IQ sound IQ-8265BT Backpack Party Speaker

Safety Instructions

• Do not use this product near sources of water.
• Clean only with a dry cloth.
• Do not block any ventilation openings.
• Do not install near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, objects have fallen into the apparatus, or it has been dropped.

Specifications

Battery Information

The device is equipped with an integrated lithium battery. The battery cannot be replaced. Do not attempt to remove the battery from the device.

Icon and Function Description

Speaker Ports and Controls:

• 1. INPUT 5V: [DC 5V] Charging Port
• 2. CHARGE LED: Charging Indicator Light
• 3. LED SW: [LED SW] Button to turn the speaker's light on/off.
• 4. TF: [TF] Card Slot
• 5. POWER/VOLUME: [Power/Volume Knob] Rotary knob for power on/off and volume adjustment.
• 6. USB: [USB] Disk Slot
• 7. AUX IN: [AUX IN] Audio Input Jack
• 8. MIC IN: [MIC IN] Microphone Input Jack
• 9. MODE/M.VOL+: [MODE]/[Mic Volume +] Button to switch modes or increase microphone volume.
• 10. LED MODE: [LED MODE] Button to change LED light modes.
• 11. REPEAT/M.VOL-: [REPEAT]/[Mic Volume -] Button to repeat songs or decrease microphone volume.
• 12. PREV/REC: [PREV]/[REC] Button for previous track/channel or recording.
• 13. NEXT/MIC.PRI: [NEXT]/[MIC.PRI] Button for next track/channel or microphone priority function.
• 14. PAUSE/PLAY TWS: [PAUSE]/[PLAY]/[TWS] Button for play/pause music or TWS connection.

Remote Control Functions:

The remote control requires 2 x AAA batteries (not included). Operate directly in front of the speaker display for best results.

• ON/OFF: [Power] Button
• Mode Switch: Cycles through BT/AUX/FM/USB/TF modes.
• Sound effects choices: POP, CLASSIC, ROCK, JAZZ, NORMAL.
• Volume Up/Down: Adjusts speaker volume.
• Previous song/channel: Navigates to the previous track or FM channel.
• Next track/channel: Navigates to the next track or FM channel.
• Play / Pause: [▶️⏸️] Controls music playback.
• Single cycle: Repeats the current song (display shows 'ONE').
• Music orders in USB disk or TF card: Repeats all songs (display shows 'ALL').
• Silent Mode: Mutes the audio.

Operation

Power On/Off

Turn the 'POWER VOLUME' (5) rotary knob clockwise until its blue light shows to turn on the Speaker. Turn left until the blue light turns off to turn off the Speaker.

Bluetooth Connection

The Speaker automatically enters Bluetooth pairing mode with a prompt tone after turning on. The display shows 'blue'. Search and connect to the Bluetooth name 'IQ-8265BT' on your smartphone or other device. Once paired, it will automatically connect to the last connected device. Each product can connect to one Bluetooth device at a time.

Mode Switching

Press the "MODE" (9) button to cycle through modes: Bluetooth, USB, TF, AUX, FM. The display will show the current mode.

AUX Audio

Connect an audio cable (not included) to the AUX IN (7) slot on the Speaker and to your audio device (e.g., MP3, MP4). Press the "MODE" (9) button to select AUX mode. Music will play from the connected device.

USB Disk Mode

Insert a USB disk (Ver.2.0, Capacity 32GB, File format type: MP3, WAV) into the USB Slot (6). The Speaker automatically enters USB MODE and plays music from the disk.

TF Mode

Insert a Micro SD/TF Card (Capacity: 32GB, File format type: MP3, WAV) into the TF Slot (4). The Speaker automatically enters TF MODE and plays music from the card.

FM Mode

Press the "MODE" (9) button to switch to FM radio mode. Press the TWS button (14) to auto-search channels. The scan may take a few minutes to register all stations. Use the 'POWER VOLUME' knob (5) to adjust volume. Use PREV/REC (12) for previous channel and NEXT/MIC.PRI (13) for next channel.

Microphone Input

Plug a 6.5mm microphone cable (included) into the MIC IN (8) socket on the Speaker. Connect the other end to the microphone. Slide the microphone's power button to turn it on/off.

To adjust microphone volume, press and hold MODE/M.VOL+ (9) to increase volume (display shows up to 16 for max). Press and hold REPEAT/M.VOL- (11) to decrease volume.

To activate 'MIC priority' function, press and hold MIC.PRI (13). The display shows 'ON'. Press and hold again to turn off.

Repeat Function

In USB or TF mode, short press the REPEAT/M.VOL- (11) button to repeat the current song ('ONE'). Press again to repeat all songs ('ALL').

LED Lamp Key

With the Speaker on, press the LED SW (3) button to turn the speaker's light on or off. Short press the "LED MODE" (10) button to change the light mode.

TWS Connection

TWS connection is available for two of the same 'IQ-8265BT' models. Turn on both speakers. Press and hold the TWS button (14) on both speakers simultaneously. Their displays will show 'ON'. On your phone's Bluetooth list, you will find only one 'IQ-8265BT' pairing name. To turn off TWS, press and hold the TWS button (14) again.

Charging the Speaker

Plug the USB-C end of the charging cable (included) into the INPUT 5V (1) port on the speaker. Connect the USB-A end to a power source (5V, minimum 1A, maximum 3A). The CHARGE LED (2) stays red while charging and turns off when charging is complete.

Contents

• Party Speaker x 1
• Wired Microphone x 1
• Remote Control x 1
• Charging Cable x 1
• Manual x 1

Battery Information (Remote Control)

Requires: 2 x AAA batteries (NOT INCLUDED). To insert batteries, slide open the battery compartment. Insert 2 x AAA batteries, ensuring correct polarity (+/-). Replace the battery cover securely.

Disposal and Environmental Protection

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.