IQ Sound IQ-6812DJBT Operation Manual

Panel Function

The main control panel features the following functions:

• 1. MODE: Selects input mode (Bluetooth, FM, AUX, USB, TF Card).
• 2. MIC. PRI: Microphone Priority - reduces music volume when a microphone is active.
• 3. REPEAT: Repeats the current track or all tracks.
• 4. EQ: Selects equalizer presets for different sound effects.
• 5. LED MODE: Controls the LED lighting modes.
• 6. MIC. VOL: Adjusts the volume for the microphones.
• 7. ECHO: Adjusts the echo effect for the microphones.
• 8. MIC1: Microphone input jack 1.
• 9. MIC2: Microphone input jack 2.
• 10. LINE IN: Analog audio input via 3.5mm jack.
• 11. DC5V OUT MAX 1A: USB port for charging external devices (5V, 1A max).
• 12. TF CARD: Slot for Micro SD cards.
• 13. USB: Port for USB flash drives.
• 14. TREBLE: Adjusts the high-frequency sound.
• 15. BASS: Adjusts the low-frequency sound.
• 16. TWS: True Wireless Stereo - enables pairing two speakers for stereo sound.
• 17. VOICE CUT: Removes vocals from music for karaoke.
• 18. REC: Starts recording audio input (e.g., microphone).
• 19. REC PLAY: Plays back recorded audio.
• 20. Sound Change: Alters the sound of the microphone (e.g., male/female voice).
• 21. PREV: Skips to the previous track or FM station.
• 22. PLAY: Plays or pauses the current track; initiates auto-scan for FM.
• 23. NEXT: Skips to the next track or FM station.

Remote Control Function

The remote control provides access to the following functions:

• 1. POWER: Turns the unit on or off.
• 2. MODE: Selects input mode.
• 3. LED: Controls LED lighting.
• 4. MUTE: Mutes or unmutes the audio output.
• 5. Control prev key: Skips to the previous track.
• 6. Play/pause control key: Plays or pauses the audio.
• 7. VOL+: Increases the master volume.
• 8. Control next key: Skips to the next track.
• 9. VOL-: Decreases the master volume.
• 10. REPE: Repeats the current track.
• 11. E/Q: Selects equalizer presets.
• 12. 0-9: Numeric keys for direct track selection (USB/TF Card) or station tuning (FM).

Operation Instructions

Karaoke & Wireless Microphone

1. Insert a wired microphone into the MIC2 jack.
2. Adjust the MIC VOL knob for desired microphone volume.
3. Adjust the ECHO knob for desired echo depth.
4. Turn on the wireless microphone.
5. Adjust the MIC VOL knob and ECHO knob for the wireless microphone as needed.

BT Connection

1. On your device (phone, tablet, notebook), go to Settings and enable Bluetooth.
2. Scan for available devices and select "IQ-6812DJBT" to pair.
3. Once paired, audio files can be played through the speaker. Unpair when finished.

FM Function

1. Press MODE to select FM radio mode.
2. Press PLAY/PAUSE for automatic channel searching and saving.
3. Use PREV and NEXT to switch between saved stations.

Using Microphone

1. Plug your microphone into the designated microphone jack on the main control panel.
2. Use the MIC VOL knob to control the microphone's volume level.
3. Use the ECHO knob to adjust the microphone's echo effect.

Using Auxi LINE IN (3.5mm)

1. Connect an audio source (phone, tablet, notebook) using a 3.5mm Aux cable to the LINE IN jack.
2. The speaker will automatically switch to AUX mode or select LINE IN via the MODE button.
3. Remove the cable when finished.

Using Guitar Jack

1. Plug your guitar into the guitar jack on the main control panel.
2. Use the dedicated Guitar VOL knob (if available, otherwise use MIC VOL) to control the guitar's volume level.

The BASS and TREBLE knobs on the control panel can be used to adjust the sound when using MICRO SD, USB, or FM. The EQ button can be used to select preset sound effects.

USB and Micro SD Card

• Supports MP3 playback via USB flash drives (up to 64GB).
• Supports MP3 playback via Micro SD cards (up to 64GB).

Charging Instructions

• Full charging takes approximately 8 hours.
• The unit charges when the power cord is connected and the power switch is ON.
• The charging indicator light on the front panel turns OFF when the battery is fully charged.
• A fully charged battery provides approximately 1.6 hours of playback under standard usage.

Accessories Included

The package contains:

• 1 x Instruction book
• 1 x Power Line
• 1 x Wireless Microphone
• 1 x Remote control
• 1 x Aux Line (likely refers to a 3.5mm cable, though not explicitly stated as included in the list, it's mentioned under accessories)

Main Technical Parameters

Warranty

Basic Warranty Statement

Supersonic Inc. ("Supersonic") warrants this product to the original purchaser ONLY, to be free from defects in materials and workmanship under normal use, for ninety (90) DAYS from the date of original purchase. Proof of purchase (receipt) is required.

For additional information, please visit http://www.supersonicinc.com/warranty.

FCC Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.