JLab JBuds Air Sport True Wireless Earbuds
We are thrilled that you are using JLab Audio! We are proud of our products and stand behind them 100%.
Your Warranty & Support
All warranty claims are subject to JLab Audio approval and our discretion. Keep your receipt to ensure warranty validity.
CONTACT US
Contact us at support@jlabaudio.com or visit intl.jlabaudio.com/contact
REGISTER TODAY
intl.jlabaudio.com/register
Product updates, Usage tips, FAQs, and more.
First-Time Setup
1. Automatic Earbud Connection
A. Remove the earbuds from the charging case and remove all stickers.
B. Press and hold both touch sensors for at least 3 seconds to turn on the power. The left earbud will turn white, and the right will flash blue and white to indicate they are ready to connect to your device.
2. Connect to Bluetooth
Select 'JLab JBuds Air Sport' in your device's settings. Two beeps followed by white light indicate you are connected.
Diagram: Phone settings showing Bluetooth menu with 'JLab JBuds Air Sport' selected.
Adding New / Additional Bluetooth Devices:
Turn OFF Bluetooth on any connected devices that were previously paired with the earbuds. Turn ON Bluetooth on the new device. Remove the earbuds from the case. The earbuds will automatically enter Bluetooth pairing mode. Select 'JLab JBuds Air Sport' in your device's settings to connect.
In the Box
- Earbuds
- Charging Case
- Ear Tips: S, M, L, Cloud Foam
Button Functions
Left Touch Sensor
- LOWER VOLUME: Tap once
- SIRI (iOS) or 'OK GOOGLE' (ANDROID): Tap twice
- PREVIOUS TRACK: Press and hold for at least 1 sec
- CHANGE EQ: Tap three times
- POWER ON: Press and hold for at least 3 sec
Right Touch Sensor
- RAISE VOLUME: Tap once
- PLAY / PAUSE: Tap twice
- NEXT TRACK: Press and hold for at least 1 sec
- ANSWER CALL: Tap once
- END CALL: Tap twice
- REJECT INCOMING CALL: Press and hold for at least 1 sec
- AMBIENT MODE ON / OFF: Tap three times
- POWER ON: Press and hold for at least 3 sec
Audio Cues
- POWER ON: Chime
- BLUETOOTH CONNECTED: 2 beeps
- LOW BATTERY: "Low Battery" (less than 20%)
- POWER OFF: Chime
Turning Off Earbuds Without Charging Case:
Go to your device's Bluetooth settings and forget JBuds Air Sport. The earbuds will turn OFF after 3 minutes.
Equalizer Modes
Tap the left earbud three times to cycle through EQ settings. Audio cues will indicate the different EQ setting options (JBuds Air Sport will cycle through 3 different EQ settings).
- JLab SIGNATURE: JLab C3™™ signature sound with amplified vocals and bass
- BALANCED: Balanced sound without any extra amplification
- BASS BOOST: Enhanced bass and sub-bass
Charging the Earbuds
The earbuds will turn off and begin charging when placed in the charging case. Indicator lights blink white when charging and turn solid white when charging is complete.
Charging Case: Connect your JBuds Air Sport to a computer or any other USB charger with 5V 1A (or less).
Diagram: Earbuds placed in charging case. Charging case connected via USB.
When the earbuds are removed from the case, they will automatically turn ON and reconnect to your device.
Fitting
Diagrams showing how to insert and adjust the earbuds for a secure fit.
Troubleshooting
No Sound in Left Earbud or Earbuds Disconnecting (Manual Reset)
- Go to your device's Bluetooth settings and forget JBuds Air Sport.
- Open the charging case and leave both earbuds in the case. Start with ONE earbud and quickly tap the touch sensor 4 times. The indicator light will flash blue 4 times, then turn solid blue. Leave the earbud in the case.
- Repeat with the other earbud. Quickly tap the touch sensor 4 times. The indicator light will flash blue 4 times, then turn solid blue.
- Remove both earbuds from the charging case and hold them within 5 cm of each other. Wait until the left earbud's indicator lights solid white and the right flashes blue and white. You are now ready to pair the earbuds to your Bluetooth device.
Bluetooth Device Not Connecting / Reconnecting
- Go to your device's Bluetooth settings and forget JBuds Air Sport.
- Turn Bluetooth OFF and ON.
- Remove the earbuds from the case. Wait until the left earbud's indicator lights solid white and the right flashes blue and white.
- Select 'JLab JBuds Air Sport' in your device settings to reconnect.
Instructional videos available at: intl.jlabaudio.com/manuals
Quick Tips
- Bluetooth pairing is from the right earbud. For the most stable connection, keep your device on your right side or in your right pocket.
- If you prefer to use only one earbud, you must use the right one.
- Choosing the correct ear tip can make a huge difference in sound quality by creating a proper seal. Try all ear tips for the best results.
- Only ONE Bluetooth device can be connected at a time. Turn off Bluetooth on unwanted devices and turn on Bluetooth on the device you wish to connect.
WARNING
Dry the earbuds thoroughly before placing them in the charging case. If the earbuds are damp or wet, it will damage the charging case. Warranty is void if the charging case is damaged by water/sweat.
- Avoid extreme heat, cold, and humidity.
- Avoid dropping or crushing the earbuds.
- Earwax buildup on the earbud tips can impair sound quality. Gently remove wax with a cotton swab or other small tool to improve sound quality.
- If you experience discomfort or pain, try lowering the volume or discontinuing use for a while.
- If you frequently experience discomfort while using the product, stop use and consult a doctor.
- We recommend treating your earbuds like a pair of fine sunglasses and storing them in a safe place when not in use.
Shop Products | Product Notifications | Burn-in Your Headphones
JLab Audio + Burn-in Tool
Visit: intl.jlabaudio.com
