Grille Installation Instruction
Part#: T65150C-J
Application: For 2007-2009 Toyota Toyota Tundra TOP PANEL
Revision: 130501
Parts List
| Item | QTY | Part Name | Description | Item | QTY | Part Name | Description |
|---|---|---|---|---|---|---|---|
| 1 | 2 | Screw | 8#×1" | 2 | 2 | Flat Nut | 8# |
Install Notes: Overlay ✔️ Replacement ❌ Drill ✔️ Cut ❌
Installation Steps
| Step | Description | Illustration |
|---|---|---|
| 1 | Identify the grille & hardware with parts list. | A visual representation of a chrome billet grille is shown. |
| 2 | Align & Center Billet Grille into opening. Then mark home locating on vertical bars. | N/A |
| 3 | Drill a 3/32 hole in the marked locations. | N/A |
| 4 | Insert the #8 screws through the holes you drilled. | N/A |
| 5 | Re-Align Billet Grille and thread with provided flat nuts. | N/A |
| 6 | Installation completed!!! | N/A |
The instruction here is for your reference only. You may need to bend the billet grille bars or tabs a little bit to adjust to fit. APS strongly recommends the professional installer for best result.
Please use masking tape and tape the OEM grille shell along the edge to protect your vehicle during installation.
APS is not responsible for any damage caused by the installation. Thank you for choosing our product!
