GE LED+ PAR38 RGB Speaker Bulb Quick Start Guide
Model Numbers: PC93130056, PC93130160
Brand: GE Lighting (a Savant Company)
Getting Started Guide
- Screw in the bulb: Ensure the bulb is properly installed in the fixture.
- Turn on the bulb: Switch on the power to the fixture.
- Connect via Bluetooth: On your Bluetooth-compatible device, search for the discoverable device named "GE PAR38 RGB Speaker Bulb".
- Play Music: Connect the bulb to play music, podcasts, or other audio content.
- Control Audio and Light: Use your Bluetooth device or the provided remote to control music playback, change colors, adjust light modes, modify brightness, assign audio channels, and turn the bulb on/off.
Remote Control Functions
The included remote allows control over the GE LED+ PAR38 RGB Speaker Bulb.
| Button/Action | Function |
|---|---|
| [Power Button] (On/Off) | Turns the bulb on or off. |
| [Search Icon] (Parent Search) | Initiates a search for connected devices. |
| [Party Icon] (Party Mode) | Activates a dynamic lighting mode, often synchronized with music. |
| [Music Sync Icon] (Light will change in-sync with music) | Synchronizes light changes with the rhythm of the music. |
| [Fade Icon] (Switch to smooth and fade modes) | Allows switching between smooth transitions and fade lighting effects. |
| [Brightness Up Icon] / [Brightness Down Icon] (W Icon) | Decreases or increases the brightness of the light. |
| [Left Channel Icon] / [Right Channel Icon] / [Mono Icon] | Assigns the target bulb to the left audio channel, right audio channel, or mono (combined) audio. |
| [Previous Track Icon] | Plays the previous song. |
| [Play/Pause Icon] | Plays or pauses the current audio track. |
| [Next Track Icon] | Plays the next song. |
| [Volume Up Icon] / [Volume Down Icon] (VOL+ / VOL) | Increases or decreases the audio volume. |
| [Color Cycle Icon] | Cycles through available bulb colors. |
Bulb Linking and Stereo Setup
GE LED+ Speaker bulbs can automatically sync with other GE LED+ speaker bulbs (A21, BR30, PAR38 models) to create a surround sound experience.
Linking Additional Bulbs: Turn on a new bulb, and it will automatically sync with the parent bulb or the first bulb set up in the system. For optimal syncing, subsequent bulbs should be within 25 feet (approx. 7.6 meters) of the parent bulb.
Individual Control: Bulbs can be controlled individually by using the remote when in close range of a specific bulb. Alternatively, all synced bulbs can be controlled together when the remote is in close range of the parent bulb.
Audio Channel Assignment:
- Mono Setup (1 Bulb): A single bulb setup for mono audio.
- Stereo Setup (2 Bulbs): For stereo sound, assign one bulb to the left channel and the other to the right channel. Point the remote at the target bulb and press the [Left Channel Icon] or [Right Channel Icon]. The bulb will flash once to confirm. To reduce signal interference, power on only the target bulb and turn off other speaker bulbs during assignment.
- Mixed Setup (3+ Bulbs): For setups with three or more bulbs, you can assign them to directional channels (left/right) or uniform sound (mono).
Note: Channel mixing is exclusive to LED+ Speaker Color-Changing bulbs and not available on other LED+ Speaker bulb models.
Important Notes
- For optimal sound quality, install the lamp with the base facing upwards (+/-60°) to allow water to drain from the speaker.
- The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. GE Lighting, a Savant company, uses these marks under license. Other trademarks and trade names belong to their respective owners.
- GE is a trademark of General Electric Company, used under trademark license.
Technical Information
FCC ID: PUU-LEDX14DPAR38M
IC: 10798A-LED14DPAR38
Model Numbers: LED+14DPAR38M/WWRGBSPK, LED+14DPAR38M/DLRGBSPK
Visit: gelighting.com/led-plus
