
- PPPoE pass through.
Multicast
- IGMP v1/v2/v3 snooping.
- IGMP immediate leave.
- IPv6 MLD v1/v2 snooping.
VLAN Functional Specifications
- VLAN IEEE 802.1Q.
- Protocol based VLAN support.
- 1:1 VLAN, N:1 VLAN, VLAN transparent bridge.
- LAN port-based VLAN tag add and tag removal.
- Q in Q VLAN.
QoS
- Per-port QoS and CoS mapping according to IEEE 802.1q and IEEE 802.1p priority.
- Rate limitation.
- Flow mapping based on 802.1p/VLAN ID.
- Supports SP/WRR/SP+WRR.
Management
- Standard OMCI (ITU-T G.984.4).
- Telnet (CLI).
- Web GUI (HTTP).
- Firmware upgrade via FTP/TFTP/HTTP.
Hardware Specifications
- WAN: One Giga optical interface (SC/APC).
- LAN: One 10/100/1000 auto MDI/MDI-X RJ-45 port.
- Reset: One reset/restore factory default button.
- Power switch: One push type button.
- LEDs indicators: Power, Passive optical network (PON), LOS, LAN.
- Power supply: 12 V DC/0.5 A.
Power Consumption
3.262 watt max.
Physical Specifications
- Item dimensions (WxDxH): 109.4 x 83.6 x 36.5 mm (4.3" x 3.29" x 1.44").
- Item weight: 113 g (0.25 lb.).
- Packing dimensions (WxDxH): 131 x 130 x 95 mm (5.16" x 5.12" x 3.74").
- Packing weight: 342 g (0.75 lb.).
Environmental Specifications
Operating Environment
- Temperature: 0°C to 45°C (32°F to 113°F).
- Humidity: 10% to 90% RH (non-condensing).
Storage Environment
- Temperature: -30°C to 70°C (-22°F to 158°F).
- Humidity: 10% to 95% RH (non-condensing).
Certification
- EMC: CE.
- Safety: CE LVD.
- Energy saving: ErP.
Package Contents
- GPON SFU.
- Power adapter.
- Ethernet cable.
- Safety warning & DoC letter.
- Quick start guide.
Application Diagram
The application diagram illustrates the data flow from a Central Office, featuring a GPON OLT, connected via fiber optic cable to the Zyxel PMG1005-T20C. From the PMG1005-T20C, connections extend to a High-end Gateway, which supports both WiFi 11ac (5 GHz) and WiFi 11 b/g/n (2.4 GHz) standards. These wireless networks then connect to various Home/Office devices, including an IP STB, TV, Game Console, and NAS. The diagram also indicates separate connections for Video, Internet, and Voice services, using icons to represent Fiber, Ethernet, WiFi 2.4 GHz, and WiFi 5 GHz connections.
Interface Description
LED Indicators
- POWER: Indicates the power status of the device.
- PON: Indicates the status of the GPON network connection.
- LOS: Indicates a Loss Of Signal on the PON port.
- LAN: Indicates the status of the LAN Ethernet connection.
Ports
- PON port: The fiber optic interface for connecting to the GPON network.
- LAN port: An Ethernet port for connecting devices.
- Reset button: A button to restore the device to its factory default settings.
- Power On/Off button: A button to turn the device on or off.
For more product information, visit us on the web at www.zyxel.com.
Copyright © 2019 Zyxel Communications Corp. All rights reserved. Zyxel, Zyxel logo are registered trademarks of Zyxel Communications Corp. All other brands, product names, or trademarks mentioned are the property of their respective owners. All specifications are subject to change without notice.
